2013 MERCEDES-BENZ S-Class display

You can enter the characters using either the
character bar or the number keypad. In the
selection list, you selec
tanentry to copy it to
the address entry menu.
Option 1: city list with character bar
X Call up the city list with character bar
(Y page 157).
The alphabetically sorted city list shows the
first available entries. Entering characters using the character
bar
X
Select N by turning COMAND controller
0031001C0032 and confirm with 0021.0002
N character entered by user
0003 ANTICOKE characters automatically
added by COMAND
0026 Listentry tha tmost closely resembles the
current entry by the user
0025 To switch to the selection list
0023 To delete an entry
0024 Characters not currently available
0014 Characters currently available 0015
Currently selected character
0016 Character bar
0017 To cancel an entry
0018 List
The list 0018shows all available town names
beginning with N .T
he list entry that is best
suited to previous user entries is always
highlighted in the first position 0026,
NANTICOKE in the example.
All characters that have been entered are
displayed in black, the letter N in the
example 0002.The letters that are added
automatically by COMAND are displayed in
gray 0003,ANTICOKE in the example.
Character bar 0016shows the letters still
available for selection in black 0014.These can
be selected; in the example, the letter O is
highlighted 0015.Which characters remain
available depends on the characters already
entered by the user and on the data stored in
the digital map. Characters that are no longer
available are shown in gray 0024.
X Select E ,
W , space,
Y in order and confirm
each with 0021. Entering characters using the number
keypad
X
Press the telephone keypad's number key
0036 twice in quick succession, to enter
the letter N .
The character appears at the bottom of the
display when the key is pressed. The first
available letter is highlighted. 134
At
ag lanceCOMAND

You see which characters you can enter with
that key. Each time the key is pressed, the
nex tcharacter is selected.
Example: key 0036:
R press once = M
R press twice =N
R press three times =O
X Wait until the character display goes out.
The entries matching your input are shown
in the list.
X Enter E ,
W , space,
Y with the corresponding
keys.
i The space is entered using number key
0004.
Further functions in the list with
character bar
X To delete characters: select0004by sliding
001C0006 and turning 0031001C0032the COMAND
controller and press 0021to confirm.
X To delete an entry: select0004and press
and hold 0021the COMAND controller until
the entire entry has been deleted.
X To switch the character set: select
001D and press 0021to confirm.
X To cancel an entry: select the0002symbol
in the bottom left of the character bar and
press 0021to confirm.
or
X Press the 0001back button.
The address entry menu appears.
X To accept the first list entry: press and
hold 0021the COMAND controller until the
address entry menu appears.
The accepted list entry is shown there.
Calling up the list as aselection list
Select the desired city fro mthe selection list.
If there are several entries for a city or if
several cities of the same name are stored,
then 0003 is highlighted in the character bar.
X Press 0021the COMAND controller. It is also possible to switch the city list to the
selection list at any time during character
input.
X Slide 0021the COMAND controller
repeatedly until the city list appears as a
selection list.
or
X Select 0003in the character bar by turning
0031001C0032 the COMAND controller and press
0021 to confirm.
Option 2: city list as selection list
COMAND either shows the selection list
automatically or you can call up the selection
list from the list with character bar.
The example shows the selection list after the
city NEW YORK has been entered. The entry is
highlighted automatically. X
Confirm NEW YORK with COMAND
controller 0021.
The address entry menu appears. You can
now enter a street, for example. At
ag lance
135COMAND Z

Switching the sound on or off
Switching audio and video sources on/off
X
Press the 0029button on the multifunction
steering wheel.
The sound from the respective audio or
video source is switched on or off.
i When the sound is off, the system
displays the 002Fsymbol in the status line.
When you change the audio or video
source, or adjust the volume, sound
automatically switches on again.
i Even if the sound is switched off, you will
still hear traffic and navigation system
announcements.
Switching off traffic and navigation
announcements completely
X Traffic announcements: press the0029
button until the 000Dmessage disappears
from the status bar of the display.
A confirmation tone sounds.
X Navigation announcements: during an
announcement, press the 0029button on
the multifunction steering wheel.
Switching traffic and navigation
announcements on again
X Traffic announcements: press and hold
down the 0029button until the 000Ddisplay
appears in the status bar.
A confirmation tone sounds.
X Navigation announcements: select the
0039 symbol in the navigation menu bar
and press 0021to confirm.
i The navigation announcements are
activated again if you switch COMAND off
and on again or start a new route guidance. Adjusting the volume Adjusting the volume for the audio or
video source
X
To adjust: turn thumbwheel 0002.
or
X Press the 000For0010 button on the
multifunction steering wheel.
The volume of the currently selected audio
or video source changes.
You can also adjust the volume for the
following:
R traffic announcements
R navigation announcements
R phone calls
R the Voice Control System (see the separate
operating instructions)
Adjusting the volume for navigation
announcements
During a navigation announcement:
X Turn thumbwheel 0002.
or
X Press the 000For0010 button on the
multifunction steering wheel.
Adjusting the volume for phone calls
You can adjust the volume for hands-free
mode during a telephone call.
X Turn thumbwheel 0002.
or
X Press the 000For0010 button on the
multifunction steering wheel. 138
At
ag lanceCOMAND

Adjusting the soun
dsettings Calling up the sound menu
You can make various sound settings for the
differen taudio and video sources. This means
that it is possible to set more bass for radio
mode than for audio CD mode, for example.
You can call up the respective sound menu
from the menu of the desired mode.
The example describes how to call up the
sound menu in radio mode.
X Press the 0010function button.
The radio display appears. You will hear the
last station played on the last waveband. X
Select Sound by sliding
001C0006and turning
0031001C0032 the COMAND controller and press
0021 to confirm.
You can now set the treble and bass or the
balance and fade rfor radio mode.
Adjusting treble and bass
X Select Treble or
Bass in the sound menu
by turning 0031001C0032the COMAND controller
and press 0021to confirm.
An adjustmen tscale appears. Setting the treble
0002
Lastsetting selected
0003 Current setting
X Select a setting by turning 0031001C0032the
COMAND controller and press 0021to
confirm.
The setting is stored and you exit the menu.
Adjusting balance and fader
With the balance function, you can control
whether the sound is louder on the driver's or
front-passenger side.
The fader function is used to control whether
the sound is louder in the fron torthe rear of
the vehicle.
X Select Balance/Fader in the sound menu
by turning 0031001C0032and press 0021to confirm. 0002
Current setting
X Select a setting by sliding 002A001C0006or003C001C003D the
COMAND controller and press 0021to
confirm.
The setting is stored and you exit the menu. At
ag lance
139COMAND Z

Surround sound
General information
If your vehicle is equipped with the harman/
kardon ®
Logic 7 ®
surround sound system,
you can provide the optimum sound
experience for every passenger.
The harman/kardon ®
Logic7 ®
surround
sound system is available for the following
operating modes:
R radio (FM only)
R satellite radio
R audio CD
R audio DVD (MLP™, dts™, PCM and
Dolby ®
Digital audio formats)
R MP3
R Media Interface
R video DVD (PCM, dts™ and Dolby ®
Digital
audio formats)
R AUX
Because some DVDs contain both stereo and
multichannel audio formats, it may be
necessary to set the audio format
(Y page 232).
i The Logic7 ®
ON function enables
playback of stereo recordings, for instance,
with a surround sound experience for every
passenger. It enables optimum playback of
music and films on CDs, audio DVDs or
video DVDs with multichannel audio
formats, such as MLP™, dts™ or Dolby ®
Digital. This results in sound
characteristics like those intended by the
sound engineer when the original was
recorded.
i If you select Logic7 ®
OFF , the sound
system plays all playable formats as stored
on the medium. Due to the design of the
passenger compartment, an optimum
audio experience cannot be guaranteed for
all passengers.
i Discs which support the audio formats
mentioned have the following logos: Dolby
®
Digital dts™
Switching surround sound on/off
Example: switching on surround sound for
radio mode
X
Press the 0010function button.
The radio display appears. You will hear the
last station played on the last waveband. X
Select Sound by sliding
001C0006and turning
0031001C0032 the COMAND controller and press
0021 to confirm.
X Select 3D Sound and press
0021to confirm. 140
At
ag lanceCOMAND

Rear Seat Entertainment System
Components Overview
The Rear Seat Entertainment System
comprises:
R
two screens for the rear behind the front-
sea thead restraints
R two remote controls
R a CD/DVD drive
R AUX jacks on both screens (display AUX)
and on the CD/DVD drive (drive AUX)
R two sets of cordless headphones At
ag lance
143COMAND Z

Switching the screen on/off
If the SmartKey in the ignition lock is in
position
0or 1or if the SmartKey is not in the
ignition lock, the rear screens will switch off
after 30 minutes. Before the screens switch
off, they show a message to this effect.
You can switch the screens back on.
However, this will discharge the starter
battery.
X Point the remote control at the rear-
compartmen tscree nwhich has been
selected for remote operation.
X Press button 0002on the remote control.
The respective rear screen switches on or
off.
i You can only switch the screens on using
the remote control if the ignition is
switched on.
Switching the button lighting on/off
X Press button 0003on the remote control.
Depending on the previous status, the
button lighting is switched on or off.
i If you do not use the remote control for
about 15 seconds, the button lighting
switches off automatically.
Switching the sound on/off (corded
headphones only)
X Press button 0024on the remote control.
The sound is switched on/off.
Selecting amenu/menu item and
confirming your selection
X Press the 0009000C000A buttons to
selec tthe menu/menu item and press the
000C button to confirm.
CD/DVD drive and AUX jacks The CD/DVD drive is located in the center
behind the front seats. 0002
CD/DVD slot
0003 AUX, right-hand (R) jack for audio signal
0026 AUX, left-hand (L) jack for audio signal
0025 AUX, jack for video signal (V)
0023 CD/DVD eject button
The AUX jacks shown are for the AUX drive.
Identical jacks can be found on the right-hand
side of the rear-compartment screens (AUX
display), (Y page 144). At
ag lance
145COMAND Z

Cordless headphones
Overview
The cordless headphones for the rear compartmen
tcan be recognized by the "DIGITA LAUDIO"
inscription on the battery compartment cover and by the fact that there is no SPLITVIEW
symbol (Y page 126)(Y page 126). 0002
Volume control
0003 To select a screen for the headphones
0026 Battery compartment cover
0025 To switch the cordless headphones on/off
0023 Indicator lamp with various displays (Y page 147)
X Gently pull both sides of the headphones out and adjust the fit of the headphones by pulling
the headband in the direction of the arrow.
Switching the cordless headphones on/
off
X Press button 0025.
Depending on the previous status, the
headphones are switched on or off. To save
the battery, the headphones are switched
off automatically if they do not receive a
signal within three minutes.
Adjusting the volume of the headphones
X Turn volume control 0002until you have
reached the desired volume.
i If you have connected corded
headphones to a rear-compartment
screen, you can adjust the volume by pressing buttons
0014on the remote control
(Y page 129).
Selecting ascreen for the headphones
X Move push slider 0003toL(left-hand screen)
or R(right-hand screen). 146
At
ag lanceCOMAND