Page 231 of 290
230SERVICING AND MAINTENANCE
Perform the following inspections more frequently than
indicated in the Scheduled Servicing Plan:
❍check front disc brake pad condition and wear;
❍check cleanliness of bonnet and boot locks, as well as
cleanliness and lubrication of linkages;
❍visually inspect the condition of engine, gearbox,
transmission, pipes and hoses (exhaust – fuel supply
– brakes) rubber elements (boots – sleeves – bushes
etc.);❍check battery charge and fluid level (electrolyte); (see
“Battery” in this chapter);
❍visually inspect the condition of auxiliary drive belts;
❍check and, if necessary, replace the pollen filter; in
particular it should be replaced if a decrease in the air
flow into the passenger compartment is detected;
❍check air filter and replace, if required.
Page 252 of 290

6
TECHNICAL SPECIFICATIONS251
Identification data .......................................................... 252
Engine codes – bodywork versions .................................. 254
Engine ............................................................................ 255
Fuel supply system ......................................................... 257
Transmission .................................................................. 258
Brakes ............................................................................. 258
Suspensions .................................................................... 259
Steering ........................................................................... 259
Wheels ............................................................................ 260
Dimensions ..................................................................... 265
Performance ................................................................... 266
Weights ........................................................................... 267
Capacities ....................................................................... 269
Fluids and lubricants ...................................................... 271
Fuel consumption ........................................................... 273
CO
2emissions ................................................................ 274
Page 270 of 290
57 –
8/10 –
6.0 –
3.1 2.65
3.5 3.0
1.99 1.8
–0.8
6–57 –
8/10 –
5,9 –
2.75 2.4
2.9 2.55
2.4 2.0
–0.8
6–
TECHNICAL SPECIFICATIONS269
6
Unleaded petrol not less than
95 R.O.N (EN228 specifications)
Mixture of demineralised
water and PARAFLU
UP
in 50-50 proportion (▲)
SELENIA K P.E.
SELENIA WR P.E. (❍)
TUTELA CAR MATRYX ()
TUTELA TRANSMISSION
GEARFORCE (❍)
TUTELA TOP 4
Water and liquid mixture
TUTELA PROFESSIONAL SC 35
CAPACITIES
(▲) When the vehicle is used in particularly harsh climate conditions, we recommend using a mixture of 60% PARAFLUUP
and 40% distilled water.
() 1.4 Turbo Jet 150 HP version
(❍) 1.4 Turbo Jet 120 HP and 1.4 Turbo Multi Air versions
1.4 Turbo Jet 1.4 Turbo MultiAir Recommended fuelslitres kg litres kg and original lubricants
Fuel tank:including a reserve of:
Engine cooling system:
Engine sump:Engine sump and filter:
Gearbox/differential casing:
Hydraulic brake circuit with ABS:
Windscreen/rear window washer
fluid reservoir:
Page 273 of 290

SAE 75W-85 grade synthetic lubricant.
Exceeds API GL-4 PLUS specifications.
Classification 9.55550-MX3
SAE 75W grade synthetic base lubricant.
Classification 9.55550-MZ6
Synthetic based lubricant, grade SAE 75W-85.
Exceeds API GL-4 specifications.
Classification 9.55550-MZ1
Grease for constant-velocity joints with low
friction coefficient. NL.GI. 0-1 consistency
Classification 9.55580
Molybdenum disulphide grease
for high temperatures. NL.GI. 1-2 consistency
Classification 9.55580
Synthetic fluid for brake and clutch systems.
It exceedes the specifications: FMVSS no. 116 DOT 4,
ISO 4925, SAE J 1704. Classification 9.55597
Red protective with antifreeze action, based
on inhibited monoethyl glycol with organic formula.
Exceeding CUNA NC 956-16,
ASTM D 3306 specifications.
Additive for diesel fuel, protecting Diesel engines
Mixture of spirits and surfactants.
Exceeds CUNA NC 956-11 specifications.
Classification 9.55522
272TECHNICAL SPECIFICATIONS
TUTELA CAR TECHNYX Contractual Technical
Reference No. F010.B05
TUTELA TRANSMISSIONGEARFORCE
Contractual Technical
Reference No. F002.F10
TUTELA CAR MATRYX Contractual Technical
Reference No. F108.F02
TUTELA STAR 700
Contractual Technical
Reference No. F701.C07
TUTELA ALL STAR
Contractual Technical
Reference No. F702.G07
TUTELA TOP 4
Contractual Technical
Reference No.F001.A93
PARAFLU
UP(●)
Contractual Technical
Reference No. F101.M01
TUTELA DIESEL ARTContractual Technical
Reference No. F601.L06
TUTELA
PROFESSIONAL SC 35
Contractual Technical
Reference No. F201.D02 Brake fluid
Protective
agent for
radiators
Additive for
diesel fuel
Windscreen/
rear window
washer fluid
(
●) IMPORTANT Do not use fluids with different specifications for topping up or mixing.
(❑) When the vehicle is used in particularly harsh climate conditions, we recommend using a 60-40 mixture of PARAFLUUPand distilled water. Petrol
engine
lubricants
Gearboxes and manual
differentials
(1.6 Multijet versions)
Gearboxes and manual
mechanical (1.4 Turbo Jet
120 HP and 1.4 Turbo Multi
Air versions)
Gearboxes and manual
differentials (1.4 Turbo Jet
150 HP versions and Diesel
versions, 1.6 Multijet excluded)
CV joints differential side
CV joints wheel side
Hydraulic brakes and
hydraulically operated clutch
windscreen/rear window
washer/wiper
Cooling circuits.
Percentage of use:
50% water
50% PARAFLU
UP(❑)
To be mixed with diesel
(25 cc per 10 litres)
To be used diluted or undiluted
in windscreen/rear window
washer/wiper systems
Use Fluid and lubricant features for correct use of the car Genuine fluids and lubricants Applications