Opening and closing Master key with remote control
The remote control allows you to lock or unlock the
vehicle electronically.
Fig. 24 Fold-up
master key with
remote control
- To fold the key out and back in place, press the release
button~ fig. 24.
The transmitter and battery are located in the head of the remote
control. The receiver is located inside the vehicle. The maximum
effective range depends on several things. Remember, if the battery
is weak, the effective range decreases.
If you need to replace the remote contro l, or if you need to have it
repaired, you must see you r author ized Aud i dealer. Only then can you
use the key again.
Personalizing the master key
When the ignition is turned off or when the vehicle is locked, vario us
convenience sett ings are stored automatically and assigned to the
key that was used. The sett ings assigned to the key are automatically
recalled w ith you unlock the vehicle or when you open a door or when
you switch on the ignition .
• Climate control
• Centra l locking
• Windows and rear window sun blind •
Background lighting*
• Seat memory
• Adaptive Cru ise Contro l*
• Audi lane and s ide assist*
• Adva nced Parking System*
The
Remote control key f un ction must be activated in MMI
=> page 85, so that the settings for the driver's seat (including the
sett ings for the head restraint, steering column, safety belt height
and exterior mirrors) are saved on the master key through the seat
memory when the vehicle is locked, and are set automat ica lly when
the vehicle is unlocked.
[ i ] Tips
• If the ign it ion is switched on, the remote control system is deacti
va ted .
• The remote control system can be affected by other systems oper
ating in the same frequency range close to the vehicle, such as mobile
telephones, te lev ision broadcasting stations, etc.
• For Declaration of Compliance to United States FCC and Industry
Canada regulations =>
page 364. •
Battery replacement, master key
. w ',!
Fig. 25 Check light in
the master key ..
Seats and storage
Seats and storage
General recommendations
Why is your seat adjustment so important?
The safety belts and the airbag system can only provide
maximum protection if the front seats are correctly
adjusted.
Th ere a re va rious ways of ad justing t he fro nt seats to provide safe and
comfor ta ble suppo rt for th e dr iver and the front passenger . Ad just
your sea t properly so that :
• you can eas ily and quickly reach all the switches and controls in t he
in st rumen t pa nel
• your body is prope rly s upported th us reducing phys ica l stress and
f a tigue
• the safety be lts and airbag system can offe r maxim um protection
:::;, pag e 206.
In the following sect ions, you will see exactly how you can best ad just
your sea ts .
Th ere a re sp ecial regulations and instr uct io ns for installing a ch ild
sea t on the front passenge r's sea t. Always follow t he informat ion
r e gar ding ch ild safety provided in ::;,
pag e 231, "C hi ld Safety ".
L1}. WARNING
Incor rect seat ing position of the driver and all othe r passengers
can result in serious personal injury .
• Always keep your feet on the floor when the vehicle is in
motion -never put your feet on top of the instrument panel , out
of the window or on top of the seat cushion . This applies especially
to the passengers. If your seating position is incorrect, you
increase the risk of injury in the case of sudden braking or an acci-
& WARNING ( continued )
dent. If the airbag inflates and the seating position is incorrect,
this could result in personal injury or even death.
• It is important for both the driver and front passenger to keep
a distance of at least 10 inches (25 cm) between themselves and
the steering wheel and /or instrument panel. If you 're sitting any
closer than this , the airbag system cannot protect you properly. In
addition, the front seats and head restraints must be adjusted to
your body height so that they can give you maximum protection.
• Always try to keep as much distance as possible between your
self and the steering wheel or instrument panel.
• Do not adjust the dr iver's or front passenger's seat while the
vehicle i s moving. Your seat may move unexpectedly , causing
sudden loss of vehicle control and personal injury. If you adjust
your seat while the vehicle is moving , you are out of position.•
Driver's seat
Th e correct seat p osition is important for safe and
re lax ed driving.
W e recomme nd that you a djust t he dr ive r's sea t in t he
follow ing ma nne r:
- Adjust t he seat i n fore and aft d irect ion so t hat you can
easily p ush t he peda ls to the floor whi le keep ing your
k n ees sli ghtly bent =>
& in " Why is yo ur seat adjust men t
so impo rtan t?".
- Adjust t he seatback so t hat wh en you s it with you r bac k
agai nst t he seatbac k, you can st ill g rasp t he top of t he
steer ing wheel. ..,_
-Position the head restraint according to the occupant's
height ~
page 81. For maximum protection, the top of
the head restraint should be at least at eye level, prefer
ably higher and ideally level with the top of the head
~ page 191, fig. 200.
& WARNING
Never place any objects in the driver's footwell. An object could
get into the pedal area and interfere with pedal function. In case
of sudden braking or an accident, you would not be able to brake
or accelerate. •
Front passenger's seat
Always move the front passenger seat into the rearmost
position.
To avoid contact with the airbag while it is deploying, do not
sit any closer to the instrument panel than necessary and
always wear the three-point safety belt provided adjusted
correctly. We recommend that you adjust the passenger 's
seat in the following manner:
- Move the front passenger seat into the rearmost position
of the fore and aft adjustment range~
& in "Why is your
seat adjustment so important?" on
page 76.
- Bring the backrest up to an (almost) upright position.
Do
not ride with the seat reclined.
- The ideal position for the head restraint is with the upper
edge of the restraint level with the top of your head
~ page 81. You should not lower the top of the restraint
below the level of your eyes.
Con tro ls a nd e quip
m en t Vehicle
OP-eration
Seats and storage
-Place your feet on the floor in front of the passenger's
seat. •
Power seat
Controls
The operating logic for the switches corresponds to the
construction and function of the seat.
Fig. 71 Power seat:
Controls for seat
adjustment
The switches to adjust the seats correspond to the layout, the design
and the function of the seat. The seats are adjusted by moving the
switches following this logic.
© Upper thigh support~ page 78
@ Seat adjustment ~ page 78
© Massage funct ion* ~ page 79
@ Seatback angle~ page 79 and head restraint~ page 81 adjust-
ment
© Separa te adjustmen t of upper sea tback section ~ page 79
© Adjusting the lumbar support~ page 80
© Safety belt height adjustment~ page 204 ..,
Vehicle care Do-it-yourselt service iTechnical data
Seats and storage
& WARNING
• Never adjust the driver's or front passenger's seat while the
vehicle is moving. If you do this while the vehicle is moving, you
will be out of position. Always adjust the driver's or front passenger's seat when the vehicle is not moving.
• Be careful when adjusting the seat height. Check to see that no
one is in the way, or serious injury could result!
• Because the seats can be electrically adjusted with the ignition
key removed, never leave children unattended in the vehicle.
Unsupervised use of the electric seat adjustments may cause
serious injury. •
Upper thigh support
The adjustable upper thigh support provides optimal
support for the upper thigh when driving.
___ .. _:_·_-_.-_--·-·------·---.... _-_ ---.. ·-:.-_
Fig. 72 Power seat:
Switch for upper thigh
support
- To extend the upper thigh support , push the switch
forward.
- To make the upper thigh support shorter, push the switch
to the rear.
& WARNING
Never adjust the seat cushion while the vehicle is moving. If you
adjust your seat while the vehicle is moving, you are out of posi
tion. Always adjust the seat cushion when the vehicle is not
moving. •
Seat adjustment
Fig. 73 Power seat:
Switch for seat adjust
ment
Moving the seat forward and backward (D
- Press the switch forward or backward horizontally=>&.
Adjusting the seat height 0 and ® together
-Pull the switch evenly at both ends to raise the seat =:>& .
-Push the switch evenly at both ends to lower the seat
=> & .
Angling the seat cushion up and down@ or®
-To angle the seat cushion up, pull the switch at the front
only =>& .
-Alternatively, push the switch at the rear only=>& . .,_
-To angle th e s eat c ush io n down, push the sw itc h at the
front only:::::, &.
-Alt ernatively, pull the switc h at the rear only:::::,&.
& WARNING
• Never adjust the driver's or front passenger's seat while the
v ehicle is moving . If you do this while the veh icle is moving , you
will be out of po sition. Alway s adjust the driver's or front
pa ssenge r's seat when the vehicle is not mo ving.
• Be careful when adjusting the seat height. Check to see that no
one is in the way , or serious injury could result!
• Becau se the seat s can be el ectrically adjusted with the ignition
key removed, never leave children unattended in the vehicle.
Unsupervis ed use of the electri c seat adjustments may cau se
seriou s inju ry. •
Applie s to ve hicl es: with ma ssag e funct ion
Massage function
0 0
i
Fig . 74 P ow er s eat:
M assa g e f unc tion
- Press the sw itc h to turn on the massage function .
The mass age funct ion r uns fo r abo ut 10 m inutes . The passenger's
back is massaged by contin uous adjustment of the lumbar support .
Contro ls a nd e quip
m en t Vehicle
OP-eration
Seats and storage
The curvature of the lumbar support can also be adjusted during the
Massage to m ake it more or less aggressive. This v aries the intens ity
of t he
Massage to the leve l desired by the occupa nt.
Once the massage f unctio n stops after abo ut 10 min utes, the lumbar
s u pport a utomat ically retu rns to the posi tion i n wh ich it wa s last set.
[ i ] Tips
Th e massage f unct io n can be interrupte d at any time by pressing the
switch . The lumbar support remains in its current position. •
Adjusting the seatback
-0
i
Fig. 75 Power se at:
S w itch f or seat bac k
ang le
F ig. 76 Pow er se at:
S witch f or a dju st ing
uppe r seatba ck se ction ...
Vehicle care Do-it-yourselt service iTechnical data
Seats and storage
Adjusting the angle of the seat back
- Push the switch=> page 79, fig. 75 forward or to the rear
in the direction of the arrow to adjust the angle of the seat
back =>& .
Adjusting the angle of upper seatback section
-Push the switch=> page 79 , fig. 76 forward or to the rear
to adjust the ang le of upper seatback section => & .
& WARNING
• Never adjust the seatback while the vehicle i s moving . If you
adju st your seat while the vehicl e is moving , you are out of po si
t ion. Neve r adjust the seatback when th e vehicle is moving .
• To reduce the ri sk of injury in the ca se of sudden brak ing or
ac cident , front pa sseng ers must ne ver ride in a moving vehicle
with th e seatba ck reclined . Safe ty belt s and the airbag sy stem
onl y offer m aximum prote ctio n when the se atback is upr ight and
the safety belt s are properly po sitioned on the bod y. The more the
seatback is reclined , the gr eater the ris k of personal inju ry from an
incorre ct seating po sition and impr operly p osition ed safe ty
belts .•
Lumbar support
The lumbar support can be adjusted to fit the natural
curva ture of the occupant's spine .
OB
Adjusting the contour
... 0
i
Fig . 7 7 P ower s eat:
S wit ch shell fo r l umba r
s u p po rt
- Push the forward depression on the switch shell to
increase the curvature.
- Push the
rear depression on the switch shell in order to
decrease the curvature .
Adjusting the height
-Push the top depression on the switch shell to mov e the
suppo rt to a
higher pos it ion in the backrest.
- Push th e
bottom depression on t he switch shell to move
the support to a
low er position in the bac krest .
The lumbar support is part icularly effective in support ing the nat ura l
curvatu re of the spin e so that the seating position is mo re comfort-
ab le ove r long d istances. ..
& WARNING
Never adjust the lumbar support while the veh icle is moving. If
you adjust your seat while the vehicle is moving, you are out of
position. Never adjust th e seatba ck when th e vehicle is moving .•
Seat adjustments in MMI
The passenger's seat ca n be adjusted t o various positions
by the d river.
I j ' • ' • ~ !
'
Passenge r's seat
• Convenience s ide v iew ....
I
-
--·· I
12 :0Q AM ',r I Fi g. 7 8 MMI di sp la y:
Pas seng er's se at
Convenience side view
- Select Systems in the CAR menu .
- Sel ect
Seat adjustment .
-Select Passenger's seat .
-Select Convenience side view=> fig . 78 .
- Con tin ue to pres s th e co ntrol knob u ntil t he adjus tment
proc ess is comp lete .
Seat symmetry
-Select Systems in the CAR menu.
Con trol s and equ ip
ment Vehicle
OP-eration
Seats and storage
-Select Seat adjustment .
- Select Passenger's seat.
-Select Seat symmetry .
- Continue to press t he contro l kn o b un til the adjus tme nt
process is comp lete .
Using the Convenience side view fu nction, the passenger's se at is
adjus ted so that the dr iver has the best poss ib le view to the righ t.
When the Conven ience side view is set, the spec ific position of the
dr ive r's seat is taken into consideratio n.
Us ing the
Seat symmetry f u nction, the passenger's seat can be
moved to the same posi tion as the drive r's seat. The settings for the
dr iver's seat are imported and set automatically .•
Head restraints
Adjusting head restraints , front seats
The head restraints mus t be adjusted properly to provide
protection .
Vehicle care
Fig . 7 9 D riv er's s eat
h ea d re straint
ad just in g the height
tiJ,
Do-it-yourselt service iTechnical data
Seats and storage
Fig. 80 A dju sti ng th e
co mfort head r estrai nt
s ide suppor ts
The head restraints on the front seats can be adj usted to
provide safe support to head and neck at the optimum he ight
and angle . When optimally adjusted, the top of the restraint
should be level with the top of the head=>
page 191, "Proper
adjustment of head restraints" .
Height adjustment
-Push the switc h up or down to adjust t he head restraint to
your height =>
page 81, fig. 79 .
- Adjus t the head restraints so that the top of the head
restraint is
at least level with your eyes or higher .
Adjusting the angle
-Grasp the side of t he head restraints w ith bot h hands and
push them forward or bac kward.
Adjusting the side supports
- Pull or press the side supports into th e desir ed position
=> fig . 80 .
Refe r to ~ page 191, "P roper adjustment of head restrain ts" for
guidelines on how to adjust the height of the front head restra ints to
sui t the occupant's body size.
& WARNING
• Driving w ithout h ead r estraints or with head restraint s that are
not properl y adju sted increa se s the ri sk of serious or f atal n eck
i njury dramati cally .
• Read and he ed all WARNING S~
page 191 .
[ i ] Tips
• Correct ly adjusted head restra ints and safety be lts are an
extremely effective combinat ion of safety features.
• Powe r adjustable head rest raints ca n only be removed by an
author ized repair fac ility.
• When you adjust the sea t towa rd the front o r upward, the head
restraints are automatically lowered to keep them clea r of the roof
liner. Be aware that after you move the sea t ba ck agai n toward the
rear or lower it again, the head res train ts will
not automa tically
resume the ir origi na l position and have to be readjusted .•
Rear head restraint (center seating
position)
C: Fi g. 81 Center rea r
hea d restrai nt:
ad justin g the h eig ht ..