2011 Peugeot RCZ Owner's Manual

3/
EASE OF USE AND COMFORT








FRONT SEATS

Seat with integral head restraint, consisting of a seat cushion and a seat
back which can be adjusted to adapt your position for ease of driving
and comfort.

MANUAL ADJUSTMENTS


Forwards-backwards adjustment
Driver's or passenger's seat height adjustment

Seat back angle adjustment



)
Raise the control bar and slide the seat forwards or backwards.


)
Pull the control lever upwards to raise or push it downwards to
lower, as many times as necessary, to obtain the position required.



)
Turn the knob to set the angle required.

64











FRONT SEATS

Seat with integral head restraint, consisting of a seat cushion and a seat
back which can be adjusted to adapt your position for ease of driving
and comfort.


ELECTRIC ADJUSTMENTS


Forwards-backwards adjustment
Seat cushion height adjustment



)
Push the control forwards or rearwards to slide the seat.


)
Tilt the rear part of the control upwards or downwards to obtain the
required height.

The electrical functions of the seat are deactivated approximately
one minute after the ignition is switched off.
To reactivate them, switch on the ignition.



Seat back angle adjustment



)
Tilt the control forwards or rearwards to adjust the angle of the seat
back.

3/
EASE OF USE AND COMFORT


Lumbar adjustment



)
Turn the dial to obtain the correct lumbar position.













Heated seats control

With the engine running, the front seats can be heated separately.


)
Use the adjustment dial, placed on the side of each front seat, to
switch on and select the level of heating required:

0
:
Off.

1
:
Low.

2
:
Medium.

3
:
High.

1
2
M66











STORING DRIVING POSITIONS

System which takes into account the electrical settings of the driver's
seat and the door mirrors. It enables you to store two positions using
the buttons on the side of the driver's seat.

STORING A POSITION


Using buttons M/1/2



)
Switch on the ignition.

)
Adjust your seat and your door mirrors.

)
Press button M
, then press button 1
or 2
within four seconds.
An audible signal is heard indicating that the settings have been
stored.


RECALLING A STORED POSITION

Storing a new position cancels the previous position.



Using button 1 or 2



)
Press and hold button 1
or 2
until the audible signal is heard
indicating the end of the adjustment.
When the ignition is off, after a few consecutive position recalls,
the function will be deactivated until the engine is started, to
prevent discharging of the battery.

3/
5
090
1
3001/2
1
CHE
CK/
0
0
0
EASE OF USE AND COMFORT








STEERING WHEEL ADJUSTMENT




)
When stationary
, pull the control lever to release the adjustment
mechanism.

)
Adjust the height and reach to suit your driving position.

)
Push the control lever to lock the adjustment mechanism.
As a safety precaution, these operations should only be carried
out while the vehicle is stationary.

68





MIRRORS


DOOR MIRRORS

Each fi tted with an adjustable mirror glass permitting the lateral
rearward vision necessary for overtaking or parking. They can be folded
electrically.

Demisting - defrosting

The demisting-defrosting of the door mirrors is effected with
the engine running, by switching on the heated rear screen
(refer to the "Demisting-defrosting the rear screen" section).


Adjustment



)
Move control A
to the right or to the left to select the corresponding
mirror.

)
Move control B
in all four directions to adjust.

)
Return control A
to the central position.
The objects observed are, in reality, closer than they appear.
Take this into account in order to correctly judge the distance of
vehicles approaching from behind.

3/
EASE OF USE AND COMFORT


Folding



)
From outside: lock the vehicle using the remote control or the key.

)
From inside: with the ignition on, pull the control A
in the central
position rearwards.
If the mirrors are folded using control A
, they will not unfold when
the vehicle is unlocked. Pull again on control A
.


Unfolding



)
From outside: unlock the vehicle using the remote control or the key.

)
From inside: with the ignition on, pull the control A
in the central
position rearwards.
The folding and unfolding of the door mirrors using the remote
control can be deactivated by a PEUGEOT dealer or a qualifi ed
workshop.
Never fold or unfold the electric folding mirrors manually.









Automatic tilting in reverse gear

System which provides a view of the ground during parking manoeuvres
in reverse gear.


Programming



)
With the engine running, engage reverse gear.

)
Select and adjust the left-hand and right-hand mirrors in
succession.
The adjustment is stored immediately.


Switching on



)
With the engine running, engage reverse gear.

)
Move control A
to the right or to the left to select the corresponding
mirror.
The glass of the mirror selected tilts downwards, in accordance with its
programming.


Switching off



)
Exit reverse gear and wait ten seconds.
or


)
Return control A
to the central position.
The mirror glass returns to its initial position.
The mirror glass also returns to its initial position:


- if the speed exceeds 6 mph (10 km/h),

- if the engine is switched off.

70





REAR VIEW MIRROR

Adjustable mirror providing a central rearward view.
Equipped with an anti-dazzle system, which darkens the mirror glass:
this reduces the nuisance to the driver caused by the headlamps from
following vehicles, low sun...


Manual day/night model

Adjustment



)
Adjust the mirror so that the glass is directed correctly in the "day"
position.



Day/night position



)
Pull the lever to change to the "night" anti-dazzle position.

)
Push the lever to change to the normal "day" position.


As a safety measure, the mirrors should be adjusted to reduce the
"blind spot".









Automatic day/night model


In order to ensure optimum visibility during your manoeuvres, the
mirror lightens automatically when reverse gear is engaged.
By means of a sensor, which measures the light from the rear of the
vehicle, this system automatically and progressively changes between
the day and night uses.
Due to the curve of the rear screen, the image in the rear view
mirror may be slightly distorted; take this into account when
manoeuvring the vehicle.