2012 AUDI A8 Owners Manual

Memory buttons
Applies to vehicles: with memory function
Fig . 59 D river's door: memory function buttons
Fig. 60 Rear door: memory fun ction buttons
The memo ry buttons are located in the dr iv­
er 's/fr ont passenger's door and in the rear
doors* .
Storing seating profiles
.. To s tore a seating profi le , press the ISETI
button and then one of the memo ry but­
tons .
.. To recall a seati ng prof ile, press and hold
the memory button until the seat is adj ust­
ed to t he sto red settings.
.. To sw itch the memo ry function fo r the driv­
er o r front passenger off, p ress th e
IOFFI
button. The word OFF ligh ts up when the
memo ry fu nctio n i s s witche d off . S eating
p ro files will not be s tore d.
Adjusting the reclining position/standard
position
.. To adju st the re cl ini ng pos it ion , press and
hol d the @ button until the seat move s into
the end position .
.. To ad just t he standard pos ition, press and
ho ld the @ button until the sea t moves into
the e nd position.
Seats and storage 63
A WARNING
- For safety reasons, the seat setting
should o nly b e recalled w hen the veh icle
is st ationary -oth erw ise you risk hav ing
a n ac cid ent.
- If necessa ry, you stop the process by
press ing the
!OF F! button or any of the
m emory buttons.
Adjusting the front passenger seat in
the MMI
Applies to vehicles: with memory function
The driver can adjust the posi tion of the front
passenger seat.
Adjusting the front passenger seat from
the driver's side
.. Select: !CAR I func tion b utton> Car systems
con trol bu tton > Vehicle settings > Seat s >
Front passenger seat > Adjust seat posi ­
tion .
.. Yo u can now adj ust the f ront passenger seat
using the buttons on the driver's seat
<=> page 55, fig. 50.
Matching the position of the driver's seat
.. To adju st the fron t passenger se at to match
t he driver's seat settings, se lec t th e
ICARI
function button > Car systems cont ro l but­
ton
> Vehicle settings > Seats > Front pas­
senger seat > Symmetry to driver seat .
.. Press and hold the control knob unt il the
adjustment process is comp lete .
@ Tips
When matching seat settings, the settings
fo r the lumbar support and seating sur­
face will no t tra nsfer to the front passeng­
e r's seat.

64 Seats and storage
Full-length center
console
Overview
Appl ies to vehicles: with full-len gth ce nter console
Fig. 61 Rear: full -length center console
@ · 115 volt socket ¢ page 64
@ · cupholder <=> page 71
© · 12 volt socket c:> page 70
@ · Folding table ¢ page 65
®·center armrest and storage com part ·
ments: to open the deep compartment, press
the right button and fold the center armrest
upward. To open the compartment for the
massage function remote control*
c:> page 60
and for the telephone*, press the left button
and fold the center armrest upward.
115-volt socket
Applies to vehicles: with 115 -vo lt socket
The 115-volt socket can only be used when
the engine is running¢
A. When you push
the connector all the way into the socket, the
child safety mechanism releases and current
flows through the socket .
Equipment that can be connected
Electrical devices can be connected to the 115
volt socket in the vehicle. Power consumption
at the 115-volt socket must not exceed 150
watts (300 watts peak) . Check the power con·
sumption of the equipment on the model
plate .
LED on the socket
-The socket is ready for use when the LED is
green.
- If the LED blinks red, there is a malfunction.
The socket will switch off automatically due
to overcurrent or overheating. The socket
will switch on again automatically after a cool-down period. Any devices that are con­
nected and switched on will activate again
automatically
c:> A .
A WARNING
-
- The sockets and the electrical accessories
connected to them operate only when
the ignition is switched on. Incorrect us­
age can lead to serious injuries or burns.
To reduce the risk of injuries, never leave
children unattended in the vehicle with
the vehicle key.
- Heavy equipment or plugs with integrat­
ed power supply units can damage the
socket and lead to injuries.
- Store a ll connected equipment securely
while the vehicle is moving so that they
cannot be thrown through the vehicle in
the event of a braking maneuver or an
accident.
- Never spill any liquids on the socket. If
any moisture gets into the socket, make
certain that all the moisture has dried up before using the socket again.
- Equipment that is connected to the vehi·
cle socket can heat up more than it does
when connected to the public grid .
- When using adapters and extension
cords, the child safety for the 115-volt
socket is disabled and the socket is live.
- Never insert anything other than the
plug of an appropriate electrical accesso·
ry into the socket, especially things that
conduct electricity, e.g. metal pens, knit­
ting needles, etc. into the contacts of the
115-volt socket.
- Turn the electrical equipment off if the
socket has switched off because of over·
heating.

(D Note
-Always follow the manufacturer's in­
structions for all electrical accessories
you want to use with the electrical sock­
et!
- Do not connect lamps that contain a ne­
on tube. For technical reasons the lamp
may be damaged.
- Do not connect any 230-volt equipment
to the 115-volt socket. The equipment
may be damaged. If necessary, check the
permissible voltage for the equipment
on the mode l label.
- In the case of some power packs, e.g . for
a laptop computer, the bu ilt-in overcur­
rent shutoff prevents it from be ing
swi tch ed on because of excessive start­
up current. In this case, disco nnect the
power pack from the consumer and re­
connect it after about 10 seconds.
(I) Tips
- Unshielded equipment may cause inter­
ference in the radio and the vehicle elec­
tronics.
- Some eq uipment may work properly be­
cause of the reduced power (wattage),
available from the socket.
Folding table in the center console
Applies to vehicles: with fold ing table in the center con·
so le
The folding table is stored in the front area of
the center console .
Fig . 62 Rear center console: opening th e fo ld in g table
Seats and storage 65
Fig. 63 Rear center console: fold ing table inclined po ·
s itio n
Opening
.,. Pull the handle @back q fig. 62. The fold ­
ing table extends out partially by itself
~.&. -
.. Pull the folding table up until it locks into
place @.
.. Fold the tabletop back and down©-
Storing
.. Release the tabletop @to fold it back.
.. You can now move the folding table verti·
cally back into its original posit ion .
A WARNING
-Do not open the folding tab le while driv­
ing. Opening the folding table while driv­
ing increases the risk of injury in the
event of a coll is ion or sudden braking .
- To reduce the risk of pinching, open and
close the folding table carefully and in a
contro lled manner .

66 Seats and storage
Luggage compartment
Tie-downs and luggage compartment
net
The luggage compartment net prevents small
objects from sliding.
Fig. 64 Locat ion of the faste ning eyes in the luggag e
compartment
Fig. 65 Luggage compartment net unhooked
" To secure objects with the luggage com­
partment net*, fold the t ie-down bracket
upward
9 fig . 64 .
" Insert the hooks on the luggage compart­
ment net* into the tie-downs
9 fig. 65.
" Read and heed all WARNINGS 9page 130,
Stowing luggage.
In a collis ion, the laws of phys ics mean that
even smaller items that are loose in the vehi­
cle will turn into heavy missiles that can cause
serio us injury . Items in the vehicle pick up ki­
netic energy which varies w ith the vehicle and
the weight of the item. Vehicle speed is the
most signif icant factor.
F or example, in a frontal collis ion at a speed
of 30 mph (48 km/h), the forces acting on a
10 -lb (4.5 kg) object are about
20 times the
normal weight of the item . This means that
the we ight of the item would suddenly be the equivalent of about
200 lbs (90 kg). One can
easily imagine the injuries that an item of that
weight flying freely through the passenger compartment can cause in a collision at a
speed considered relatively low.
A WARNING
-Weak, damaged or improper straps used
to secure items to tie-downs can fail dur­
in g hard braking or in a collision and cause
serious personal injury.
- Always use su itable retaining straps and
p roperly secu re items to the tie-downs in
the lu ggage compartment to help pre­
vent it ems from shifting or flying for­
ward.
- Never attach a child seat tether strap to
a tie-down.
- Fo r strength-related reasons, the mount­
ing hooks can only be used to secure ob­
jects weighing up to 10 lb. (5 kg) . Heavi­
er objects will not be adequately secured
- there is a risk of injury.

Pass-through with ski
sack
Preparing the pass-through
Applies to vehicles: with pass-through and ski sack
Long objects such as skis can be transported
in the ski sack.
Fig. 66 Rear bench seat: removing the protect ive cover
Fig. 67 Rear center armrest: attaching the protective
cover
~ Fold the rear center armrest and the cover
located behind it down.
~ Press the button to remove the p rotective
cover ¢
fig. 66.
~ To protect the front area of the center arm­
rest, position the cover as illustrated
¢
fig. 67 and press the suction cups down so
they adhere.
~ Remove the ski sack and unfold it.
Seats and storage 67
Loading and securing the ski sack
Applies to vehicles: with pass -through and ski sack
--~ --
·-- --· ----~-
Fig. 68 Luggage compartment: pass-through in th e
backrest
Fig. 69 Rear bench seat: sec uring the sk i sack
Loading
~ Fold the pass-through cover in the luggage
compartment down
<=:> fig. 68.
~ Slide the pointed end of the skis into the sk i
sack first
c:> ,&. . Th e front pa rt of the bind­
ings must be directly under the securing
strap on the ski sack@<=:>
fig. 69.
Securing
~ Insert the securing strap @ on the ski sack
into the center safety belt latch ©
c:> fig. 69.
~ Tighten the secur ing strap @.
Securing (vehicles with full-length center
console)
In the pass-through, two securing straps are
in the hooks located in the luggage compart­
ment .
~ Hook the hooks into the front tie-downs in
the luggage compartment.
~ Tighten the securing strap@in the rear .

68 Seats and storage
& WARNING
- The ski sack is intended only for the
transportation of skis and other light ob ­
jects . To reduce the risk of serious per­
sonal in jury, never t ransport heavy or
poin ted objects in the ski sa ck.
- When brak ing rapidly or during an acci­
dent, the load could be displaced and
cause injury to occupants.
- Sharp edges on the load must be cove red
for protect ion. Always fasten the belt
ti gh tly around the sack and its contents
¢ fig. 69.
-For safety reasons, do not t ransport
more than two pairs of skis in the ski
sac k.
- You m ust sec ure the ski sack with t he
strap after loading.
- Make sure a ll objects that you are trans­
porting in the pass-through are secured.
Otherwise they cou ld slide around during
sudden braking maneuvers and cause in ­
jury.
@ Tips
- Never stow the sk i sack away whe n it is
still wet or damp (for examp le, snow
melt ing from sk is) . Allow it to dry com­
plete ly before stowing it away .
- Position skis in the ski sack with the pointed ends facing t he front and ski
po les w ith the pointed ends facing the
rear.
Roof rack
Description and mounting locations
Additional cargo can be carried wi th a roof
luggage rack .
Fig . 70 Roo f ra ck attac hment po ints
.,. Always read and follow the instructions pro ­
vided by the roof rack man ufactu rer when
the roof rack system mus t be install ed .
If luggage or cargo is to be ca rried on the
roof, yo u mus t observe the follow ing:
- To enhance the vehicle 's streamlined design,
ra in gutters have been mo lded i nto t he roof .
I t is not poss ible to use normal roof ra cks.
O nl y install a roof ra ck specific ally designed
for your model AB . Contact the nea re st Audi
dea ler for information on approved modular
roof racks for your v ehicle.
- On ly use roof racks approved for your vehi­
cl e. These approved roof racks are the basis
fo r a complete roof rack system. Addition al
a tta chmen ts or carr ier systems are needed
t o transpor t luggage and spor ts equipment.
We recommend using roof rack s from the
Aud i original accessories program.
- When insta lling the roof rack, make sure it
is o nly mounted on the designated locations
on the roof~
fig. 70.
- We recommend that you keep the i nstalla ­
tion instruct ions for your roof rack system
together w ith your Owner's literature in the
ve hicle.
When should the roof rack be removed?
- Before go ing through an automatic car wash
(it is best to ask the ca r wash operator for
adv ice)
...

-When not in use, to reduce fuel consump­
tion, wind noise and to guard against theft.
A WARNING
- Use of an unapproved roof rack or incor­
rect mounting of an approved roof rack
can cause the roof rack or the items at­
tached to it to fall off the roof onto the
road .
- Objects falling from the roof of a veh icle
can cause a crash and personal injury .
- Only mount the roof rack on the desig­
nated locations on the roof
c::> fig . 70 .
-The roof rack system must be installed
exactly according to the instructions pro­
vided.
- When driving w ith a roof rack system,
changes to the center of gravity and wind
resistance can change the veh icle han­
dling and lead to a collision . Always
adapt your driv ing and your speed to the
current conditions.
0 Not e
-Your vehicle warranty does not cover any
damages to the vehicle caused by using
r oof racks or mount ing structures not
approved by Audi for your vehicle. The
same applies to damage resulting from
incorrect roof rack installation.
- Always check the roof rack mountings
and hardware before each trip and dur­
ing a trip to make sure everything is se­
cure ly tightened . If necessary, retighten
the mount ings and check the ent ire sys­
tem from t ime to t ime.
- After mounting a roof rack system, or
when you transport objects on the roof
of your veh icle, the height of the vehicle
i s naturally increased. Be careful when
driv ing under low br idges or in parking
garages for example. This could cause
damage to the load and even the vehicle
i tself.
- Make sure the open rear lid and the sun­
roof* do not come into contac t with the
roof rack .
Seat s an d sto rage 69
Loading the roof rack
Always distribute loads evenly. Make sure
anything on the roof rack is securely tied
down .
.. Always distribute the loads on the roof rack
even ly .
.. Always attach items to the roof rack secure-
ly before you d rive off .
The maximum permissible roof weight is
2 20
lb (100 kg ).
The roof weight is the total of
the weight of the roof rack, the attachments
and the cargo you a re carrying. You must also
not exceed the maximum load we ight for the
roof rack you are using .
When using a roof rack system which has a l ower load ca rrying capaci ty , you must not use
up the tota l maxim um permissible load car ry ­
i ng capacity specified above . Instead, you
sho uld load the roof rack system only to the
maximum capacity specified by the manufac ­
turer of the roof rack system.
A WARNING
---Weak, damaged or improper straps used
to secure items to the roof rack can fail
during hard braking or in a collis ion and
cause ser ious personal injury.
- Make sure the roof rack is installed exact­
ly as specified above
c::> page 68.
-Always use su itable mount ing straps for
securing items to the roof rack to help
p revent items from sh ifting or flying for­
ward.
- Items on the roof rack must always be
securely mounted.
- The use of a roof rack can negat ively af­
fect the way a veh icle hand les . Cargo
that is large, heavy, bulky, long or flat
will have a greater negat ive influence on
the vehicle's aerodynamics, center of gravity and overall handling . Always
drive s lowly, avoid sudden braking and
maneuvers when transporting cargo on
the roof of your vehicle .

70 Seats and storage
-Never exceed the maximum permissible
load carrying capacity of the roof of your
vehicle, the permissible axle weights and
the permissible total weight of your vehi­ cle
c::, page 276, Weights .
@ For the sake of the environment
As a result of the increased wind resist­
ance created by a roof rack, your vehicle is
using fuel unnecessarily. So remove the
roof rack after using it.
12-volt sockets
Applies to vehicles: 12-volt soc kets
Electrical accessories can be connected to ev­
ery 12-volt socket.
Fig. 71 Sect io n of the trim panel of th e lu ggage com­
part ment: 12 -vol t soc ket
Fig. 72 Rear center conso le: 12-vo lt soc ket
... Open the socket cover c::, fig. 71 or c::, fig. 72 .
... Insert the plug of the electrical device into
the socket.
There is an additional 12 volt socket in the
front center console~
page 71, fig. 73.
The 12 volt sockets may be used for 12-volt
appliances with maximum consumption of up
to 100 watts . Before you purchase any accessories, always
read and follow
the information in
c::, page 282, Additional accessories and parts
replacemen t.
A WARNING
The sockets and the electrical accessories
connected to them operate only when the ignition is switched on . Incorrect usage
can lead to serious injuries or burns. To re­
duce the risk of injuries , never leave chil­
dren unattended in the vehicle with the ve­
hicle key.
(D Note
To avoid damaging the socket, only use plugs that fit properly.
- Never connect equipment that generates
electrical current, such as a solar panel
or battery charger, to the 12 volt socket .
This could damage the vehicle 's electri­
cal system.
- The 12 volt socket should only be used
for a short period of ti me as a power
source for electrical equipment. Please
use the electrical sockets in the vehicle
when connecting equipment for longer periods.
@ Tips
When the engine is off and accessories are
still plugged in and are on, the vehicle bat­
tery can still be drained.