2010 JAGUAR XFR Timing chain

6. NOTE: Tsubaki timing drive only.
Install the lower timing chain making sure the coloured
chain links align correctly with the fuel rail high-pressure
fuel pumps camshaft and crankshaft sprocket markings.

7. CAUTION: Make sure that the tensioner spring is
correctly located.


NOTE: Tsubaki timing drive only.
Torque: 21 Nm









8. NOTE: INA timing drive only.
Install the lower timing chain making sure the coloured
chain links align correctly with the fuel rail high-pressure
fuel pumps camshaft and crankshaft sprocket markings.

10.


































11. CAUTION: If the variable valve timing (VVT) units are
knocked or dropped then the VVT must be replaced.
Remove the timing chain with the VVT units. www.JagDocs.com

14.


































15. CAUTION: If the VVT is knocked or dropped then the
VVT must be replaced.
Remove the timing chain with the VVT units.

7. CAUTIONS:


Do not allow the camshaft to rotate.


If the VVT is knocked or dropped then the VVT must
be replaced.


NOTE: Do not tighten at this stage.

Install the timing chain with the variable valve
timing (VVT) units.


















8.
Make sure that all the timing chain alignment marks are in the
positions shown.

10.




































11. Make sure the tensioner piston is fully extended. Then fully
depress and lock the tensioner piston with the grenade pin
before installation, failure to do this may result in damage
to the engine.

































CAUTION: Do not release the timing chain tensioner
locking pin at this stage.
Torque: 10 Nm

12. CAUTIONS:


Do not allow the camshafts to rotate.


If the VVT is knocked or dropped then the VVT must
be replaced.


NOTE: Do not tighten at this stage.

Install the timing chain with the VVT units.



















13.

Make sure that all the timing chain alignment marks are in the
positions shown.

15.




































16. Make sure the tensioner piston is fully extended. Then fully
depress and lock the tensioner piston with the grenade pin
before installation, failure to do this may result in damage
to the engine.

































CAUTION: Do not release the timing chain tensioner
locking pin at this stage.
Torque: 10 Nm