2011 NISSAN GT-R interior lights

Black plate (175,1)
Model "R35-N" EDITED: 2009/ 10/ 30
FAN SPEED CONTROLTurn the fan speed control dial<
>to
manually control the fan speed.
Push to return to automatic
control of the fan speed.
AIR RECIRCULATIONPush the intake air control button <
>to
recirculate interior air inside the vehicle. The
indicator light “
” will come on.
The air recirculation mode cannot be activated
when the air conditioner is in the front defrosting
mode “
”.
OUTSIDE AIR CIRCULATIONPush the outside air circulation button <
>
to change the air circulation from the intake air to
the outside air. The indicator light “
” will
come on.
AUTOMATIC AIR INTAKE CONTROLIn the AUTO mode, the intake air will be
controlled automatically. To manually control
the intake air, push the intake air control button
<
> . To return to the automatic control
mode, push the intake air control button
<> for about 2 seconds. The indicator
lights will flash twice, and then the intake air will
be controlled automatically.
Heater and air conditioner
5-5
MANUAL OPERATION

Black plate (212,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Available setting items
.[On-screen Clock]:
Select to toggle the clock display located in
the top right corner of the display between
on and off. The indicator light illuminates
when the clock display is set to on.
. [Clock Format (24h)]:
Select the clock format between 12-hour
and 24-hour times. The indicator light
illuminates when the clock is set to the 24-
hour format.
. [Offset (hour)]:
Use the center dial to adjust the offset value
(between 12 and +12) .
. [Offset (min)]:
Use the center dial to adjust the offset value
(between 59 and +59) .
. [Daylight Savings Time]:
Select to toggle the daylight savings time
setting between on and off. The indicator
light illuminates when the daylight savings
time setting is set to on. .
[Time Zone]:
Select an appropriate time zone from the list
that appears when this item is highlighted.
— Pacific
— Mountain
— Central
— Eastern
— Atlantic
— Newfoundland
— Hawaii
— Alaska
This key does not appear on the display until the
ignition switch is pushed to the ON position.
1. Push .
2. Highlight [Comfort] and push .
3. Highlight the preferred setting item and push . The indicator light of the
selected item illuminates.
4. After setting, push or<
>to
apply the setting.
5. Push <
>to return to the previous
screen. Push