OPENING ThE TAILGATE
Pull the tailgate handle
01 upward and lower the
tailgate. Support cables hold the tailgate open.
for more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
01
POWER SEAT ADJUSTMENTS (if so equipped)
To slide the seat forward or backward, push the
control switch
01 forward or backward.
To adjust the angle of the seatback, push the switch
02 forward or backward.
SeAT LifTe R (if so equipped for driver’s seat)
To adjust the angle and height of the seat cushion,
push the front or rear end of the switch
01 up or down.
MAnu AL LuMBAR S uPPORT (if so equipped for driver’s seat)
To adjust the lumbar area, move the lever
03 up or down.
f
or more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
REMOTE k EYLESS ENTRY SYSTEM (if so equipped)
The Remote k eyless entry System allows you to lock or
unlock your vehicle and turn on the interior lights.
To lock the vehicle, press the
button on your keyfob.
To unlock the driver’s door, press the
button on
your keyfob.
Press the
button again within 5 seconds and all
doors will unlock.
for more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
0102
03
5
first drive features
To view detailed in\fstructional videos\f regarding these a\fnd other features\f \fplease go to www.nissanownersin\hfo.mobi
STARTING/STOPPING ThE ENGINE
depress the brake pedal.
Move the shift lever to the P (PAR k) position.
Turn the ignition switch to the START position.
T uRnin G THe enGine Off
Move the shift lever to the P (PAR k) position, apply the parking brake and turn the ignition
switch to the LOCk position.
for more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
6
first drive features
To view detailed in\fstructional videos\f regarding these a\fnd other features\f \fplease go to www.nissanownersin\hfo.mobi
OUTSIDE MIRROR CONTROL SWITCh (if so equipped)
The outside mirror control switch is located on the
driver’s side door panel.
To select the left or right mirror, move the switch
01 .
Adjust each mirror to the desired position using the
switch
02 .
To prevent accidentally moving the mirror, move this
switch
01 to the center “neutral” position.
POW eR fOLdin G OuTSide M iRRORS (if so equipped)
To open or close the mirrors, push the switch
03 .
f
or more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
02
01
0203
AUTOMATIC DRIvE POSITIONER (if so equipped)
Two positions for the driver’s seat, accelerator and
brake pedals and outside mirrors can be stored in
the automatic drive positioner memory.
follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PAR k) position.
• Place the ignition switch in the ON position.
• Adjust the driver’s seat, accelerator and brake pedals and outside mirrors to the desired
positions using the adjusting switches for each feature.
• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, accelerator and brake pedals and outside mirror positions are now set to
your preference.
These memorized positions can also be linked to your ni SSAn intelligent key®.
for more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
