2013 Citroen C4 PICASSO Owner's Manual

255
6
Safety
IUF: seat suitable for the installation of an
ISOFIX U niversal seat, " Forwards-facing"secured using the top strap to the top
tether on ISOFIX seats. IL- SU: seat suitable for the installation of anIsofix Semi- Universal seat either:


- "rearwards-facing" fitted with a top belt
or a stay,

- "
forwards-facing" fitted with a stay,

- a sleeper cot fitted with an upper strap
or a sta
y.
Remove and stow the head restraintbefore installing a child seat on a passenger seat. Refit the head restraint
once the child seat has been removed. For advice on securin
g of the top belt, refer to
the "Isofix Mountings" section. X: seat not suitable for the installation of a
child seat or sleeper cot for the weight groupindicated.(1)
: The outer seat in row 2 must be adjusted
to 3 notches back from the fully forward position.

256
Safety














Locations for installing ISOFIX
child seats
mountings.
In the case of universal and semi-universal IS
OFIX child seats, the ISOFIX size category, determined by a letter from Ato G , is indicated on the childseat next to the ISOFIX logo.
* Sleeper cots cannot be fitted to the front passenger'sseat. **

The ISOFIX sleeper cot, secured to the lower rings of an ISOFIX seat,
occupies the full width of the rear seats.
Weight of the child/ indicative age
Less than 10 kg(group 0)Up to approx. 6 months
Less than 10 kg(group 0)
Less than 13 kg(group 0+)Up to approx. 1 year
From 9 to 18 kg (group 1)From approx. 1 to 3 years
Type of ISOFIX child seatSleeper cot*"rearwards-facing""rearwards-facing""forwards-facing"
ISOFIX size categoryFGCDECDABB1


Front passenger seat Not ISOFIX

Outer rear seats, fixed IL- SU ** IL-SUIL-SUIUF / IL- SUIUF / IL- SU

Outer rear seats, adjustable longitudinallyIL- SU ** IL-SUIL-SUIUF / IL- SUIUF / IL- SU


Centre rear seat XIL-SUIL-SUIUF / IL- SUIUF / IL- SU


Rear seat in the 3rdrowNot ISOFIX

257
6
Safety
IUF: seat suitable for the installation of an
ISOFIX U niversal seat, " Forwards-facing"secured using the top strap to the top
tether on ISOFIX seats. IL- SU: seat suitable for the installation of anIsofix Semi- Universal seat either:


- "rearwards-facing" fitted with a top belt
or a stay,

- "
forwards-facing" fitted with a stay,

- a sleeper cot fitted with an upper strap
or a sta
y.
Remove and stow the head restraintbefore installing a child seat on a passenger seat. Refit the head restraint
once the child seat has been removed. For advice on securin
g of the top belt, refer to
the "Isofix Mountings" section. X: seat not suitable for the installation of a
child seat or sleeper cot for the weight groupindicated.(1)
: The outer seat in row 2 must be adjusted
to 3 notches back from the fully forward position.

258
Safety
The incorrect installation of a child seat in a vehicle compromises the child's protection in
the event of an accident.
Remember to fasten the seat belts or the child seat harnesses keeping the slackin relation to the child's body to a minimum
,
even for shor t journeys.
For optimum installation of the "for ward facing" child seat, ensure that the back of the child seat is as close as possible to the backrest of the vehicle's seat, or in contactif possible
The head restraint must be removed beforeinstalling a child seat with a backrest on the passenger seat.
Ensure that the head restraint is stowed or attached securely so that it is not thrownaround the vehicle in the event of sharp braking.
Refit the head restraint as soon as the childseat is removed.












Advice on child seats


Children at the front
The legislation on carrying a child on the front passenger seat is specific to each country. Refer to the legislation in force inyour country.
Deactivate the passenger's airbag when a"rearward facing" child seat is installed on the front seat. Otherwise, the child would riskbeing seriously injured or killed if the airbag were deployed.


As a safety precaution, do not leave: - one or more children alone and
unsupervised in a vehicle, - a child or an animal in a vehicle which is exposed to the sun, with the windowsclosed,
- the keys within reach of children insidethe vehicle.To prevent accidental opening of the doors, use the "Child lock".Take care not to open the rear windows bymore than one third.To protect young children from the rays of the sun, fit side blinds on the rear windows.

Installing a booster cushion

The chest par t of the seat belt must be positioned on the child's shoulder withouttouching the neck.
Ensure that the lap part of the seat belt passes correctly over the child's thighs. CITROËN recommends the use of a booster seat which has a back, fitted with a seat belt guide at shoulder level.

259
6
Safety








Manual child lock

This mechanical system prevents opening of the rear door using its interior control.
The control is located on the edge of each rear door.


Locking
)Using the integral ignition key, turn the control as far as it will go:
- to the left on the left-hand rear door,
- to the right on the right-hand rear door.


Unlocking
)
Using the integral ignition key, turn thecontrol as far as it will go:


- to the right on the left-hand rear door,

- to the left on the right-hand rear door.

260
Practical information
This kit is installed in the storage box, under theboot floor. Complete s
ystem consisting of a compressor and a sealant car tridge which permits
temporary repair of a tyre so that you can rdrive to the nearest garage.It is designed to repair most punctures which could affect the tyre, located on the tyre tread or shoulder.




















Temporary puncture repair kit


Access to the kit

Depending on version, the kit is stowed under
the front passenger's seat or in the storagebox under the second row footwell.

261
7
Practical information
List of tools

* Depending on equipment. All o
f these tools are specific to your vehicle and can vary according to equipment. Do not use them for other purposes.
1.12 V compressor.
Contains a sealant cartridge for the
temporary repair of a tyre and can also be used for adjusting tyre pressures. 2. Chocks *
to immobilise the wheels of thevehicle. 3.
Bolt cover removal tool *
.
For removing the wheel bolt finishers (covers) on alloy wheels.4. Removable towing eye.
See the "Towing the vehicle" section.

262
Practical information
A. "Sealant" or "Air" position selector. B.
On "I"
/ off "O"
switch.C.
Deflation button. D.Pressure gauge (in bar and p.s.i.). E.Compartment housing:


- a cable with adaptor for 12 V socket,

- various inflation adaptors for
accessories, such as balls, bic
ycle
tyres...

Description of the kit


The speed limit sticker Imust be affixed to the vehicle's steering wheel to remind you that a wheel is in temporary use.
Do not exceed a speed of 50 mph
(80 km/h) when driving with a tyre repaired using this type of kit. F
.Sealant car tridge.G. White pipe with cap for repair.H.
Black pipe for inflation.I.
Speed limit sticker. The t
yre inflation pressures are given on this
label.