Black plate (22,1)
Model "R35-N" EDITED: 2009/ 10/ 30
LIST SCREENAfter searching for a point of interest, a list
screen is displayed.
Depending on the list displayed, it can be
sorted.Items displayed in list*1
Highlight the preferred item from the list andpush
facility name is not completely displayed
(due to length) , highlight the item to display
the hidden part of the name.
*2
Distance from the current location
*3
Direction to the point of interest
*4
If the entire list cannot be displayed on the screen, the system displays the total
number of items in the list and the entry
number of the selected item. Turn the
center dial or push the up or down buttons
of the main directional buttons to scroll the
list.
*5
An item that starts with the selected letter
will be displayed at the top of the list.
*6
Highlight and push
list in the original order.
*7
When the list is sorted by the shortest distance, the selected location can be
confirmed in the preview displayed on the
right side of the screen.
*8
Highlight and push
the search conditions.
1-14
About Multi function display system
Black plate (23,1)
Model "R35-N" EDITED: 2009/ 10/ 30
With this system, it is possible to use the center
dial and touch panel operation to perform the
same operations.
This manual describes the operations using the
center dial.
For the operations that differ from those of the
center dial and for useful methods for using the
touch panel operation, refer to each section.EXAMPLE OF TOUCH PANEL OP-
ERATIONExamples of operations performed using the
touch panel operation are described here.Selecting itemWhen the item is touched, the next screen is
displayed.
Adjusting volume and othersTouch [+] or [ ] located on the right and left of
the bar graph to perform the adjustment.Scrolling message or listTouch [
]or[
] to scroll the message or list.
Touch [
]or[
] to skip to the next page.
Inputting letters and numbers1. Touch the letter or number.
2. Touch [Delete] to delete a character. Push andhold[Delete]todeleteallofthe
characters.About Multi function display system
1-15
TOUCH PANEL OPERATION
Black plate (24,1)
Model "R35-N" EDITED: 2009/ 10/ 30
CHARACTER (letters and numbers)
INPUT SCREENAlphanumeric characters are entered to set a
destination, search for a facility, edit stored
locations, etc.1. Use the touch panel or center dial tohighlight a character on the displayed key-
board.2. Push
is entered.
3. Push <
>, or highlight [Delete] and push
entered.
Push and hold <
>to delete all the
characters entered.
Highlight [Space] and push
enter a space.
4. After finishing the entry, highlight [List] and push
INFO:
. Push <
>on the control panel to
return to the previous screen, but only
after deleting all the characters entered.
. Touch [] on the screen to return to
the previous screen even when char-
acters have been entered.
. The list screen appears automatically
when text has been entered and the
matching list items have been narrowed
down to a number that will fit on the
screen.
Symbol input screen
. Symbol keys are displayed by high-
lighting [Symbols] and pushing
highlighting [A-Z] and pushing
1-16
About Multi function display system
HOW TO INPUT LETTERS AND
NUMBERS
Black plate (25,1)
Model "R35-N" EDITED: 2009/ 10/ 30
NUMBER INPUT SCREENA phone number or a street number can also be
entered as a search method to look for a
destination. Perform the following procedure to
enter a number.
INFO:
Only the locations included in the map data
database can be searched for by a phone
number.
1. Use the touch panel or center dial to highlight a number on the displayed key-
board.
2. Push
entered.3. Push <
>, or highlight [Delete] and push
tered.
Push and hold <
>to delete all the
numbers entered.
4. After finishing the entry, highlight [List] and push
INFO:
. Push <
>on the control panel to return
to the previous screen, but only after
deleting all the numbers entered.
. Touch [] on the screen to return to the
previous screen even when numbers have
been entered.
About Multi function display system
1-17
Black plate (7,1)
2 Navigation
Model "R35-N" EDITED: 2009/ 10/ 30
Features of this navigation system.......................... 2-2
Route guidance ............................................. 2-2
Places of interest (PLACES) directory ................. 2-2
Address book ................................................ 2-2
Avoid area .................................................... 2-2
XM NavTraffic ®
information .............................. 2-2
Automatic reroute ........................................... 2-2
Detour ......................................................... 2-3
Birdview
TM.................................................... 2-3
Voice guidance .............................................. 2-3
Map settings ..................................................... 2-4
Map types .................................................... 2-4
BirdviewTM
(3D) map ...................................... 2-5
Building graphics ........................................... 2-5
Displaying current vehicle location ...................... 2-6
Moving map .................................................. 2-7
Changing scale of map .................................... 2-9
Changing map view ...................................... 2-11
Map view settings ........................................ 2-12
Looking at information on map ........................ 2-16
Map menu screen ........................................ 2-18
Map symbols. .............................................. 2-21
Setting destination ........................................... 2-23
Destination screen ........................................ 2-23
Finding address ........................................... 2-25
Finding place .............................................. 2-26 Setting home as destination
............................ 2-32
Searching from address book ......................... 2-33
Setting previous destination ............................ 2-34
Setting previous start point ............................. 2-35
Setting from stored routes .............................. 2-36
Setting by phone number ............................... 2-36
Setting freeway entrance/exit .......................... 2-38
Setting intersection ....................................... 2-39
Setting city center ........................................ 2-40
Setting point on map .................................... 2-42
Delete destination ........................................ 2-42
Route guidance ............................................... 2-43
Procedures after setting destination .................. 2-43
About route guidance .................................... 2-47
Route screen .............................................. 2-53
Route guidance settings ................................ 2-67
Storing a location/route ..................................... 2-71
Storing location ........................................... 2-71
Storing route ............................................... 2-74
Storing tracked route .................................... 2-75
Storing avoid area ........................................ 2-76
Editing address book .................................... 2-77
Deleting stored item ..................................... 2-88
Transferring information to/from address book . .... 2-91
Navigation setting ............................................. 2-93
Basic operation ........................................... 2-93
Black plate (28,1)
Model "R35-N" EDITED: 2009/ 10/ 30
ROUTE GUIDANCEThe main features of the NISSAN Navigation
System are visual guidance and voice guidance
in selected map coverage areas. Utilizing a
network of GPS (Global Positioning System)
satellites, the NISSAN Navigation System tracks
the location on the map and navigates to a
preferred location.
Once the destination is set in a map coverage
area, the NISSAN Navigation System will
calculate a route from the current location to
the destination. The real-time map display and
turn-by-turn voice guidance leads the driver
along the route. These features can be espe-
cially helpful when driving to unfamiliar locations.
The system may be unable to set a destination
and/or calculate a route when the destination is
outside the map coverage area. Additionally,
voice guidance may not be available if the
destination is outside the map coverage area.
For more information on how to set a destina-
tion, refer to section 4.PLACES OF INTEREST (PLACES)
DIRECTORYThe NISSAN Navigation System offers an
extensive places of interest (Places) directory
in map coverage areas. This directory includes a
wide variety of destinations ranging from gas
stations, ATMs, and restaurants to casinos, skiresorts, shopping centers and businesses. A
point of interest can be searched by category,
name or phone number. After selecting a
destination, the NISSAN Navigation System will
calculate a route to that destination.
The Places directory has many uses. For
example, the directory can be sorted by the
various types of restaurants near the current
location. If an ATM or gas station is needed, the
NISSAN Navigation System can navigate to the
closest preferred location.
For more information on how to use the Places
directory, refer to section 4.
ADDRESS BOOKThe Address Book can store up to 300 locations
from map coverage areas into a personal
directory. This is especially useful for frequently
visited locations, such as clients, relatives and
friends. The Address Book function allows easy
access to frequently visited locations when
setting them as your destination.
For more information on how to use the Address
Book, refer to section 6.AVOID AREAThe Avoid Area function sets areas or freeways
that the NISSAN Navigation System does not
include in the suggested route when calculating
routes. For example, if a freeway or area that isalways congested with traffic.
For more information on the Avoid Area function,
refer to section 6.
XM NavTraffic
®INFORMATION
When available, the XM NavTraffic
®Information
broadcast may help to avoid delays due to traffic
incidents. Traffic jams, roadwork, closed roads
around the current location, etc. are represented
graphically on the map by icons depicting the
nature of the event. Incidents on the route are
automatically brought to the attention when they
are approached.
The XM NavTraffic
®Information feature, via the
guidance mode, may help to detour around
traffic problems. For more information on the XM
NavTraffic
®Information feature, refer to section
5.
AUTOMATIC REROUTEWhen detecting a deviation from the suggested
route, the NISSAN Navigation System will
automatically recalculate a new route to the
destination.
For more information on the Automatic reroute
function, refer to section 5.
2-2
Navigation
FEATURES OF THIS NAVIGATION
SYSTEM
Black plate (29,1)
Model "R35-N" EDITED: 2009/ 10/ 30
DETOURTo make a detour due to traffic conditions, the
Detour function calculates an alternative route.
The NISSAN Navigation System can calculate a
route using secondary roads that will return to
primary roads after a specified number of miles.
For more information on the Detour function,
refer to section 5.
Birdview
TM
Two map types, the 2D (Plan View) map and
Birdview
TM
(3D)map,areavailableinthe
NISSAN Navigation System. Birdview
TM
map
displays the map from an elevated perspective.
In Birdview
TM
map, it is easy to recognize an
image of the route because it provides a
panoramic view over a long distance.
For more information on Birdview
TM
map, refer
to section 3.
VOICE GUIDANCERoute guidance is provided through voice and
visual instructions. Voice guidance announces
the appropriate directions when approaching an
intersection to turn.
For more information on voice guidance, refer to
section 5.
Navigation
2-3
Black plate (30,1)
Model "R35-N" EDITED: 2009/ 10/ 30
MAP TYPESTwo types of map views are available: 2D map
and Birdview
TM
(3D) map.
2D mapThe 2D map displays the map in a 2-dimensional
environment similar to a road map.
Screen information:*1
Vehicle icon:
Indicates the current vehicle location and the direction of travel.
*2
Guide point:
Indicates a guide point on the route.
*3
Remaining time and distance to the
destination:
Indicates the approximate remaining time and distance to the destination or waypoint.
This indicator will appear when a destina-
tion or waypoint is set and route guidance is started.
When the vehicle is not driven on the
suggested route, the screen displays the
direction to the destination and the dis-
tance to the destination from the current
vehicle position.
“Switching estimated arrival time dis-
play” page 2-69
*4
Suggested route:
Appears in bold yellow during route gui- dance.
*5
/
Direction indicator:
Indicates the directional setting of the map.
2-4
Navigation
MAP SETTINGS