2013 JEEP WRANGLER UNLIMITED lock

[x] Cancel search: lock

Page 382 of 655

JEEP WRANGLER UNLIMITED 2013  Owners Manual additional three seconds will make the radio display the
Song Title all of the time (press and hold again to return
to normal display).
RW/FF
Pressing the RW (Rewind) or FF (Fast Forward) buttons
caus

Page 383 of 655

JEEP WRANGLER UNLIMITED 2013  Owners Manual SET Button – To Set the Pushbutton Memory
When you are receiving a channel that you wish to
commit to pushbutton memory, press the SET button.
The symbol SET 1 will now show in the display window.
S

Page 386 of 655

JEEP WRANGLER UNLIMITED 2013  Owners Manual Controlling The iPod  Or External USB Device
Using Radio Buttons
To get into the iPod  /USB/MP3 control mode and access
a connected audio device, either press the “AUX” button
on the radio facep

Page 388 of 655

JEEP WRANGLER UNLIMITED 2013  Owners Manual List Or Browse Mode
During Play mode, pressing any of the buttons described
below, will bring up List mode. List mode enables
scrolling through the list of menus and tracks on the
audio device.
• TU

Page 397 of 655

JEEP WRANGLER UNLIMITED 2013  Owners Manual NOTE:
• Continuous use of the Recirculation mode may make
the inside air stuffy and window fogging may occur.
Extended use of this mode is not recommended.
• The use of the Recirculation mode in c

Page 402 of 655

JEEP WRANGLER UNLIMITED 2013  Owners Manual • Air Conditioner Control
Press this button to turn on the air
conditioning during manual operation
only. When the air conditioning is
turned on, cool dehumidified air will
flow through the outlets

Page 407 of 655

JEEP WRANGLER UNLIMITED 2013  Owners Manual STARTING AND OPERATINGCONTENTS  STARTING PROCEDURES ............... .410
▫ Manual Transmission – If Equipped ....... .410
▫ Automatic Transmission – If Equipped ..... .410
▫ Normal Starting

Page 408 of 655

JEEP WRANGLER UNLIMITED 2013  Owners Manual  FOUR–WHEEL DRIVE OPERATION
(COMMAND-TRAC I  OR ROCK-TRAC  ) . . . .428
▫ Operating Instructions/Precautions ....... .428
▫ Shift Positions ....................... .430
▫ Shifting Procedure