2013 Citroen C3 RHD display

.Familiarisation
15

Instrument panel
A.With the ignition on, the fuel gauge bars for
the fuel remaining should come on. B.With the engine running, the associatedlow level warning lamp should go off.C.With the ignition on, the oil level indicator should display "OIL OK"
for a few seconds.
If the levels are not correct, top up the level
whi
ch is low.
Warning lamps
1.With the ignition on, the orange and red
warn
ing lamps come on. 2. With the engine running, these warning lamps should go off.
If a warning lamp remains on, refer to the pageconcerned.

Switch panel

Lighting of the indicator lamp indicates the status of the corresponding function.A.Activation of the electric child lock.

or


Deactivation of the interior volumetric alarm.

Monitoring
23

25, 307
2
107
B
. Deactivation of the ESP/ASR system.
111
C. Deactivation of the Stop & Start system.
128

.Familiarisation
17

Electronic gearbox

Five or six speed electronic gearbox offering
the choice of the comfort of automated
operation or the pleasure of manual gear changing.1. Gear lever. 2.Steering mounted "-" control paddle. 3.Steering mounted "+" control paddle.
Display in the instrument panel
The gear engaged or the driving mode selected appears in the instrument panel.
N.Neutral.
R. Reverse.
1 to 5 / 6.Gears engaged.AUTO.Automated mode.


Starting and moving off
)
Select position N.)
Press the brake pedal firmly.)
Start the engine.)
Select automated mode (position A) or Amanual mode (position M) by moving thegear lever 1 ,


or
engage reverse by pushing the gear lever 1to position R.) Release the parking brake. )
Progressively take your foot off the brake pedal, then move off.

Driving safely
120

Familiarisation
18
Automatic gearbox

Starting and moving off
)Apply the parking brake. )Select position P
or N
. )Start the engine.)Press the brake pedal. )Release the parking brake. )Then select position R , D
or M . )Progressively take your foot off the brake pedal: the vehicle then moves off. This four speed automatic
gearbox offers the choice of the comfor t of automatic operation or
the pleasure of manual gear changing.1. Gear lever.2.
"S" (sport) switch. 3." 7" (snow) switch.

Display in the instrument panel

The driving mode selected and/or the gear engaged appear in the instrument panelscreen.
P.Park.
R. Reverse.
N.Neutral.D.Drive (automatic for ward drive).
S. Sport programme. 7Snow programme.
1 to 4. Gears engaged.-.
Invalid value in manual operation.

Driving safely
124

Familiarisation
20
Speed limiter "LIMIT"
1. Selecting / Switching off speed limiter mode. 2.
Decrease the programmed value.3.
Increase the programmed value.4.
Speed limiter on / off.


Cruise control "CRUISE"
1.Selecting / Switching off cruise control mode.
2. Decrease the programmed value. 3.
Increase the programmed value. 4.Cruise control Off / Resume.
The values must be set with the engine running.


Display in the instrument panel

The cruise control or speed limiter mode
appears in the instrument panel when it is
selected.

In order to be programmed or activated, the
vehicle speed must be higher than 25 mph (40 km/h), with at least fourth gear engaged
on a manual gearbox (second gear on an electronic or automatic gearbox).
Cruise control
S
peed limiter


Driving safely
131
1
33

.
21















































Eco-driving Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2emissions.
Optimise the use of your
gearbox
With a manual gearbox, move off gently, change up without waiting and drive by changing up quite soon. If your vehicle has the system, the gear efficiency indicator invites you to change up; it is displayed in theinstrument panel, follow its instructions.
With an automatic or electronic gearbox, stay in Drive "D"
or Auto "A",according to the type of gearbox, without pressing the accelerator pedal heavily or suddenly.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather than the brake pedal, and press the accelerator progressively. Thesepractices contribute towards a reduction in fuel consumption and CO2emissions and also helps reduce the background traffic noise.
If your vehicle has cruise control, make use of the system at speeds above 25 mph (40 km/h) when the traffic is flowing well.


Control the use of your electrical
equipment


Before moving off, if the passenger compartment is too warm, ventilate it by opening the windows and air vents before using the air conditioning.

Above 30 mph (50 km/h), close the windows and leave the air vents open.
Remember to make use of equipment that can help keep the temperaturein the passenger compar tment down (sunroof and window blinds...). Switch off the air conditioning, unless it has automatic digital regulation, as soon as the desired temperature is attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.

Switch off the headlamps and front foglamps when the level of light does not require their use.


Avoid running the engine before moving off, par ticularly in winter; your vehicle will warm up much faster while driving.


As a passenger, if you avoid connecting your multimedia devices (film, music, video game...), you will contribute towards limiting theconsumption of electrical energy, and so of fuel.
Disconnect your por table devices before leaving the vehicle.

1
Monitoring
23
Panel grouping together the vehicle operation indication dials and warning lamps.
























Instrument panels with manual gearbox
5.Display management button.Servicing information.
Adjust the time and choose units.
R
eset the service indicator.6.Instrument panel lighting button.Adjusts the brightness of the lighting of the
instruments and controls.
1.Rev counter. Indicates the speed of rotation of the engine (x 1 000 rpm). 2.Vehicle speed. Indicates the current speed of the moving
vehicle (mph or km/h). 3. Fuel level. Indicates the quantity of fuel remaining in
the tank. 4.Screen.
A.Ambient temperature. (°Celsius or °Fahrenheit)B.Gear efficiency indicator.C.Time.D.Engine oil level indicator. Appears a few seconds after switching on
the ignition, then disappears. E.Trip computer.F.Ser vice indicator. (miles or km) then, Total mileage. These two functions are displayed successively when switching on
the i
gnition.



Screen
For more information, refer to thesection on the button or function and its associated display.


Dials

Monitoring
24

















Instrument panels for electronic or automatic gearboxes
Panel grouping together the vehicle operation indication dials and warning lamps. Depending on the version, the instrument panel may have permanent
back-lighting.
1.Rev counter.Indicates the speed of rotation of the
engine (x 1 000 rpm).2.Vehicle speed.Indicates the current speed of the moving
vehicle (mph or km/h).3.Fuel level.Indicates the quantity of fuel remaining in
the tank. 4.Screen.5.Display management button.
Alternates display between range and trip mileage recorder.
Servicing information.
Resets the selected function to zero (trip
distance recorder or ser vice indicator
).
6.Instrument panel lighting button. Adjusts the brightness of the lighting of the
instruments and controls.


ScreenDials
For more information, refer to thesection on the button or function and its associated display.A
.Speed limiter (mph or km/h) or Cruise control.B.Gear efficiency indicator.C.Electronicorautomatic gearboxinformation.D.Range (miles or km) or Trip mileage recorder.E.
Ser vice indicator
r (miles or km), then Total mileage recorder. These two functions are displayedsuccessively when switching on the ignition
F.Engine oil level indicator. Appears a few seconds after switching on
the ignition, then disappears.

1
Monitoring
35
System which informs the driver when the next ser vice is due, in accordance with themanufacturer's servicing schedule.
The point at which the ser vice is due is
calculated from the last indicator zero reset. Itis determined by two parameters:


- the distance travelled,

- the time elapsed since the last ser vice.
Between 600 miles (1 000 km)and 1800 miles (3 000 km) remainbefore the next service is due
For a few seconds after the ignition is switched
on, the spanner symbolising the ser vice
operations comes on. The distance recorder
display line indicates the distance remainingbefore the next service is due.
Example:
1 700 miles (2 800 km) remain before the next service is due.


Less than 600 miles (1 000 km)remain before the next service is due
Example:560 miles (900 km) remain before
t
he next service is due.
For a few seconds after the ignition is switched on, the display indicates:
For a
few seconds after the ignition is switched
on, the screen indicates:
A few seconds after the i
gnition is switched on, the spanner goes off; the distance recorder fresumes its normal operation. The screen thenindicates the total and trip distances.
A few seconds after the ignition is switched on, the distance recorder resumes its normaloperation. The spanner remains on
toindicate that a service must be carried out soon.


More than 1800 miles (3000 km)remain before the next service is due

When the ignition is switched on, no ser vice
information appears in the screen.
Service indicator