2011 Acura TSX brake light

6Quick Reference Guide
Visual Index
Headlights
P.105, 247
Front Turn Signal/Parking/
Side Marker Lights
P.105, 252
Door Mirrors
P.114
Side Turn Signal Lights
P.105, 253
Maintenance Under the Hood
P.229
Windshield Wipers
P.108, 257
Door Lock/Unlock Control
P.91
Fog Lights
P.107, 251
Tires
P.259, 277
Opening/Closing the Trunk
P.95
Trunk Release Switch
P.96
Emergency Trunk Release Lever
P.97
Brake/Taillights
P.253
Rear Turn Signal Lights
P.253
Rear Side Marker Lights
P.253
Back-Up Lights
P.254
How to Refuel
P.216
Rearview Camera
*
See Navigation System Manual
High-Mount Brake Light
P.256

8Quick Reference Guide
Instrument Panel
P.63
Lights On IndicatorHigh Beam IndicatorFog Light Indicator
Temperature
Gauge
Fuel Gauge Speedometer
Tachometer
Low Fuel
Indicator
Security System Alarm
Indicator Multi-Information Display
Shift Lever Position Indicator
*
Gear Position Indicator
*
Gauges

P.75
Multi-Information Display

P.76
System Indicators

P.64
Lights Reminders
System IndicatorsSystem Indicators
VSA
® OFF Indicator
Turn Signal and
Hazard Warning
IndicatorsElectric Power
Steering (EPS)
IndicatorMalfunction
Indicator LampLow Oil Pressure
IndicatorCharging System
IndicatorAnti-lock Brake
System (ABS)
IndicatorVehicle Stability
Assist (VSA
®) System
Indicator
Seat Belt Reminder
IndicatorImmobilizer System
IndicatorSupplemental
Restraint System
IndicatorLow Tire Pressure/
TPMS IndicatorDoor and Trunk
Open IndicatorCruise Main IndicatorCruise Control
IndicatorSystem Message
Indicator Parking Brake
and Brake System
Indicator
U. S.Canada
Side Airbag Off
Indicator
U. S.Canada

15Quick Reference Guide
Wiper Blades
P.257
Replace blades if they leave
streaks across the windshield.
Lights
P.247
Inspect all lights regularly.
Tires
P.259
Inspect tires and wheels regularly. Check tire pressures regularly. Install snow tires for winter driving.
Maintenance

P.221
Under the Hood
P.229
Check engine oil, engine coolant, and windshield washer fluid.
Add when necessary. Check brake fluid and clutch fluid. Check the battery regularly.
Pull the hood release handle under the corner of the
dashboard. Locate the hood latch lever, pull the lever up, and lift up the
hood. When finished, close the hood and make sure it is firmly
locked in place.

17Quick Reference Guide
What to Do If
The ignition switch does not
turn from
to
. Why?t The steering wheel may be locked.
Try to turn the steering wheel left and
t
right while turning the ignition key.
The ignition switch does
not turn from
to
and I
cannot remove the key. Why?
The shift lever should be moved to
P
.
Why does the brake pedal
pulsate slightly when applying
the brakes?
This can occur when the ABS activates, and does not indicate
a problem. Apply firm, steady pressure on the brake pedal.
Never pump the brake pedal.
The rear door cannot be
opened from inside the
vehicle. Why?
Check if the childproof lock is in the
LOCK position. If so, open the rear
door with the outside door handle.
To cancel this function, push the
lever to the UNLOCK position.
Why do the doors lock after
I unlocked the doors using a
remote transmitter?
If you do not open the doors within 30 seconds, the doors are
relocked automatically for security.

18Quick Reference Guide
Why does the beeper sound
when I open the driver's door?
The beeper sounds when:
The key is left in the ignition switch.
t
The exterior lights are left on.
t
Why does the beeper sound
when I start driving?
The beeper sounds when:
Driver and/or front passenger are not wearing their seat
t
belts.
The parking brake lever is not fully released.
t
Why do I hear a screeching
sound when I apply the brake
pedal?
The brake pads may need to be replaced. Have your vehicle
inspected by a dealer.
Is it possible to use unleaded
gasoline with a Pump Octane
Number (PON) of 87 or higher
on this vehicle?
If premium unleaded gasoline with a PON of 91 or higher is
not available, you can temporarily use the gasoline with a PON
of 87 or higher.
This will result in decreased engine performance, and can
cause occasional metallic knocking noise in the engine. 4-cylinder models

Unleaded gasoline with a PON of 91 or higher is recommended.
6-cylinder models

Unleaded gasoline with a PON of 91 or higher is required.
The long-term use of a lower PON gasoline can lead to engine
damage.

Operating the Switches Around the Steering Wheel
Fog Lights
107
Controls
Fog Lights
When the low beam headlights are on, turn
the fog light switch on to use the fog lights.
Fog Lights
When the fog lights are on, the indicator in the
instrument panel will be on.
They go off when the headlights turn off, or when
the daytime running lights are on.
Indicators


P. 6 4
Daytime Running LightsThe high beam headlights and indicator come on slightly dimmer than normal.
The ignition switch is in ON t
II
.
The headlight switch is off, or in t
.
The parking brake is released. t
The lights remain on even if you set the parking brake. Turning off the ignition
switch will turn off the daytime running lights.
The high beam headlights return to the original brightness once the headlight
switch is turned on.
Fog Light Switch

Operating the Switches Around the Steering Wheel
Driving Position Memory System*
112Controls
1. Adjust the driver's seat to the desired
position, and turn the ignition switch to
ON
II
.
2. Press the SET button.
You will hear the beeper, and the
memory button indicator light will blink.
3. Press memory button
1
or
2
within five
seconds of pressing the SET button.
Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
Storing a Position in Memory
Automatic transmission models 1. Move the shift lever to
P
.
All models 2. Apply the parking brake.
3. Press a memory button (
1
or
2
).
You will hear the beeper, and the
indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
Recalling the Stored Position
Storing a Position in Memory
After you press the SET button, the storing
operation will be canceled when:
You do not press the memory button within five tseconds.
You readjust the seat position before the double- tbeep.
You turn the ignition switch to any position texcept ON
II.
Recalling the Stored Position
The seat will stop moving if you:
Press the SET button, or a memory button ( t
1 or
2).
Adjust the seat position.
t Automatic transmission models Shift into any position except t
P.
Manual transmission models Release the parking brake. t
Memory Button 1
Memory Button 2
Set ButtonMemory Buttons

Before Driving
Driving Preparation
183
Continued
Driving
Do not pile items higher than the seat height. t
They can block your view and may be thrown forward in the event of sudden
braking.
Do not place anything in the front seat footwells. Make sure to secure the floor t
mat. An object or unsecured floor mat can interfere with your brake and
accelerator pedal operation while driving.
If you have any animals on board, do not let them move around in the vehicle. t They may interfere with driving and a crash could occur.
Securely close and lock all doors and the trunk. t
Locking/Unlocking the Door from Inside

P. 9 3
Adjust your seating position properly. t
Adjusting the head restraint, too.
Adjusting the Seats

P.11 6
Adjusting the Head Restraints


P.11 8
Adjust the mirrors and steering wheel properly for your driving. t
Adjust them while sitting in the proper driving position.
Adjusting the Mirrors

P.114
Steering Wheel Adjustments


P.113
Interior ChecksStore or secure all items on board properly. t
Carrying too much cargo, or improperly storing it, can affect your vehicle's
handling, stability, stopping distance, and tires, and make it unsafe.
Maximum Load Limit

P.1 8 5
Interior Checks
The headlight aim is set by the factory, and typically
does not need to be adjusted. However, if you
regularly carry heavy items in the trunk or tow a
trailer, have the aiming readjusted at a dealer or by
a qualified technician.