2010.5 Peugeot 508 Owner's Manual

251
05 TRAFFIC INFORMATION
Access to the "TRAFFIC INFORMATION" menu
Go from the list to the menu (left/right).
" " " " " " " " " " " " " " " " " " Traffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c informationTraffi c information " " " " " " " " " " " " " " " " " "
or
Press " TRAFFIC "

252
05
1
2
3
4
CONFIGURE THE FILTERING AND DISPLAY OF TMC MESSAGES
TMC (Traffi c Message Channel) messages contain information on traffi c and weather conditions, received in real time and transmitted to the driver in the form of audible announcements and symbols on the navigation map.
The navigation system can then suggest an alternative route to avoid a traffi c problem.
Press the TRAFFIC button to display the Traffi c information menu.
Select the " Geographic fi lter " function Geographic fi lterGeographic fi lterand confi rm.
The system offers a choice of:
- " Retain all the messages ",
or
- " Retain the messages "

253
05
2
1
1
2
3
TRAFFIC INFORMATION
PRINCIPAL TMC SYMBOLS
Red and yellow triangle: traffi c information, for example:

Black and blue triangle: general information, for example:
RECEIVING TA MESSAGES
The TA (Traffi c Announcement) function gives priority to TA al ert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffi c report is transmitted, the current audio source (Radio, CD, USB, ...) is interrupted automatically to play the TA message. Normal playba ck of the audio source resumes at the end of the transmission of the message.
Press RADIO to display the " FM/AM band " menu.
Select " Guidance options "then confi rm.
Select " Activate/Deactivate TA "then confi rm.
The volume setting for TA mesages can be adjusted only during the transmission of this type of alert.

254
06 USING THE TELEPHONE
Access to the "TELEPHONE" menu
" " " " " " " " " " " " " " " " " " PhonePhonePhonePhonePhonePhonePhonePhonePhonePhonePhonePhonePhonePhonePhonePhonePhonePhonePhone " " " " " " " " " " " " " " " " " "
Press PHONE .
In " Call list ", select a number in the list and confi rm OK to start the call.
Connecting a different telephone deletes the list of recent calls.
No telephone connected.
Telephone connected.
Incoming call.
Outgoing call.
Synchronization of address book in progress.
Telephone call in progress.
In the top bar of the permanent display
Calls received.
Calls sent.

255
1
2
5
6
3
4
06
PAIRING A TELEPHONE on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio unit must be carried out with the vehicle stationary .
Activate the telephone's Bluetooth function and ensure that it is "shown to all" (telephone confi guration).
Press PHONE .
Select the name of the desired peripheral from the list of devices detected then select " Connect " and confi rm.
The system offers to connect the telephone:
- in " Hands-free mode "(telephone only),
- in " Audio " mode (streaming: playing music fi les on the telephone),
- or " All " (for selection of both modes).
Select " OK " and confi rm.
Select " Bluetooth functions " and confi rm.
Select " Peripherals search " and confi rm.
The list of peripherals detected is displayed. Wait until the " Connect " button is available.
USING THE TELEPHONE

256
8
06
7
Enter the same code on the telephone then accept the connection.
Then accept automatic connection on the telephone to allow the telephone to reconnect automatically every time the vehicle is started.
On return to the vehicle,the last telephone connected automatically reconnects, within around 30 seconds after switching on the ignition. (Bluetooth activated and visible).
To modify the automatic connection mode, remove the pairing a nd pair the telephone again with the desired mode.
USING THE TELEPHONE
The " Hands-free mode " should be used in preference if "Streaming" is not desired.
The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you.
The ability of the system to connect in only one mode depends on the telephone. The two modes may both connect by default.
Select a code for the connection then confi rm " OK ".

257
1
2
2
3
1
3
4
06 USING THE TELEPHONE
Press PHONE .
Select " Dial " then confi rm.
Select " Directory of contacts "then confi rm.
Dial the telephone number using the virtual keypad selecting each number in turn.
Confi rm " OK " to make the call.
Press PHONE or make long press on TEL .
CALLING A NEW NUMBER CALLING A CONTACT
Select the desired contact and confi rm.
Select the number and confi rm to start the call.
MAKING A CALL Use of the telephone is not recommended while driving. We recommended that you park safely or make use of the steering mounted controls.

258
1
2
06
1
USING THE TELEPHONE
CALLING A RECENTLY DIALLED NUMBER
Press PHONE or make a long press on TEL , select " Call list " and confi rm.
Select the desired number and confi rm.
To erase the calls log, press PHONE , select " Phone functions " and confi rm then select " Delete calls log " and confi rm.
ENDING A CALL
Press HANG UP .
or
Or make a long press on the steering mounted TEL button.