____________________________________________ C_l_e _a_ n_ i n--= g=--- a_n_ d----' p,__ r_o _t_ e_ c_ t_ i _o_ n __ _
0 Note
• Never use a power washer to clean the power top itself.
• To avoid damaging your vehicle, always make sure that there is
suff icient distance between the spray head and soft mater ials l ike
rubber hoses, plastic parts and sound -deadening materials. Never
aim the spray head at the same po int for a long time. This also applies
to cleaning headlights and painted bumpers. Remember: the closer
the nozzle is to the surface of the mater ial, the greater the stress on
the material. •
Power top care
The power top requires special care.
Keeping your top looking great and mak ing certain that it lasts a long
time depend to a great extent on proper use and care. Remove bird
droppings as soon as possible, since the corrosive chemicals in them
wi ll cause the rubber impregnation in your top to swell and possibly
allow the fabric to leak.
With
normal soiling, all you need to do is clear the top with a soft
brush and clear water. Always brush in the direction of the fabric from
front to rear.
If the top is
very dirty and has spotted areas clean it with a br ush
using a convert ible top cleaner . Always brush in the direction of the
fabric from front to rear. Rinse with plenty of clear water, and allow
the top to air -dry .
Chamois are not sui tab le for drying the top .
Never use gasoline, spot remover, benzene, paint thinner or solvents
to remove spots. We recommend that you only use cleaners espe
cially formulated for use on convertib le tops, and that you follow the
produce use directions carefully . Authorized Audi deals can provide
detailed information.
Safety first
& WARNING
Always read and heed all WARNINGS and the information on
:=> page 260.
0 Note
Never use a high-pressure power washer to clean the power top. •
Applies to ve hicles : w it h w ind deflecto r
Wind deflector
Clear the wind deflector with wate r or, if it is heavily soiled, a chemi
ca lly neutra l cleaning solution.
& WARNING
Always read and heed all WARNINGS and the information on
:=>page 260. •
Waxing
Wax protects the vehicle's paint.
-Use a man ually applied car wax occasionally to protect the
paint .
A good wax coating protects the veh icle paint to a large extent
agains t the environmental factors listed under =>
page 260,
"Washing " and even against slight scratches.
You can use a liquid car wax to protect your paint as soon as one week after your vehicle has been delivered.
Even if you regularly use a
waxing process in automatic car washes,
we recommend that you manually apply a coat of wax to give the .,_
Vehicle care Technical data
____________________________________________ C_l_e _a_ n_ i n--= g=--- a_n_ d----' p,__ r_o _t_ e_ c_ t_ i _o_ n __ _
Occasionally apply a colorless vinyl or leather preservative to retain
the material's lust er and pliability.
& WARNING
Always read and heed all WARNINGS and other information
~page 260. •
Aluminum trim
Use only neutral-pH products to remove spots and deposits from
aluminum surfaces. Chrome care products and alkaline cleaners w ill
attack aluminum surfaces and can damage them over time.
& WARNING
Always read and heed all WARNINGS and other information
~page 260. •
Touch-up paint
Minor paint damages should be touched up immediately.
- Use either a touch-up paint stick or spray paint to cover
minor scratches and nicks.
Your authorized Audi dea ler has touch-up paint for minor scratches
and stone chips. Scratches should be touched up soon after they
occur to prevent corrosion.
If a spot starts to rust, however, a simple touch-up job will not be
enough. The affected surface must be sanded smooth and coated
with an anti-rust primer before the painted finish can be restored.
The number for the original vehicle paint can be found on the vehicle identification label~
page 340.
Safety first
& WARNING
Always read and heed all WARNINGS and other information
:=>page 260. •
Windows
Clear vision to all sides .
Clean all windows regularly to remove road film and car wash
wax buildup.
- Remove snow from windows using a brush.
- Use a plastic ice scraper to remove ice from windows and
mirrors .
- Remove other residue on the windows with a spray-on
glass cleaner.
- Wipe the windows dry with a clean piece of cloth or
kitchen paper towel.
The best way to remove snow from windows and mirrors is to use a
brush. Use a non -abrasive
plastic ice scraper -better sti ll, a spray
deicer - to remove
ice from windows and mirrors.
The windows must not be cleaned with insect remover or wax since
t hese can interfere with the function of the windshield wiper blades
(chatter) .
Oil , grease, or silicone residue can be removed with
glass cleaner or
silicone remover . However, wax residue requires the use of a specially
formulated solvent. Please contact your authorized Audi dealer for
advice on safe products for wax removal.
Windows should also be cleaned on the inside at regular intervals. ..,.
Vehicle care Technical data
____________________________________________ C_l_e _a_ n_ i n--= g=--- a_n_ d----' p,__ r_o _t_ e_ c_ t_ i _o_ n __ _
detergent . Apply the water with a damp cloth or sponge and pat the
fabric dry with an absorbent, dry cloth.
Stains from chocolate or makeup should have detergent paste
rubbed into them. Afterwards, remove the soap with water (damp
sponge).
Alcohol can be used to treat stains from grease, oil, lipstick or a ball
point pen . Melted grease or dye must be patted off using absorbent
material. It may be necessary to retreat the areas with detergent
paste and water.
I n the case of general soiling of the upholstery and cover mater ial, we
recommend hiring a specialist that has the equipment to clean the
seat covers and other fabric surfaces by shampooing and spray
extraction.
& WARNING
Always read and heed all WARNINGS and the information
=>page 260.
[ i ] Tips
Open Velcro fasteners on your clothing can damage the seat cover.
Please make sure that Velcro fasteners are closed. •
Plastic parts and instrument panel
Always use a clean cloth moistened in clear water to clean these
areas. For persistent dirt use an Aud i approved
solvent-free plastic
cleaner/protectant.
& WARNING
Solvents can change the properties of some plastics and make it
harder for the airbag to deploy .
Safety first
& WARNING (continued)
• Never clean the instrument panel or the surface of airbag
modules with cleaning products that contain solvents.
• Products containing solvents will make the surface of this part
porous.
• Serious injuries can result if plastic parts come loose when the
a irba g is deployed.
• Always read and heed all WARNINGS and other information
=>page 260.
0 Note
Cleaning agents containing solvents will attack the material and can
change the way it behaves .•
Applies to vehicles: w ith na tur al leather
Natural leather
Audi makes great efforts to maintain the properties,
natural look and feel of interior leather.
General
We offe r many different types of leathe r on our veh icles. Most are
different types of nappa leather, which has a smooth surface and
comes in various colors.
Th e intensity of the colo r determines the visual cha racteristics and
appearance. If the surface of the leather has a typica l natural look,
then the leather is a nap pa leather that has been left in a relatively
natural condition. This leather offers particularly good comfort and
breathes well. Fine veins, closed grains, insect bites, skin folds, and
subtle variations in color remain visible. These characteristics demon
strate that the mater ial is natu ral.
Natural nappa leather is not covered by a color finish. It is therefore
more sensitive to soiling and wear, which is something you need to ..,_
Vehicle care Technical data
-~_C_ le_ a_n_ i_ n_ g=- a_ n_d___. p_ ro_ t_e _c_ t_ i_o _n ___________________________________________ _
consider if children, animals or other factors might prove to be partic
ularly hard on the leather.
By contrast, leather types that are covered by a colored finish layer
are more durable. This has a positive effect on the leather's resistance
to wear and soiling in daily use . On the other hand, the typical charac
teristics of natural leather are barely or not apparent . However, this
does not mean that the leather itself is of inf erior quality.
Care and handling
Because of the exclusive nature of the types of leather that Audi uses
and the ir un iqu e properties (such as sensitivity to oils, grease, so iling,
etc.), you will need to be somewhat careful with these leathers, and
a certain type of care is required. For example, dark clothing mate
ria ls can disco lor leather seats (especially if such clothing is damp and
was not dyed correctly). Dust and dirt particles in pores, folds, and
seams can have an abrasive effect and can damage the leathe r
surface as well as weaken seams .
Th e leather should be cleaned regu larly as needed. After having been
used for a relatively long time, your leather seats will acquire a rich
aged finish. This is a characteristic of natural leather and a sign of
true quality.
In order to ma intain the value of this natural product over the life of
your vehicle, you should fo llow the recommendations below:
0 Note
• To keep your leather from bleaching out, do not allow it to be
exposed to bright sunlight for long periods of time . If you have to
leave the vehicle parked outside for long periods, cover the leather to
protect it from direct exposure to sunlight.
• Sharp objects on clothing, such as zippers, rivets or sharp pieces
on belts can leave pe rmanent scratches or scrape marks on the
surface of the leather.
W Tips
• After each time you clean the leathe r and at regular intervals, use
a leather preservative cream that contains UV-blockers and that
wor ks into the leather. This cream will nourish and moisturize the
leather, helping it to breathe and s tay supple . It also helps to build up
a protect ive coating on the surface.
• Clean the leather every 2 -3 months, and clean any areas that get
soiled.
• Remove fresh marks made by ballpoint pens, ink, lipstick , shoe
polish, etc. as soon as poss ible.
• Preserve the color of the leather as needed by using a special
colored leather care cream to touch up areas of uneven color .•
Ap plies to veh icles : with nat ural lea ther
Cleaning and caring for leather upholstery
and trim
Natural leather requires special care and attention.
Normal cleaning
-Clean soiled areas with a slightly moistened cotton or
woolen cloth.
More stubborn dirt
- More stubborn dirt can be removed using a cloth satu
rated with a mild soap solution (2 tablespoons mild liquid
soap).
- Never allow the soap solution to satu rate the leather, and
make certain that no water soaks into the seams .
- Wipe off the soap solution with a soft, dry cloth. .,_
Cleaning and protection -
---------------=---------=----
Cleaning spots
- Remove fresh water-based spots (such as coffee, tea,
juices, blood) with a n abso rbe nt cloth or paper towe l.
- Remove fresh
grease or oil-based spots (such as butter,
mayonnaise, chocolate) w ith an absorbent cloth or paper
towel, or use the cleaner from t he leat her care kit if the
spot has not yet penet rated into the s urface of the
leather.
- Use an oil/grease dissolv ing spray, if
oil/grease spots
have dried on .
-Remove specific kinds of spots (ballpo int pe n, fe lt marker,
fingernai l polish , water -based pa int , shoe polish, etc .)
with a spot remover speci fica lly formu lated for leat her .
Leather care
- Ev ery half ye ar us e an a pproved leath er car e product
(avai lab le fro m yo ur authori zed Audi d eale r) to ca re for
the le ather .
- A pply the produc t very spa rin gly .
- Wipe it o ff with a da mp cloth.
If you have any quest ions about cleaning and car ing for the leather in
yo ur vehi cle, it i s be st t o co ntac t you r author ized Aud i dealer, who w ill
be glad to help you and tell you about our fu ll range of leather care
prod ucts, s uch as:
• Leather cleaning and ca re k it
• Creams to ca re for colored leat her
• Spot removers for ballpoint pens, s hoe polish, etc.
• O il/gre ase di sso lv in g sp ray
• N ew and upcoming prod ucts.
Safety first
& WARNING
Always read and heed all WARNINGS and other information
:=> page 260 .
0 Note
• Never use chemical so lvents (e.g. lighter fluid, turpentine), waxes,
shoe po lish or similar products on the leather surfaces in your Audi.
• T o avo id da mage, have st ubbor n sta in s removed by a co mmerci al
clean ing specialist .•
A pp lies to v ehicle s: w it h Alcan ta ra upho lst ery
Cleaning Alcantara ® (synthetic suede)
Removing dust and dirt
- Moiste n a c loth, squ eez e out e xce ss wat er and wipe down
th e sea t surfaces .
Removing stains
-Mo iste n a clo th with luk ewarm wa ter or wi th dilut ed ethyl
(rubbing) alcohol.
- Dab at the stai n. Sta rt a t the outside and wor k in wards.
- Once the sta in is no lo nger vis ible , use a soft dry clot h or
t iss ue to soak up t he m oisture .
Do not use leather cleaning products on A lcantara .
Yo u m ay use a suit ab le sh am poo for removing dus t and d irt.
Dust and gr it in the pores and seams ca n scratch a nd damage the
s u rface . If the car is left s tanding in the s un fo r long periods, the
Alcanta ra sho uld b e prot ected aga inst direct su nlight to preve nt it
from fading. Slight co lor var iat ions will deve lop in no rma l use and are
not a n ind icatio n of material deterioration .
~
Vehicle care Technical data
-Cleaning and protection pn, _____________________ _
0 Note
• Never use chemical so lvents (e.g. lig hte r fluid, turpentine), waxes,
shoe po lish or simi lar p roducts on Alca ntara ® surfaces .
• To avo id damage, have stubborn stains removed by a commerc ia l
cleaning specialist .
• Do not use brushes, stiff sponges or sim ila rly abrasive cleaning
aids. •
Safety belts
Only well-maintain ed safety belts work reliably when
needed .
-Keep be lts clea n.
- For cleani ng, use a mi ld soap and wa ter solution. Let be lts
d ry thoroug hly and away fro m dir ect sun light.
- Do not allow in ertia re el s afety b elts to ret ra ct bef ore t hey
are comp le tel y dry .
- C heck the condi tion of y our safety bel ts
regularly .
Heavily soiled safety belts may no t re tract p roper ly .
& WARNING
Damaged safety belts can break in a crash.
• Anything that might damage your safety belts could mean
that you and your passengers would not be adequately protected
in an a ccident.
• Safety belt performance depends on correct installation. Never
remove belts from the vehicle to clean them.
• Do not use chemical cleaning agents , bleach or dyes. They have
corro sive properties which weaken the webbing .
& WARNING (c on tinued )
• When cleaning your safety belts , inspect them for damage. If
you discover damage , see your authorized Audi d ealer .
• Always read and heed all WARNINGS and other info rmation
=:> page 260 . •
Engine compartment
B e especi ally care ful w hen cleaning the engine comp art
men t.
Always switch off the ignition before cleaning the engine=>& .
Plenum panel
Remove leaves from the plenum panel in front of the windsh ield
un der th e eng ine hoo d. This p revents the wate r drain holes from
becom ing b locked, and it prevents debris from entering the ve hicle
inter io r thr ough the heat ing and ventila tion ducts.
Corrosion protection
Th e engine compartment and tran smission have been cor rosion
protected at the factory.
Goo d an ti- cor ros ion treatmen t is very impo rtan t, pa rtic ula rly in the
w inte r. If the vehicle is frequently driven on sa lt treated roads, t he
entire eng ine compa rtment and plenum pane l sho uld be thoroug hly
cleaned at the end of w inter and retreated to prevent sa lt damage . At
the same time, the underside of the vehicle should be washed as we ll.
If the eng ine co m par tment is clea ned at any time wi th grease
removing solutions
2l, or if you have the engine washed, the anti
c o rrosion treatment is a lmost always remove d as we ll.
It is the refore
essential to have a long-last ing corrosion protect io n reapplied to all
s u rfaces, seams, joints and components in the engine compartmen t. ~
2
l Use on ly the co rrect clean ing so lut ions . Neve r use gaso line or d iese l fuel.
_____________________________________________ C_h _ e_ c_ k_in --= g'-- a_n _d_ f_i _ll _i_n -=g ::;__ ____.1111
& WARNING (co ntinued )
-Alway s use extreme caution to prevent clothing , jewelry , or
long hair from getting caught in the radiator fan, V-belts or
other moving parts, or from contacting hot parts. Tie back hair
before start ing , and do not wear clothing that will hang or
d roop into the engine.
• Minimize expo sure to emis sion and chemical hazards~& .
& WARNING
California Proposition 65 Warning:
• Engine exhaust, some of it s constituents, and certain vehicle
components contain or emit chemicals known to the State of Cali
fornia to cause can cer and birth defects and reproductive harm . In
addition, certain fluids contained in vehicles and ce rtain products
of component wear contain or emit chemicals known to the State
of California to cause cancer and birth defects or othe r reproduc
tive harm.
• Battery posts, terminals and related accessories contain lead
and lead compounds, chemicals known to the State of California
to cause cancer and reproductive harms . Wash hands after
handling.
0 Note
When adding fluids , a lways make sure that they are poured into the
proper co nta iner o r filler opening, otherwise serio us damage to
vehicle systems will occur.
<£> For the sake of the environment
To detect leaks in time, inspect the vehicle floor pan from underneath
reg ula rly . If yo u see spot s from o il or o ther vehicle fluid s, have your
vehicle inspected by an authorized Aud i dea ler. •
Vehicle OP-eration
Engine compartment
These are the most i mportan t it ems that you can check.
Fig . 220 Typ ical layout for c ontainer s and engine oil filler cap
(D Jump start point( +) under a cover ........ .. .. .. .. . 293, 334
@ Brake fluid reservo ir ( ) . . . . . . . . . . . . . . . . . . . . . . . . 290
@ Engine oil f iller c ap
('1::r. ) . . . . . . . . . . . . . . . . . . . . . . . . 285
© Coolant ex pansion ta nk (-L ) . . . . . . . . . . . . . . . . . . . . . 28 7
© Jump start point( -) w ith he x head screw ..... ... .. . 293 , 33 4
© Winds hield/head light washer container (0 ) . . . . . . . . 295
(j) Power steering reservoir . . . . . . . . . . . . . . . . . . . . . . . . 246
Th e posi tion of the eng ine o il filling hole ~ fig. 220 (i tem @) can
differ depending on the eng ine des ign . ..,.
Vehicle care Do-it-yourselt service iTechnical data
lffl) __ C_ h_ e_c _k _i _ n _g ~ a_n _d_ f_il _l_in _ g _________________________________________ _
in. WARNING
Before you check anything in the engine compartment, always
read and heed all WARNINGS~
& in "Working in the engine
compartment" on
page 280. •
Engine oil
Engine oil specifications
The engine oil used in your Audi needs the right kind of oil.
The engine in your Audi is a sophisticated power plant that was built
to exacting specifications. This engine needs the right kind of engine
oil that meets specifications regarding quality and viscosity so that it
can run smoothly and reliably. Choosing the right oil and changing oil
within the time and mileage intervals printed in your vehicle 's
Warranty
& Maintenance booklet matters a lot more today than it did
years ago. Audi has developed a special quality standard for engine oil
that will help assure that your vehicle 's engine will get the lubrication
it needs for proper operation .
Modern engine lubrication has taken a quantum leap in the last few
years. Many synthetic oils available today provide better engine lubri
cation that can outlast traditional petroleum-based oils, making
them a smart choice for use throughout the life of your Audi.
Whether you use synthetic or petroleum-based engine oil, the oil that
you use must conform to Audi's oil quality standard VW 502 00 to
help keep your vehicle's engine running smoothly and help prevent
the formation of harmful deposits , sometimes called "sludge", that
over time can lead to expensive repairs.
At the time of printing, engine oils available in the U.S. and Canada
that meet the exacting specifications of Audi oil standard VW 502 00
are synthetic engine oils. This does not mean, however, that every
synthetic engine oil will meet Audi oil standard VW 502 00. So always
be sure that you use an approved oil. To help prevent the formation of harmful deposits
use only oil with
the following specifications printed on the oil container:
Audi oil standard VW 502 00
Oil container labels may carry the specification singly or in combina
tion with other designations and oil quality standards.
Viscosity
Engine oils are graded according to their viscosity. The proper
viscosity grade oil for your engine depends on climactic or seasonal
conditions where you drive. You can use oil with a viscosity grade of
SAE 5W40 across all temperature ranges for normal driving condi
tions.
However, if engine oil viscosity grade SAE 5W40 is not available, you
can also use viscosity grade SAE 5W -30 or SAE OW -40 as long as it
meets Audi oil quality standard VW 502 00 specifications.
Because engine oil that meets the Audi oil standard may not be avail
able everywhere when you need it, we strongly recommend that you
always carry with you an extra quart (liter) of oil that expressly
conforms to the VW 502 00 specification, in case you have to top off
the oil while on the road.
Only if the level of the oil is at or below the minimum mark - and no
oil that expressly conforms to Audi oil standard VW 502 00 specifica
tions is available - may you top off with a high quality engine oil, pref
erably synthetic-based, that meets ACEA A3, ACEA AS or ACEA BS or
API SL specifications, but even then, only in viscosity grades SAE 5W-
40, SAE SW-30, or SAE OW-40 . However, during the entire time
between oil change intervals, never top off with more than a total of
0.5 qt/liter engine oil that does not conform to Audi oil specification
vw 502 00.
For more information about engine oil that has been approved for
your vehicle, please contact either your authorized Audi dealer or
Audi Customer Relations at 1 (800) 822-2834 or visit our web site at
www.audiusa.com or www .audicanada.ca. Here you will also find a
current list of oils (manufacturers, brand names etc.) that conform to
Audi oil standard VW 502 00. ._