24 4 T ire s and wheel s
Wheel bolts
Wheel bolts must always be tightened to the
correct torque .
The design of wheel bolts is matched to the
factory installed rims. If differen t rims are fit
ted, the correct wheel bolts with the r ight
length and correctly shaped bolt heads must
be used. This ensures that wheels are fitted
secure ly and that the brake system funct ions
correctly .
In ce rtain circumstances, you may not use
wheel bolts from a different vehicle -even if it
i s the same model~
page 2 71.
_& WARNING
Improperly tig htened o r maintained whee l
bolts can become loose ca using loss of
contro l, a co llision and serious persona l in
jury.
- Always keep the wheel bolts and the
threads in the wheel hubs clean so the
wheel bolts can turn easily and be prop
erly t ightened.
- Never grease or oil the wheel bo lts and
the threads in the wheel hubs. They can
become loose while driving if greased or
oiled, even if tightened to the specif ied
torque .
- Only use wheel bolts that belong to the
rim being installed .
- Never use different wheels bolts on your
vehicle .
-Always maintain the correct tighten ing
torque for the wheel bo lts to reduce the
risk of a wheel loss. If the tightening tor
que of the wheel bolts is too low, they
can loosen and com e out when the veh i
cl e is moving. If the tightening torque is
too high, the whee l bolts and threads
can be damaged and the wheel can be
come loose.
@ Note
The spec ified torq ue fo r the wheel bo lts is
90 ft lbs. (120 Nm) wi th a toler ance of
± 7,4 ft lbs. (± 10 Nm). Torque wheel bo lts diagonally. After changing a wheel, the
torque m
ust be checked as soon as possi
ble with a torque wrench -preferably by an
a uthori zed Audi dea ler or q ua lified work
shop .
Low aspect ratio tires
Your Audi is factory -equ ipped w ith low aspect
ratio tires . T hese tires have been thoroughly
tested and been se lected specifically fo r your
model for their superb perfo rmance, road fee l
and hand ling under a variety o f driv ing condi
t ions . As k your authorized A udi dealer for
more details .
T he low aspect ratio of these tires is ind icated
by a numera l of
55 or l ess in the tire's s ize
designation. The numeral represents the ratio
of the tire's sidewa ll height in relation to its
tread width exp ressed in percentage . Conven
tiona l tires have a he ight/w idth ratio of 60 or
more .
The performance of low-a spect-r atio tire s is
pa rt icul arly s ens itive to imp ro per i nfl ation
pressure. It is therefore import ant that low
aspect ratio tires are inflated to the specified pre ssure and that the inflation pressure is
r e gularly checked and maintained . Tire pres
sur es should be checked at l east once a
month and always before a long trip
~ page 233, Checking tire pressure.
What you can do to avoid tire and rim
damage
Low aspect ratio tires can be damaged mo re
easily by impact w it h potholes, c urbs, g ull ies
o r ridges on the road, pa rticul arly if the tire is
u nderinfla ted .
In orde r to minimize the occurrence of impact
damage to t he tires of your vehi cle, we recom
mend tha t you observe the following preca u
tions:
- Always ma inta in recommended inflation
pressu res. Check your tire pressure eve ry
2 ,000 miles (3,000 km) and add air if neces -
sary. ..,.
250 What do I do n ow ?
jack, always fully set the parking brake
and block the wheel diagonally opposite the wheel being changed with the fold
ing chocks or other objects . When one
front wheel is lifted off the ground, plac
ing the Automatic Transmiss ion in "P"
(Park) will
not prevent the vehicle from
moving.
- Before yo u change a wheel, be su re the
ground is leve l and firm. If necessa ry,
use a st urdy board under the jack.
- Always store the vehicle tool kit, the
jack * and the replaced ti re in the l uggage
compartment
r=>page 12 7.
(D Note
If you are chang ing the wheel on a steep
incline, use a rock or s imilar object to
bloc k the opposite wheel to prevent the
veh icle from mov ing.
@ Tips
Obey a ll laws.
Changing a wheel
When you change a wheel, follow these
quence described below step-by-step and in
exactly tha t order .
1. Remove the decorativ e wheel c over* or
the
wheel bol t cap s* . Fo r more details see
a lso
r=> page 250, Decorative wheel cov
ers
or ¢ page 251, Wheels with wheel
bolt caps.
2 . Loosen the wheel bo lts r=> page 251.
3 . Locate the proper mount ing point for the
jack and align the jack below that point
r=> page 252.
4 . Lift the car with the jack r=> page 252.
5. Remove the wheel with th e flat tire and
then i nstall the
spar e tire r=> page 253 .
6. Tighten all wheel bo lts light ly .
7 .
Low er the ve hicle w it h the jack.
8 . Use the wheel bolt wrench an d
firmly
tighte n all whee l bolts in a crisscross pa t
tern
r=> page 251.
9. Replace the decorative wheel c over* or
the
wheel bolt cap s*.
A WARNING
A lways read and follow all WARNINGS and
i nformation
r=> .& in Raising the vehicle on
page 252
and r=> page 254.
After changing a wheel
A wheel change is not complete without the
doing the following.
.. Always store the vehicle tool kit, the jack*,
and the replaced tire in the luggage com
partment
r=> page 127.
.,. Check the tire pressure of the spare tire as
soon as possible .
"' As soon as poss ible, have the
tighteni ng
torqu es
on all wheel bolts checked w ith a
t orque wrenc h. The correct tig hte ning tor
que is
90 ft lbs. (120 Nm).
.,. Have the flat tire
repl aced as soon as possi
b le.
(D Tips
- If
you not ice that the wheel bo lts ar e
corroded and difficult to turn while
changing a tire, they shou ld be rep laced
before you check the tightening torque.
- Dr ive at reduced speed until you have the
tightening torques checked .
Decorative wheel covers
Applies to vehicles: w ith decorative w hee l covers
The decorative wheel covers must be removed
first to access the wheel bolts .
Fig. 19 0 Cha nging a whee l: removing t he w heel cove r Ill>
254 What do I do now? Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern pointed in the right direction .
Using a spare tire w ith a tread pattern
intended for use in a specific direction
When using a spa re tire w ith a t read patte rn
i n tended fo r use in a specific direction, please
n ote t he followi ng:
- The direction of rotation is marked by a n
ar
row on the side of the tire .
-If the spare t ire has to be installed in the in
correct direction, use the spare tire only
tempora rily si nce the t ire will not be able to
achi eve its optimum perfo rma nce cha racter
i st ics w ith reg ard t o aquaplani ng, noise and
we ar.
- W e reco mmend t hat you pay pa rticular at
ten tion t o this fact during wet we ather and
t h at you a dju st you r spee d to m atc h ro ad
con ditions.
- R epl ace the fla t tire w ith a n ew one an d
have it ins talled o n your ve hicle as soon as
p oss ible to restore the handlin g ad vantages
of a uni direct io na l tire .
Notes on wheel changing
Please rea d the information c> page 238 , New
t ires and replacing tires and wheels
if you are
go ing t o use a spare tire which is d ifferent
from the tires on your ve hicle.
Afte r you chan ge a t ire :
-Check the tire pressure on the spare imme
diately after installation.
- Have the wheel bolt tightening torque
checked with a torque wrench as soon as possible by your authorized Audi dealer or
a qualified workshop .
- With steel and alloy wheel rims , the wheel
bolts are correctly tightened at a torque of
90 ft lbs . (120 Nm) .
- If you notice that the wheel bolts are cor
roded and difficult to turn while changing
a tire, they should be replaced before you
check the tightening torque . -
Replace the flat tire with a new one and
have it installed on your vehicle as soon as
possible. Remount the wheel cover .
Until then , drive with extra care and at re
duced speeds.
_& WARNING
-
- If yo u are going to e quip your ve hicl e
with tires o r rims which differ from those
which were facto ry installed, then be
sure to read the informati on
¢ page 238,
New tir es and replacing tires and
w he els .
- Always ma ke sure the damaged wheel o r
even a flat tire a nd the jack a nd tool kit
a re pro pe rly s ecu red in the luggage co m
p artm ent and are not lo ose in the pas
s en ger c ompa rtm en t.
- I n an acci dent or sudde n man euve r they
co uld fly forwa rd, inju ring anyone in the
ve hicl e.
- Always s to re damaged wh ee l, j ack and
t oo ls se cur ely in the l uggage co mpa rt
ment. Otherwise, in an accident or su d
de n maneuve r they co uld fly forwa rd,
causing inj ury to passe ngers in the ve hi
cle.
(D Note
Do not use comm erc ia lly availabl e tire
sea lants. O therwise, t he e lectr ical co mpo
n ents of t he ti re pressu re mo nitoring sys
tem * w ill no longe r work proper ly an d the
sensor fo r the tire pressure mo nitor ing
system* will have t o be replaced by a
q ualified wor ks ho p.
Transmission ... .... .... ... .. .. .. .... 86
multitronic . . . . . . . . . . . . . . . . . . . . . . . . 86
S tron ic . ... .... ...... ... .. .. .. .. .. 86
tiptronic . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Transm iss ion ma lf u nct ion (ind icator light) 92
Transport Canada . . . . . . . . . . . . . . . . . . . 129
Travel mode . . . . . . . . . . . . . . . . . . . . . . . . 54
T read Wear Indica to r (TWI) .. .. .. .. .. . 237
Trip computer Fue l consumption . . . . . . . . . . . . . . . . . . 25
M ileage . ... ... .. .. ...... .. .. .. .. .. 25
Sing le-tr ip memory .......... .... ... 25
Total-t rip memo ry . . . . . . . . . . . . . . . . . . 25
Trip odometer ............. .... .. .... 12
Trunk
refer to L u ggage compartment. . . 68, 127
T runk escape hand le . . . . . . . . . . . . . . . . . . 38
Trunk lid
refer to Rear lid .......... .. .. .. .. .. 37
Turn signa ls . ... .... .... ... .. .. .. .... 53
Warning/indicator lights ... .. .. .. .. .. 23
u
Undercoat ing . .... ..... ... .. .. .. ... 201
Unfasten ing safety belts .... .. .. .. .. . 138
Unid irect iona l tires ......... .. .. .. .. . 227
Uniform t ire q uality grading . .. .. .. .. . 24 1
Unlock ing
Rear lid ...... ................ .... . 37
Unlocking/ locking
at the lock cylinder ........ .. .. .. .. .. 36
by remote contro l . . . . . . . . . . . . . . . . . . 34
with the central locking switch .. .. .. .. 35
with the convenience key ........ .... . 35
Upper cabin heating . . . . . . . . . . . . . . . . . . 73
Use of jumper cab les ....... .. .. .. .. . 260
V
Valet park ing ............... ... ... ... 40
Vanity mirrors ............. .... .. .. .. 57
Ve hicle-c are prod ucts ....... .. .. .. .. . 194
Vehicle e lectrical system . . . . . . . . . . . . . . 17
Vehicle Identification Number (VIN) ... . 26 5
Vehicle jack .. .... ... ..... ..... .. ... 25 2
Vehicle key .. ............. .... .. .... 32
Inde x 285
Vehicle literatu re .... . .. .. ..... ... .. .. 5
Vehicle tool kit .. ... ................ 248
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . 70
w
Warning/indicator lights . . . . . . . . . . 10, 13
Airbag system . . . . . . . . . . . . . . . . . . . . . 20
Anti- lock braking system (ABS) ... .. .. . 19
Brake system .. .. ................. . 15
E lectromechanical parking brake . ..... 16
El ectronic power control . . . . . . . . . . . . . 20
El ectronic Stab ilization Contro l (E5C) .. . 19
Generator . . . . . . . . . . . . . . . . . . . . . . . . . 17
Malfunction Ind icator Lamp (M IL) .. .. . 21
Sa fety be lt . . . . . . . . . . . . . . . . . . . . . . . . 17
Safety systems . . . . . . . . . . . . . . . . . . . . . 20
Turn signals ....... . .. .. ..... ... .. . 23
Wa rranty coverages ............. .. .. 269
Washer reservo ir ...... ............. 226
Washing ... .. .... .. . .. .. ..... ... .. 194
Automatic car wash .. .. ..... ... .. .. 195
by hand ... .. .. .... . ... ...... ... .. 195
General information ........... .... 194
Matte finish paint ................. 197
Power top clean ing . ... ..... ... .. .. 197
with a power washer ............... 196
Waxing . ... .. .... ... .. .. ..... ... .. 198
Wea r indica to r .. .. ............... .. 237
Weights .. .. .. .. .. .. ............... 26S
Wha t happens if yo u wear your safety belt
too loose? . ....... .. . .. .. ..... ... .. 137
What happe ns to unbe lted occupants? .. 133
What impairs driving safety? ...... .. .. 122
Wha t shou ld I do after changing a
whee l? ... .. .. .... .. . .. .. ..... ... .. 234
What shou ld I do after replac ing whee ls? 234
Wheel bolts Torque ...... .. ...... ............. 244
Whee ls . ... .. .... .. . .. .. ..... ... .. 2 27
Cast alloy ....... ... .. .. ..... ... .. 200
Checking tire pressure ... .... ... .. .. 233
Co ld tire inflation pressure ...... .. .. 231
General notes .. .. ................. 227
G lossary of tire and loading term inolo-
gy .......... ... .. ............... 228
•
•