2011 Acura TSX ECO mode

199
Continued
Driving
When Driving
Shifting
Shift Lever Operation
Fully depress the clutch pedal to operate the shift lever and change gears, then
slowly release the pedal.
Depress the clutch pedal, and pause for a few seconds before shifting into
R
, or
shift into one of the forward gears for a moment. This stops the gears so they do
not “grind.”
Shifting NOTICE Do not shift to
R before the vehicle comes to a
complete stop.
Shifting to
R before stopping can damage the
transmission.
NOTICE Before downshifting, make sure the engine will
not go into the tachometer's red zone. Should this
occur, it can severely damage your engine.
There is a metallic part on the shift lever. If you
leave the vehicle parked outside for a long time on
a hot day, be careful before moving the shift lever.
Because of heat, the shift lever may be extremely
hot. If the outside temperature is low, the shift lever
may feel cold.
Recommended Shift Points
Driving in the highest gear that allows the engine
to run and accelerate smoothly helps to optimize
fuel economy and effective emissions control. The
following shift points are recommended:
Shift Up Normal Acceleration
1st to 2nd 17 mph (27 km/h)
2nd to 3rd 29 mph (46 km/h)
3rd to 4th 37 mph (59 km/h)
4th to 5th 43 mph (69 km/h)
5th to 6th 49 mph (79 km/h)
If you exceed the maximum speed for the gear
you are in, the engine speed will enter into the
tachometer's red zone. When this happens, you
may experience a slight jolt.
Manual transmission models Shifting
When you are not shifting, do not rest your
foot on the clutch pedal. This can cause your
clutch to wear out faster.

208Driving
When Driving
Tire Pressure Monitoring System (TPMS) - Required Federal Explanation
U.S. models Tire Pressure Monitoring System (TPMS) - Required
Federal ExplanationEach tire, including the spare (if provided), should be checked monthly
when cold and inflated to the inflation pressure recommended by the
vehicle manufacturer on the vehicle placard or tire inflation pressure label.
(If your vehicle has tires of a different size than the size indicated on the
vehicle placard or tire inflation pressure label, you should determine the
proper tire inflation pressure for those tires.)
As an added safety feature, your vehicle has been equipped with a tire
pressure monitoring system (TPMS) that illuminates a low tire pressure
telltale
when one or more of your tires is significantly under-inflated.
Accordingly, when the low tire pressure telltale illuminates, you should stop
and check your tires as soon as possible, and inflate them to the proper
pressure.
Driving on a significantly under-inflated tire causes the tire to overheat and
can lead to tire failure. Under-inflation also reduces fuel efficiency and tire
tread life, and may affect the vehicle's handling and stopping ability.
Please note that the TPMS is not a substitute for proper tire maintenance,
and it is the driver's responsibility to maintain correct tire pressure, even
if under-inflation has not reached the level to trigger illumination of the
TPMS low tire pressure telltale.

215
Refueling
Driving
Fuel Information
Fuel recommendation

Unleaded premium gasoline, pump octane number 91 or higher
4-cylinder models Use of a lower octane gasoline can cause occasional metallic knocking noise in the
engine and will result in decreased engine performance.
Use of a gasoline with a pump octane less than 87 can lead to engine damage. 6-cylinder models Your vehicle is designed to operate on premium unleaded gasoline with a pump
octane of 91 or higher.
If this octane grade is unavailable, regular unleaded gasoline with a pump octane
of 87 or higher may be used temporally.
The use of regular unleaded gasoline can cause metallic knocking noises in the
engine and will result in decreased engine performance. The long-term use of
regular-grade gasoline can lead to engine damage.
Top tier detergent gasoline
Because the level of detergency and additives in gasoline vary in the market,
Honda endorses the use of "TOP TIER Detergent Gasoline" where available to
help maintain the performance and reliability of your vehicle. TOP TIER Detergent
Gasoline meets a new gasoline standard jointly established by leading automotive
manufacturers to meet the needs of today's advanced engines.
Fuel Information NOTICE We recommend quality gasoline containing
detergent additives that help prevent fuel system
and engine deposits. In addition, in order to
maintain good performance, fuel economy, and
emissions control, we strongly recommend, the
use of gasoline that does NOT contain harmful
manganese-based fuel additives such as MMT, if
such gasoline is available.
Use of gasoline with these additives may adversely
affect performance, and cause the malfunction
indicator lamp on your instrument panel to come
on. If this happens, contact your dealer for service.
Some gasoline today is blended with oxygenates
such as ethanol or MTBE. Your vehicle is designed
to operate on oxygenated gasoline containing up
to 10% ethanol by volume. Do not use gasoline
containing methanol. If you notice any undesirable
operating symptoms, try another service station or
switch to another brand of gasoline.

Before Performing Maintenance
222Maintenance
Inspection and MaintenanceFor your safety, perform all listed inspections and maintenance to keep your
vehicle in good condition. If you become aware of any abnormality (noise, smell,
insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected
by a dealer. (Note, however, that service at a dealer is not mandatory to keep
your warranties in effect.) Refer to the separate maintenance booklet for detailed
maintenance and inspection information.
Types of Inspection and Maintenance Daily inspections
Perform inspections before long distance trips, when washing the vehicle, or when
refueling. Periodic inspections
Check the automatic transmission fluid level monthly. t
Automatic Transmission Fluid

P. 2 4 2
Check the brake fluid level monthly. t
Brake/Clutch Fluid

P. 2 4 4
Check the tire pressure monthly. Examine the tread for wear and foreign t
objects.
Checking and Maintaining Tires

P. 2 5 9
Check the operation of the exterior lights monthly. t
Replacing Light Bulbs

P. 2 4 7
Check the condition of the wiper blades at least every six months. t
Checking and Maintaining Wiper Blades

P. 2 5 7
Inspection and Maintenance U.S. models Maintenance, replacement, or repair of
emissions control devices and systems may be
done by any automotive repair establishment
or individuals using parts that are "certified"
to EPA standards.

According to state and federal regulations, failure
to perform maintenance on the maintenance main
items marked with # will not void your emissions
warranties. However, all maintenance services
should be performed in accordance with the
intervals indicated by the multi-information display.
Maintenance Service Items


P. 2 2 7
If you want to perform complex maintenance tasks
that require more skills and tools, purchase the
service manual.
Authorized Manual


P. 3 13

If you want to perform maintenance yourself, make
sure that you have the necessary tools and skills
first.
After performing maintenance, update the records
in the separate maintenance booklet.

228Maintenance
Maintenance Minder™ Resetting the Display
Reset the engine oil life display if you have performed the maintenance service.
1. Turn the ignition switch to ON
II
.
2. Display the engine oil life by repeatedly pressing the SEL /RESET button.
3. Press and hold the SEL /RESET button for 10 seconds or more.

The oil life reset mode is displayed on the multi-information display.
4. S e l e c t ”R E S E T” w i t h t h e
button.

The service code will disappear and the engine oil life display will return to
10 0 %.
To cancel the oil life reset mode, select ”CANCEL”, then press the SEL /RESET
button.
Resetting the Display NOTICE Failure to reset the engine oil life after a
maintenance service results in the system showing
incorrect maintenance intervals, which can lead to
serious mechanical problems.
The dealer will reset the engine oil life display after
completing the required maintenance service. If
someone other than a dealer performs maintenance
service, reset the engine oil life display yourself.
SEL /RESET
Button

(Information)
ButtonEngine Oil LifeMaintenance
Item Codes

Maintenance Under the Hood
Oil Check
235
Continued
Maintenance
Oil CheckWe recommend that you check the engine oil level every time you refuel.

Park the vehicle on level ground.
Wait approximately three minutes after turning the engine off before you check
the oil.
4-cylinder models 1. Remove the dipstick (orange handle). 6-cylinder models 1. Remove the dipstick (orange loop). All models 2. Wipe the dipstick with a clean cloth or
paper towel.
3. Insert the dipstick back all the way into its
hole.
Oil Check
If it is near or below the lower mark, slowly add oil
being careful not to overfill.
6-cylinder models 4-cylinder models

Maintenance Under the Hood
Changing the Engine Oil and Oil Filter
239
Maintenance
6. Check that the filter gasket is not stuck to
the engine contact surface.
If it is stuck, you must detach it.
7. Wipe away dirt and dust adhering to the
contact surface of the engine block, and
install a new oil filter.
8. Put a new washer on the drain bolt, then
reinstall the drain bolt. Tightening torque: 29 lbf∙ft (39 N∙m, 4.0
kgf∙m)
9. Pour the recommended engine oil into the
engine. Engine oil change capacity (including
filter):
4-cylinder models 4.2 US qt (4.0 L) 6-cylinder models

4.5 US qt (4.3 L)
10. Reinstall the engine oil fill cap securely
and start the engine.
11. Run the engine for a few minutes, and
then check that there is no leak from the
drain bolt or oil filter.
12 . Stop the engine, wait for three minutes,
and then check the oil level on the
dipstick.
If necessary, add more engine oil.
Changing the Engine Oil and Oil Filter
You will need a special wrench to replace the oil
filter. You can buy this wrench from a dealer.

When installing the new oil filter follow the
instructions supplied with the oil filter.

Reinstall the engine oil fill cap. Start the engine.
The low oil pressure indicator should go off within
five seconds. If it does not, turn off the engine, and
check your work.
Oil Filter
4-cylinder models 6-cylinder models 6-cylinder models
Oil Filter Drain Bolt
Washer

Maintenance Under the Hood
Engine Coolant
240Maintenance
6-cylinder models 1. Remove the right-side engine compartment
cover.
Engine Compartment Covers

P. 2 3 3
All models 2. Check the amount of coolant in the
reserve tank.
3. If the coolant level is below the MIN mark,
add the specified coolant until it reaches
the MA X mark.
4. Inspect the cooling system for leaks.

Reserve Tank
Engine Coolant 4-cylinder models NOTICE You will need a more concentrated coolant if you
are driving in extremely cold temperature below
-31 °F (-35 °C). Consult your Acura dealer for details
about a suitable coolant mixture.
If Honda antifreeze/coolant is not available, you
may use another major brand non-silicate coolant
as a temporary replacement. Check that it is a
high quality coolant recommended for aluminum
engines. Continued use of any non-Honda coolant
can result in corrosion, causing the cooling system
to malfunction or fail. Have the cooling system
flushed and refilled with Honda antifreeze/coolant
as soon as possible.
Do not add rust inhibitors or other additives to
your vehicle's coolant system. They may not be
compatible with the coolant or with the engine
components.
Engine CoolantThis coolant is premixed with 50% antifreeze and 50% water. Do not add any
straight antifreeze or water.
We recommend you check the engine coolant level every time you refuel. Check
the reserve tank first. If it is completely empty, also check the coolant level in the
radiator. Add the engine coolant accordingly.Specified coolant: Honda Long Life Antifreeze/Coolant Type 2
Reserve Tank MAX MIN Reserve Tank