2011 NISSAN GT-R display

Black plate (47,1)
Model "R35-N" EDITED: 2009/ 10/ 30
MAP SYMBOLSThis navigation system uses symbols to display facilities.2-dimensional icons (Plan View)
Navigation
2-21

Black plate (48,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Road colorThe road types are differentiated by colors.
Freeway:
(Red or light red (zoomed in))
Main road:(Brown or dark yellow)
Narrow street:(Gray)
Road with incomplete map data:(Dark green)
Traffic information on mapWith a subscription to the XM NavTraffic
®
service, traffic information is displayed.
“VIEWING AVAILABLE TRAFFIC INFOR-
MATION” page 6-7
Free Flow:(Green)
Moderate traffic:(Yellow)
Heavy traffic:(Red)
Section affected by serious traffic event:
(Purple)
The following traffic information icons may be
displayed
AccidentClosed roadInformationRoad workSlippery roadWeather
Incident
2-22
Navigation

Black plate (50,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Changing regionWhen setting a destination, the location can be
narrowed down by specifying the region or city.Specifying region:1. Push.
2. Highlight [Change Region] and push TER>.3. Highlight the preferred region and push . Available setting items
.
US1: CA, NV
. US2: AZ, CO, ID, MT, NM, OR, UT, WA, WY
. US3: IA, KS, MN, MO, ND, NE, SD
. US4: AR, LA, MS, OK, TX
. US5: IL, IN, MI, WI
. US6: DC, DE, KY, MD, OH, PA, VA, WV
. US7: CT, MA, ME, NH, NJ, NY, RI, VT
. US8: AL, FL, GA, NC, SC, TN
. US9: AK
. US10: HI
. Canada
INFO:
. It is also possible to select a region by
touching the map on the right side of the
screen.
. It is not possible to search for a route from
the continental United States to Hawaii.
Specifying city:When searching for a destination with “Places”,
“Freeway Entrance/Exit”, “Intersection” or “City
Center”, the search can be narrowed down by specifying the city.
1. Highlight [Select a City] and push
TER>.2. Enter the name of the city, highlight [List] and push .
A list screen is displayed.
INFO:
. The same screen will be displayed when
a location is searched from a street
2-24
Navigation

Black plate (51,1)
Model "R35-N" EDITED: 2009/ 10/ 30
address, and when [City] is highlighted
and is pushed on the
screen.
“FINDING ADDRESS” page 2-25
. Highlight [Last 5 Cities] and push
to display the last 5 cities
recently set as destinations.
3. Highlight the city of the destination from the list and push .
INFO:
In some cases, when a city name has been
entered, the number of matching destinations in
the “Matches” column may be different from the
number displayed on the list screen. If this
occurs, enter more characters to further reduce
the number of matches.
FINDING ADDRESSWhen the address of the destination is known,
use the following method to enter the address
and then have the system calculate a route. A
location near the preferred destination can also
be searched by entering the house number if the
map data contains the relevant data.1. Push , highlight [Street Address]
and push . A character input
screen is displayed.2. Enter the house number, highlight [OK] and push
. If the house number is not
available, highlight [No House #] and push
. A street name input screen is
displayed.
3. Enter the name of the street. After finishing the entry, highlight [List] and push TER>. A list of streets is displayed.
INFO:
When [City] is highlighted and is
pushed, a city can be specified by typing the
city name.“Specifying city” page 2-24
Navigation
2-25

Black plate (52,1)
Model "R35-N" EDITED: 2009/ 10/ 30
4. Highlight the correct street of the destina-tion from the list and push .
INFO:
In some cases, when a street name has
been entered, the number of matching
destinations in the “Matches” column may
be different from the number displayed on
the list screen. If this occurs, enter more
characters to further reduce the number of
matches.
5. The entire route is shown on the map. Highlight [Start] after confirming the location
of the displayed dest ination, and push
. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
Even after setting a destination, the location
of the destination can be adjusted, the route
can be stored, etc.“PROCEDURESAFTERSETTING
DESTINATION” page 2-43Setting by voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
To set the destination from a street address:
“Navigation” “Address” (Standard Mode)
“Address” (Alternate Command Mode)
INFO:
When using a voice command to set a street
name, it is recommended that the complete
street name is stated. Examples:
Correct input - North Elm Street
East Jefferson Boulevard
Incorrect input - Elm Street East Jefferson
FINDING PLACEThere are 3 methods that can be used to set the
destination to places of interest: typing the
name, choosing a category or selecting a
ZAGAT reviewed location. To help improve
searching, different start points can be chosen
to search from such as near current location,
near the destination or city center.Finding nearby place1. Push.
2. Highlight [Places] and push .
2-26
Navigation

Black plate (53,1)
Model "R35-N" EDITED: 2009/ 10/ 30
3. Highlight the preferred nearby category fromthe list and push .
A list screen is displayed.
INFO:
Highlight [Customize Nearby Places] to
customize the nearby places list to show
categories that are frequently used.
4. Highlight the preferred destination from the list, and push . The position of the selected location is displayed in the
preview on the right side of the screen.
INFO:
. A maximum of 100 facilities can be
displayed on the list screen.
. If the suggested route is already set, the
system displays the facilities located
along the route. To display all the icons,
deactivate [Show Along Route].
5. The entire route is shown on the map. Highlight [Start] after confirming the location
of the displayed dest ination, and push
. The system sets the destination
to the selected location and starts calculat-
ing a route.
INFO:
If there is a route already set, the newly selected
location can substitute a previously set destina-
tion or can be added to a route already set.
Other settings:The destination can also be set by pushing
in the current or scrolled location
map screen and selecting [Nearby Places].
Setting by voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
To display the nearby category list and select the
destination from it:
“Navigation” “Places” (Standard Mode)
“Places” (Alternate Command Mode)
Navigation
2-27

Black plate (54,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Searching by other methods1. Push.
2. Highlight [Places] and push .3. Highlight [All Categories or Name] and push
.
4. Set the narrowing down conditions for the
landmarks and push .
INFO:
Highlight [Change Region] and push TER> to change the region. A screen for
selecting a region is displayed.“Changing region” page 2-24
INFO:
If [Select a City] is highlighted and TER> is pushed, a city name input screen is
displayed. Specify the city to be searched
before narrowing down the categories.“Specifying city” page 2-24
5. Highlight the main category from the list and push .
2-28
Navigation

Black plate (55,1)
Model "R35-N" EDITED: 2009/ 10/ 30
INFO:
To select a category by directly inputting the
category name, highlight [Category Search]
and push . The category name
input screen is displayed.
6. Highlight the subcategory and push TER>.
INFO:
Subcategories may not exist depending on
the category that is selected.
7. Enter the name of the destination facility and highlight [List], and then push .
The facility list is displayed.
INFO:
. It is not necessary to enter the facility
name completely. It is also possible to
display the list screen only by high-
lighting [List] without entering the facility
name and pushing .
. The number of narrowed down points
are displayed in the “Matches” column.
. Up to two keywords (part of the facility
name) can be entered by highlighting
[AND Search] and pushing after entering the first facility name.
INFO:
The facility name can also be entered
directly by highlighting [Choose Name] on
the main category list screen and pushing
.
8. Highlight the preferred destination from the
list, and push .
Navigation
2-29