Page 207 of 442
3-58 Features and controls
3
NOTEMirror image is displayed on the screen.
Monitor brightness is adjusted automatically by sensors.
It is possible to change the display language of the screen.
For details, please refer to the separate owner’s manual for
“Mitsubishi Multi-Communication System”.
Under certain circumstances, it may become difficult to
see an image on the screen, even when the system is func-
tioning correctly.
• In a dark area, such as at night.
• When water drops or condensation are on the lens.
• When sunlight or headlights shine directly into the lens.
Instrument cluster
N00519000375
1- Energy level gauge
2- Energy usage indicator
3- Odometer/Trip odometer/Dash lights brightness indica-
tor/Service reminder/Cruising range indicator/Outside
temperature display
4- Speedometer
5- Reset button/Dash lights illumination button/Selector
button
BK0140800US.book 58 ページ ２０１１年９月２９日 木曜日 午後３時２８分
Page 210 of 442
Features and controls
3-61
3
Odometer/Trip odometer/Dash lights brightness
indicator/Service reminder/Cruising range indi-
cator/Outside temperature display
N00519500439
With the electric motor switch in the “ON” position, odometer,
trip odometer, dash lights brightness indicator, service
reminder, cruising range indicator, and outside temperature are
displayed.To change the display
N00572200015
The display is changed every time the reset button (A) is
briefly pressed.
BK0140800US.book 61 ページ ２０１１年９月２９日 木曜日 午後３時２８分
Page 211 of 442
3-62 Features and controls
3
NOTEThe cruising range indicator and outside temperature dis-
play are indicated when the electric motor switch is in the
“ON” position.
If there is no operation for about 10 seconds when the
meter illumination control or service reminder is shown,
the display returns to the odometer.Odometer
N00572300016
The odometer indicates the total distance the vehicle has trav-
eled.NOTEEven if the electric motor switch is turned to “ACC” or
“LOCK”, the odometer will be displayed for about 30 sec-
onds after the reset button is pressed.
1- Odometer
2-
Trip odometer
3-
Trip odometer
4- Dash lights brightness indicator
5- Service reminder (Drive distance remaining until next
inspection)
6- Service reminder (Number of months remaining until next
inspection)
7- Cruising range indicator
8- Outside temperature display
BK0140800US.book 62 ページ ２０１１年９月２９日 木曜日 午後３時２８分
Page 212 of 442
Features and controls
3-63
3
Trip odometer
N00572400020
The trip odometer shows the distance traveled since the last
time it was reset.
There are two trip odometer displays: and .
Trip odometer can be used to measure the distance traveled
since the current trip began.
At the same time, Trip odometer can be used to measure
the distance from a second location.NOTEEven if the electric motor switch is turned to “ACC” or
“LOCK” position, the trip odometer will be displayed for
about 30 seconds after the reset button is pressed.
To reset the trip odometer
To zero the counter, press and hold the reset button for more
than 1 second. Only the currently displayed value will be reset.
If trip odometer is displayed, for example, only trip odom-
eter will be reset. NOTEBoth trip odometer and trip odometer can measure
trips up to 9999.9 miles/kilometers.
If the 12V starter battery is disconnected for a long time,
both of these displays will be reset to “0”.
Service reminder
N00572500021
The service reminder shows the driving distance or number of
months remaining until the next recommended periodic main-
tenance inspection is required.
When the next inspection is nearly due, the display shows “----
--”.NOTEThe service reminder time can be modified by a certified
i-MiEV dealer, to adjust for severe usage, etc. Refer to
“Severe maintenance schedule” in your vehicle’s War-
ranty and Maintenance Manual. For further information,
please contact a certified i-MiEV dealer.
Even if the electric motor switch is turned to “ACC” or
“LOCK” position, the service reminder will be displayed
for about 30 seconds after reset button is pressed.
BK0140800US.book 63 ページ ２０１１年９月２９日 木曜日 午後３時２８分
Page 214 of 442
Features and controls
3-65
3
Resetting the service reminder
With the electric motor switch in the “LOCK” position or the
“ACC” position, it is possible to reset the spanner mark (A)
and “------” indication (B).
When they have been reset, the driving distance or number of
months remaining until the next periodic inspection are shown
and the spanner mark (A) is no longer shown every time the
electric motor switch is turned from the “LOCK” position or
the “ACC” position to the “ON” position.1. Push the reset button (D) to view the driving distance or
number of months remaining until the next periodic
inspection.
2. Give the reset button (D) a long push (at least 2 seconds)
to make the spanner mark (A) start flashing. (If you do not
touch the reset button for about 10 seconds while the
spanner mark is flashing, the display will revert to its orig-
inal indication.)
3. Give the reset button (D) a gentle push while the spanner
mark is flashing. The “------” indication (B) will change to
“cLEAr” (C).
4. The driving distance or number of months remaining until
the next periodic inspection will be shown.
NOTEIt is not possible to reset the “------” indication (B) with
the electric motor switch in the “ON” position.
When a certain distance has been driven and a certain
period has elapsed after appearance of the “------” indica-
tion (B), the indication is automatically reset and the num-
ber of months until the next periodic inspection is shown.
If you accidentally reset the display, consult a certified
i-MiEV dealer for assistance.
CAUTION
!The customer is responsible for making sure that
regular inspections and maintenance are performed.
Inspections and maintenance must be performed to
prevent accidents and malfunctions.
BK0140800US.book 65 ページ ２０１１年９月２９日 木曜日 午後３時２８分
