2013 HONDA INSIGHT Owners Manual

ÛÝÛ
Ý
ÛÝ
You can customize some of the
vehicle control settings to your
pref erence. Here are the settings
you can customize:
METER SETUP
When you want to change the
vehicle control settings, press the
INFO ( / ) button to select CHG
SETTING, then press the SEL/
RESET button. Each time you press the INFO ( /
) button, the screen changes as
shownonthenextpage.Pressthe
INFO ( / ) button until you see
the setup you want to customize,
then press the SEL/RESET button
to enter your selection.
If you do not make any changes,
select ‘‘EXIT.’’ The display returns to
the normal display.
You can also use the select/reset
knob in the instrument panel. Turn
the knob to select a setting and press
it to enter your selection.
If you want the settings as they were
when the vehicle lef t the f actory,
select DEFAULT ALL, as described
on page .
LIGHTING SETUP
DOOR SETUP
117
Customize Settings
Multi-Inf ormation Display
94
12/07/13 16:49:17 31TM8630_099
Inst rument s and Cont rolsTOC
2013 Insight

Ý
ÛÛÝ
Multi-Inf ormation Display
95
NORMAL DISPLAY
U.S. METER SETUP
Seepage96
LIGHTING SETUP
Seepage104
: Press the SEL/RESET button.
: Press the INFO button .
: Press the INFO button . : Press and hold the INFO ( / ) button. DOOR SETUP
See
page 108
Canada
12/07/13 16:49:23 31TM8630_100
Inst rument s and Cont rolsTOC
2013 Insight

Û
Ý
ÛÝ
ÝÛ
LANGUAGE SELECTION
ADJUST OUTSIDE TEMP.
DISPLAY
Here are the f our custom settings
forthemetersetup:
TRIP A RESET with REFUEL
Each time you press the INFO ( / ) button, the screen changes as
shown in the illustration. Press the
INFO ( / ) button until you see
the setting you want to customize,
then press the SEL/RESET button
to enter your selection. While ‘‘METER SETUP’’ is shown,
press the SEL/RESET button to
enter the customize mode. METER COLOR CHANGE DISPLAY KM/MILES
ELAPSED TIME RESET
Meter Setup
Multi-Inf ormation Display
96
: Press the SEL/RESET button.
: Press the INFO button .
: Press the INFO button . See
page 103
Seepage101
See
page 97 Seepage 98 Se
epage99 See page
100
12/07/13 16:49:34 31TM8630_101
Inst rument s and Cont rolsTOC
2013 Insight

ÛÝÛÝ
Language Selection
There are three language selections
you can make: English, French, and
Spanish. To choose the language you
want, f ollow these instructions:
You can choose this item to
customize f rom ‘‘METER SETUP’’
by pressing the INFO ( / ) button
repeatedly. Press the SEL/RESET button to see
the selections.
Select the desired language by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customizable item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘LANGUAGE SELECTION’’ and
repeat the procedure again.
CONT INUED
Multi-Inf ormation Display
97
12/07/13 16:49:42 31TM8630_102
Inst rument s and Cont rolsTOC
2013 Insight

ÛÝ
ÛÝ
Adjust Outside Temp. Display
If you sometimes f ind that the
temperature reading is a f ew
degrees above or below the actual
temperature, you can adjust it by
f ollowing these instructions: Adjust the outside temperature value
by pressing the INFO ( / ) button
repeatedly. Press the SEL/RESET
button to set the desired value.
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customizable item screen.
If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘ADJUST OUTSIDE TEMP.
DISPLAY’’ and repeat the
procedure again.
You can choose this item to
customize f rom ‘‘METER SETUP’’
by pressing the INFO ( / ) button
repeatedly.
Press the SEL/RESET button to
enter the setting.
Multi-Inf ormation Display
98
Canadian models
Canadian models
U.S. models
U.S. models
12/07/13 16:49:51 31TM8630_103
Inst rument s and Cont rolsTOC
2013 Insight

ÛÝ
ÛÝ Press the SEL/RESET button to see
the selections.
Select ON or OFF by pressing the
INFO ( / ) button, then enter
your selection by pressing the SEL/
RESET button.
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customizable item screen.
To cause Trip A and average fuel for
trip A to reset every time you ref uel
your vehicle, f ollow these
instructions:
You can choose this item to
customize from ‘‘METER SETUP’’
by pressing the INFO ( / )
button repeatedly. If the ‘‘SETTING INCOMPLETE’’
message appears, go back to ‘‘TRIP
A RESET with REFUEL’’ and repeat
the procedure again.
Trip A Reset With Ref uel
CONT INUED
Multi-Inf ormation Display
99
12/07/13 16:49:59 31TM8630_104
Inst rument s and Cont rolsTOC
2013 Insight

ÛÝÛÝ
µ
µ
µ
Elapsed Time Reset
You can choose this item to
customize from ‘‘METER SETUP’’
by pressing the INFO ( / )
button repeatedly. Press the SEL/RESET button to see
the selections.
Select the desired setting by
pressing the INFO ( / ) button,
then enter your selection by pressing
the SEL/RESET button.
There are three elapsed time reset
choices you can make:
IGN OFF The elapsed time is
reset when you turn the ignition
switch to the LOCK (0) position.
TRIP A The elapsed time is reset
when Trip A is reset.
TRIP B The elapsed time is reset
when Trip B is reset.
Multi-Inf ormation Display
100
12/07/13 16:50:06 31TM8630_105
Inst rument s and Cont rolsTOC
2013 Insight

ÛÝ
When your selection is successf ully
completed, the display changes as
shown above, and then goes back to
the customizable item screen. If the ‘‘SETTING INCOMPLETE’’
message appears, go back to
‘‘ELAPSED TIME RESET’’ and
repeat the procedure again.
To change the displayed
measurement in the trip computer
and trip inf ormation and to switch
between kilometers and miles, f ollow
these instructions:
You can choose this item to
customize from ‘‘METER SETUP’’
by pressing the INFO ( / )
button repeatedly.
CONT INUED
Multi-Inf ormation Display
Display K m/Miles
101
12/07/13 16:50:13 31TM8630_106
Inst rument s and Cont rolsTOC
2013 Insight