2010 TOYOTA PRIUS display

320 3-2. Using the audio system
PRIUS_U (OM47668U) U.S.A.■
Adjusting sound quality
Turning adjusts the level.
*: The sound quality level is adjusted individually in each radio or CD mode.
Sound quality
modeMode
displayedLevelTurn to the leftTurn to the right
Low-pitched tones
*BAS -5 to 5
Low High
Mid-pitched
tones
*
MID
(type A only) -5 to 5
High pitched tones
*TRE -5 to 5
Front/rear
volume balance FAD F7 to R7 Shifts to rear Shifts to
front
Left/right volume balance BAL L7 to R7 Shifts to left Shifts to right

325
3-2. Using the audio system
3
Interior features
PRIUS_U (OM47668U) U.S.A.
■
Canceling automatic selection of a radio station
Push the same switch.
■ When operating the steering switches
On vehicles with touch tracer display, the steering switches operation status
is displayed on the instrument cluster for confirmation purposes. ( P. 182)
CAUTION
■To reduce the risk of an accident
Exercise care when operating the audio switches on the steering wheel.

329
3-3. Using the hands-free system (for cellular phone)
3
Interior features
PRIUS_U (OM47668U) U.S.A.
Using the hands-free system
■Audio unit
Displays Bluetooth
® con-
nection condition
If “BT” is not displayed, the
hands-free system cannot
be used.
Displays the reception level
Displays such items as
message, name, and phone
number
Lower-case characters and
special characters, such as
an umlaut, cannot be dis-
played.
Selects items such as menu
or number
Turn: Selects an item 
Press: Inputs the selected
item
Push and hold: Displays
information that is too long
to be displayed at one time
on the display
Selects speed dials

332 3-3. Using the hands-free system (for cellular phone)
PRIUS_U (OM47668U) U.S.A.
Operating the system by using a voice commandBy following voice gui dance instructions output from the speaker,
voice commands can be given to allow for operation of the hands-
free system without checking the display or operating .
■ Operation procedure when using a voice command
Press and say a command for a desired function. 
(  P. 334)
■ Auxiliary commands when using a voice command
The following auxiliary commands can be used:
Cancel: Exits the hands-free system
Repeat: Repeats the previous voice guidance instruction
Go back: Returns to the previous procedure
Help: Reads aloud the function summary if a help comment is registered for the selected function
Using the hands-free system for the first time
Before using the hands-free system, it is necessary to register a cel-
lular phone in the system. The phone registration mode will be
entered automatically when starting the system with no cellular
phone registered. Follow the procedure below to register a cellular
phone:

333
3-3. Using the hands-free
system (for cellular phone)
3
Interior features
PRIUS_U (OM47668U) U.S.A.Press
or .
The introductory guidance and phone name registration instructions
are heard.
Register a phone name by either of the following methods.
a. Select “Record Name” by using , and say a name to
be registered.
b. Press and say a name to be registered.
A voice guidance instruction to confirm the input is heard.
Select “Confirm” by using a voice command or .
A passkey is displayed and heard, and a voice guidance instruction
for inputting the passkey into the cellular phone is heard. Input the passkey into the cellular phone.
Refer to the manual that comes with the cellular phone for the oper-
ation of the phone.
Guidance for registration completion is heard.
STEP1
STEP2
STEP3
STEP4

342 3-3. Using the hands-free system (for cellular phone)
PRIUS_U (OM47668U) U.S.A.
Using the call history memoryFollow the procedure below to use a number stored in the call history
memory:
Press and say “Redial” (when using a number stored in
the outgoing call history memory) or “Call back” (when using a
number stored in the incoming call history memory).
Select the number by either of the following methods:
a. Say “Previous” or “Go back” until the desired number is displayed.
b. Select the desired number by using .
STEP1
STEP2

356 3-3. Using the hands-free system (for cellular phone)
PRIUS_U (OM47668U) U.S.A.Transferring data from the cellular phone
STEP2-1 Select “By Phone” and then “Confirm” by using a
voice command or .
STEP2-2 Transfer the data from the cellular phone.
Refer to the manual that comes with the cellular phone
for the details of transferring data.
STEP2-3 Select the data to be registered by either of the fol- lowing methods:
a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” by using a voice
command or .
b. Select the desired data by using .
Inputting a phone number by using STEP2-1 Select “Manual Input” by using .
STEP2-2 Input a phone number by using , and press again.
Input the phone number 1 digit at a time.

357
3-3. Using the hands-free
system (for cellular phone)
3
Interior features
PRIUS_U (OM47668U) U.S.A.Selecting a phone number from outgoing or incoming call history
STEP2-1 Select “Call History” by using a voice command or
.
STEP2-2 Select “Outgoing” or “Incoming” by using a voice
command or .
STEP2-3 Select the data to be registered by either of the fol- lowing methods:
a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” by using
a voice command or .
b. Select the desired data by using .