2010.5 Peugeot 407 C Owner's Manual

 53 Manual
When stationary, release the steering
wheel by pushing the control forwards.
Adjust the height and reach of the steer-
ing wheel then lock by pulling the control
fully.
Electric
When stationary, adjust the height and
reach of the steering wheel by moving
the control:

 forwards or rearwards to adjust the
reach.

 upwards or downwards to adjust the
height.

 50

1. Driver's seat handle.

2. Passenger seat courtesy handle.
Steering wheel adjustment Access to the rear seats

4. Mirror adjustment.

A. Door mirror selection, adjustment
and folding control.

1. Selection of the driver’s side mirror.

2. Selection of the passenger’s side
mirror.

3. Folding the mirrors.
Rear view mirror adjustment

 49

 48
Door mirror adjustment Storing driving positions
This memorisation stores the electric
adjustment of the driver's seat, steering
wheel and door mirrors.
You can store two driving positions using

buttons M/1 and M/2 .

 55
To provide optimum vision when parking, the rear view mirror
glass automatically lightens
when reverse is engaged.

Front seat belt

1. Fastening.

2. Height adjustment.

 87

1. Stop position.

2. Running position.

3. Starting position.
Ignition switch

B. Windows manual or automatic open-
ing and closing control.

1. Driver's electric window.

2. Passenger's electric window.
Electric windows

 69 A heavy object (key fob...), at-
tached to the key and weighing
down on its shaft in the ignition
switch, could cause a malfunction.

The selected position is shown in the instrument panel by the corresponding indicator.
Ring A
Automatic illumination of
headlamps: activate or
deactivate the function via
the multifunction screen
confi guration menu.
Ring B
Front foglamps (one turn)
Front foglamps and rear
foglamps (two turns)

 75
2. Fast wipe.

1. Normal wipe.

I. Intermittent wipe.

0. Park.

AUTO. Automatic wipe then single wipe.

A. Screenwash.

 78
Wipers Lighting
Lighting off
Automatic illumination of
healamps
Sidelamps
Dipped/Main beam head-
lamps

Driver and passenger automatic programme
(comfort). Passenger’s side temperature adjustment.
Driver’s side temperature adjustment.
Air fl ow adjustment.
Ventilation off. Driver’s air distribution adjustment.
Front visibility control.
Exterior air intake.
Interior air recirculation.
Rear screen demisting.

 40
Passenger air distribution adjustment.
Digital air conditioning (Dual-zone)

 20 With the ignition on, the orange and red
warning lamps come on.
With the engine running, these warning
lamps should go off.
If a warning lamp remains on, refer to
the page concerned.
Lighting of the indicator lamp indicates
the status of the corresponding function.

A. With the ignition on, the fuel gauge
needle should rise.

B.
With the engine running, the associated
low level warning lamp should go off.

C. With the ignition on, the oil level in-
dicator should display "OIL OK" for
a few seconds.
If the levels are not correct, top up the
level which is low.
Warning lamps

 22
Switch panel Instrument panel

 102

A. Deactivation of the front
and/or rear parking sen-
sors.

B. Central locking.

C. Deactivation of the inte-
rior protection alarm.

D. Hazard warning lamps.

E. Selection of the electroni-
cally controlled suspen-
sion.

F. Deactivation of the elec-
tronic stability programme
ESP.
 70

 68

 84

 96

 85

 90

1. Insert the key.

2. Select the "OFF" position.

3. Remove the key keeping the switch
in the new position.
* According to country. Passenger's airbag deactivated
This warning lamp remains on
in the instrument panel whilst
the airbag is deactivated.
Front passenger's airbag *
When the ignition is switched on, if a
front occupant has not fastened their
seat belt and if the vehicle speed is
below 12 mph (20 km/h), the seat belt
warning lamp comes on.
The warning lamp goes off when the
seat belt(s) concerned is(are) fastened.
If the vehicle speed is above 12 mph
(20 km/h), the seat belt warning lamp
fl ashes, together with an audible signal
and a message in the multifunction
screen identifying the seat belt(s) which
is(are) not fastened.
Front seat belt fastening detection

 87
For the safety of your child, it is essen-
tial that you deactivate the passenger's
airbag when you install a "rear facing"
child seat on the front passenger seat.
Otherwise, the child would risk being
seriously injured or killed if the airbag
were to infl ate.

Cruise control
This prevents the vehicle from exceed-
ing the speed programmed by the driver
(minimum speed 20 mph (30 km/h)).

1. Selection/Switching off speed limiter
mode.

2. Decrease the programmed value.

3. Increase the programmed value.

4. Speed limiter on/off.
The values must be set with the engine
running.

 97
Speed limiter

 99
This enables the vehicle to maintain
a constant speed programmed by the
driver.

1.
Selection/Switching off cruise control
mode.

2. Decrease the programmed value
and storing a speed.

3. Increase the programmed value and
storing a speed.

4. Cruise control on/off.
In order to be programmed or activated,
the vehicle speed must be higher than
25 mph (40 km/h), with at least fourth
gear engaged on the manual gearbox. The cruise control or speed limiter mode
appears in the instrument panel when it
is selected.

Cruise control

Speed limiter
Display in the instrument panel