2012 TOYOTA IQ child restraint

148
1-7. Safety information
iQ_WE_74014E
Installing child restraints
Follow the child restraint system manufacturer’s instructions. Firmly
secure child restraints to the seats using a seat belt or ISOFIX rigid
anchors. Attach the top strap when installing a child restraint.
An ELR belt requires a locking
clip to install a child restraint
system.
Vehicles with rear seat: ISOFIX
rigid anchors (ISOFIX child
restraint system)
These exclusive fixing bars are
provided for the rear seats.
(Tags displaying the location of
the ISOFIX rigid anchors are
attached to the seats.)

149 1-7. Safety information
1
Before driving
iQ_WE_74014E
Installing child restraints using a seat belt
Rear facing — Baby seat/child seat (Before installing on the
front seat)
When it is unavoidable to install the child restraint system on the
front passenger seat, install the child restraint system on the front
passenger seat.
Adjust the seatback to the
most upright position.
Always move the seat as far
back as possible.
Vehicles with rear seat:
Anchor brackets (for top strap)
Anchor brackets are provided
for the rear seats.

151 1-7. Safety information
1
Before driving
iQ_WE_74014EInstall a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.
If your child restraint system does
not provide a locking clip, you can
purchase one at any authorized
Toyota dealer or repairer, or
another duly qualified and
equipped professional.
Locking clip for child restraint sys-
tem (Part No. 73119-22010)
Forward facing — Child seat (Before installing on the front
seat)
When it is unavoidable to install the child restraint system on the
front passenger seat, install the child restraint system on the front
passenger seat.
Adjust the seatback to the
most upright position.
Always move the seat as far
back as possible.

152 1-7. Safety information
iQ_WE_74014EForward facing Child seat
Place the child seat on the seat
facing the front of the vehicle.
Run the seat belt through the
child seat and insert the plate
into the buckle. Make sure that
the belt is not twisted.
Install a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.
If your child restraint system does
not provide a locking clip, you can
purchase one at any authorized
Toyota dealer or repairer, or
another duly qualified and
equipped professional.
Locking clip for child restraint sys-
tem (Part No. 73119-22010)

153 1-7. Safety information
1
Before driving
iQ_WE_74014EJunior seat (Before installing on the front seat)
When it is unavoidable to install the child restraint system on the
front passenger seat, install the child restraint system on the front
passenger seat.
Adjust the seatback to the
most upright position.
Always move the seat as far
back as possible.
Junior seat
Place the junior seat on the seat
facing the front of the vehicle.
Sit the child in the junior seat. Fit
the seat belt to the junior seat
according to the manufacturer’s
instructions and insert the plate
into the buckle. Make sure that
the belt is not twisted.
Check that the shoulder belt is
correctly positioned over the
child’s shoulder, and that the lap
belt is as low as possible.
(P. 86)

154 1-7. Safety information
iQ_WE_74014E
Removing a child restraint installed with a seat belt
Press the release button and
fully retract the seat belt.
Installation with ISOFIX rigid anchor (ISOFIX child restraint
system) (vehicles with rear seat)
Check the positions of the exclu-
sive fixing bars, and install the
child restraint system to the seat.
The bars are installed in the
clearance between the seat cush-
ion and seatback.
If the child restraint has a top
strap, the top strap should be
latched onto the anchor bracket.

155 1-7. Safety information
1
Before driving
iQ_WE_74014E
Child restraint systems with a top strap (vehicles with rear seat)
Secure the child restraint using a seat belt or ISOFIX rigid
anchors.
Remove the anchor bracket
cover.
Store the removed cover in a safe
place.
Latch the hook onto the anchor bracket and tighten the top
strap.
Make sure the top strap is securely latched. Make sure head
restraint is mounted.
Type A
Type B

156 1-7. Safety information
iQ_WE_74014E
When installing a child restraint system
You need a locking clip to install the child restraint system. Follow the
instructions provided by the manufacturer of the system. If your child
restraint system does not provide a locking clip, you can purchase the fol-
lowing item from any authorized Toyota dealer or repairer, or another duly
qualified and equipped professional.
Locking clip for child restraint system
(Part No. 73119-22010)
CAUTION
When installing a child restraint system
Follow the directions given in the child restraint system installation manual
and fix the child restraint system securely in place.
If the child restraint system is not correctly fixed in place, the child or other
passengers may be seriously injured or even killed in the event of sudden
braking, sudden swerving or an accident.
If the driver’s seat interferes with the
child restraint system and prevents it
from being attached correctly, attach
the child restraint system to the right-
hand rear seat (left-hand drive vehicles)
or the left-hand rear seat (right-hand
drive vehicles).
Adjust the front passenger seat so that
it does not interfere with the child
restraint system.
When installing a forward facing or
junior child seat on the front passenger
seat, move the seat as far back as pos-
sible.
Failing to do so may result in death or
serious injury if the airbags deploy
(inflate).