2010.5 Peugeot 206 P Dag display

INSTRUMENTS and CONTROLS
15
PETROL - DIESEL MANUAL GEARBOX INSTRUMENT PANELS
Panel which groups together the vehicle operation dials and indicator lamps.

4. Speedometer.
Indicates the current speed of the moving vehicle (km/h).

5. Screen.

6. Screen display zero reset button.
Resets the selected function to zero (trip distance recorder or service in-
dicator).

7. Instrument panel lighting button.
Adjusts the brightness of the lighting of the instrument panel.
DIALS

1. Rev counter.
Indicates the speed of rotation of the engine (x 1 000 rpm).

2. Fuel gauge.
Indicates the quantity of fuel remain- ing in the tank.

3. Coolant temperature.
Indicates the temperature of the en- gine coolant (° Celsius).
A. Cruise control.
Speed limiter.
(km/h)

B. Trip distance recorder.
(km)

C. Service indicator.
(km) then,
Distance recorder.
(km)
These three functions are displayed in succession when the ignition is
switched on.
For more information, refer to the sec-
tion which corresponds to the function
and to the display associated with it.
Display

INSTRUMENTS and CONTROLS
23
SERVICE INDICATOR
System which informs the driver when the
next service is due, in accordance with
the manufacturer's servicing schedule.
The point at which the service is due is
calculated from the last indicator zero
reset. It is determined by two param-
eters:
- the distance travelled,
- the time elapsed since the last ser-vice. More than 1 000 km remain before
the next service is due
For 5 seconds after the ignition is
switched on, the spanner symbolising
the service operations comes on. The
distance recorder display line indicates
the distance remaining before the next
service is due.

Example: 4 800 km remain before the
next service is due.
For 5 seconds after the ignition is
switched on, the display indicates:
5 seconds after the ignition is switched
on, the spanner
goes
off ; the distance
recorder resumes its normal operation.
The display then indicates the total and
trip distances. Less than 1 000 km remain before
the next service is due

Example: 900 km remain before the
next service is due.
For 5 seconds after the ignition is
switched on, the display indicates:
5 seconds after the ignition is switched
on, the distance recorder resumes its
normal operation. The spanner re-
mains on to indicate that a service
must be carried out soon.

ii
ii
INSTRUMENTS and CONTROLS
24
Following this operation, if you
wish to disconnect the battery,
lock the vehicle and wait at least
fi ve minutes for the zero reset to be
taken into account.
Service indicator zero reset
After each service, the service indicator
must be reset to zero.
The procedure for resetting to zero is as
follows:

 switch off the ignition,

 press and hold the trip distance re-
corder zero reset button,

 switch on the ignition; the distance
recorder display begins a count-
down,

 when the display indicates "=0" ,
release the button; the spanner
disappears.
The distance remaining may be
weighted by the time factor, depend-
ing on the driver's driving habits.
Therefore, the spanner may also
come on if you have exceeded the
two year service interval.
Service overdue
For 5 seconds after the ignition is
switched on,
the spanner fl ashes to
indicate that the service must be carried
out as soon as possible.

Example: the service is overdue by
300 km.
For 5 seconds after the ignition is
switched on, the display indicates:
5 seconds after the ignition is switched
on, the distance recorder resumes its
normal operation. The spanner re-
mains
on .

INSTRUMENTS and CONTROLS
26
MONOCHROME SCREEN A Adjusting the parameters
Press and hold button 1 for two seconds
to access the settings; the data fl ashes,
indicating it is ready to be modifi ed.
Then, each press of button 1 scrolls
through the various data in the following
order:
- language of information displayed,
- hours (12 then 24 hour mode),
- minutes,
- year,
- month,
- day,
- unit of temperature (degrees Cel- sius or Fahrenheit).
Pressing button 2 allows modifi cation
of the data selected. Press and hold for
rapid advance (return to start after the
last possible value).
After 7 seconds with no action, the main
display returns; the modifi ed data are
now recorded.

Note: Pressing button 2 briefl y displays
the ambient temperature for a few
seconds.
When the ambient temperature is be-
tween -3° and 3 °C, the ambient tem-
perature display on the screen takes
priority over the clock display.
This displays the following information:
- time,
- date,
- ambient temperature * (this fl ashes
when it is between -3 and 3 °C),
- audio system information,
- a door check (e.g.: ''left front door open''),
- warning messages (e.g. ''remote control battery fl at'') or information
messages (e.g. ''economy mode
active''), displayed temporarily.
* With digital air conditioning only.

INSTRUMENTS and CONTROLS
27
MONOCHROME SCREEN B
This enables the following information
to be displayed:
- time,
- date,
- ambient temperature * (this fl ashes when it is between -3 and 3 °C),
- status of the doors. The display shows you, by means of a graphic,
whether a door is open,
- warning messages (e.g. ''battery charge fault'') or information mes-
sages (e.g. "fuel level low''), dis-
played temporarily, can be cleared
by pressing button 1 or 2 ,
- trip computer. Setting the parameters
Press button
1 for two seconds to access
the settings. The information fl ashes to
show it is ready to be modifi ed.
Then, individual presses on button 1
allow you to scroll through the various
data in the following sequence:
- language in which the information is displayed,
- unit of distance (kms or miles),
- unit of temperature (degrees Cel- sius or Fahrenheit),
- time format (12 then 24 hour mode),
- hour,
- minutes,
- year,
- month,
- day.
Pressing button 2 allows you to change
the information selected. Maintain the
pressure for rapid scrolling.
After 7 seconds without operation, the
screen returns to the normal display
and the modifi ed data is recorded.

Note: Pressing button 2 briefl y displays the
outside temperature for a few seconds.
When the ambient temperature is be-
tween -3° and 3 °C, the temperature
display takes priority over the time on
the screen.
* With digital air conditioning only.

INSTRUMENTS and CONTROLS
28
SCREEN B
TRIP COMPUTER
ZERO RESET
Press the stalk for more than two seconds.
Range
This shows the distance that can still be
covered with the fuel remaining in the
tank.

Note: this fi gure may increase if there
is a change in the style of driving or the
road surface, producing a signifi cant
drop in current fuel consumption.
When the range is less than 20 miles
(30 km), three segments are dis-
played. After fi lling with fuel, the range
is displayed when it exceeds 60 miles
(100 km).
If horizontal segments are displayed for
long periods instead of digits, contact a
PEUGEOT dealer.
Pressing the button on the end of the


wiper
stalk enables the following data
to be displayed:
- range
- distance travelled
- average fuel consumption
- current fuel consumption
- average speed Average fuel consumption
This is the average fuel consumption
since the computer was last set to zero.
Current fuel consumption
This is the average fuel consumption
during the last few seconds.
This function is displayed only when the
vehicle is travelling at a speed greater
than 20 mph (30 km/h). Distance travelled
This indicates the distance travelled
since the computer was last set to
zero.
Average speed
This is the average speed calculated
since the computer was last set to zero
(with the ignition on).

34
DIGITAL AIR CONDITIONING
1. Automatic comfort programme
Automatic operation
2. Temperature adjustment
The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit.
3. Automatic visibility programme
The automatic comfort programme may
not be suffi cient to quickly demist or de-
frost the windscreen and side windows
(humidity, several passengers, ice...).
This system is designed to operate
effectively in all seasons, with the win-
dows closed.
When the engine is cold, to prevent
too great a distribution of cold air, the
air fl ow will only reach its optimum level
gradually.
In cold weather, it favours the distribu-
tion of warm air to the windscreen, the
side windows and the footwells only.
The air conditioning can only operate with the engine ru
nning.

 Press the "AUTO" button.
The "AUTO" symbol is dis-
played.
 Press the arrows 1 (up and
down) to change this value.

 In this case, select the auto-
matic visibility programme.
We recommend that you use this mode:
it provides optimised automatic con-
trol of all of the functions, passenger
compartment temperature, air fl ow,
air distribution and air recirculation, in
accordance with the comfort value that
you have selected. The system automatically controls the
air conditioning, the air fl ow and the air
intake and provides optimum distribu-
tion of the ventilation to the windscreen
and side windows.

 To exit this programme, press the

"AUTO" button again.
A setting around 21 provides an opti-
mum level of comfort. Depending on
your requirements, a setting between
18 and 24 is usual.
On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfort value, there is no need
to alter the value displayed in order to
obtain the required level of comfort. The
system corrects the temperature differ-
ence automatically and as quickly as
possible.

!
!
35
Manual control
Depending on your requirements, you
can make a different selection from that
offered by the system by changing a
setting. The other functions will still be
controlled automatically.

 Press the "AUTO" button to return
to fully automatic operation.
4. Air conditioning On/Off
5. Air distribution adjustment 6. Air fl ow adjustment
7. Air intake/Air recirculation
Deactivation of the system
Avoid prolonged operation in inte-
rior air recirculation mode (risk of
condensation and of deterioration
of the air quality).
Avoid driving for too long with the
air conditioning deactivated.

 Press this button to switch
the air conditioning off. The

"ECO" symbol is displayed.

 Press this button several
times in succession to direct
the air fl ow in turn towards:
 Press the "-" but-
ton to reduce the air
fl ow.

 Press the "+" button
to increase the air
fl ow.

 Press this button to recircu-
late the interior air. The air
recirculation symbol is dis-
played.
 Press the "OFF" button.
This action deactivates all of the func-
tions of the air conditioning system.
The temperature is no longer main-
tained at a comfortable level. However,
a slight fl ow of air, due to the movement
of the vehicle, can still be felt.

 Press the "OFF" , "AUTO" or "visi-
bility" button again to reactivate the
system with the values which were
set before it was deactivated.
Switching the system off may result in some
discomfort (humidity, condensation).

 Press the button again to return
to automatic operation of the air
conditioning. The symbol " A/C " is
displayed.
- the windscreen and side windows (demisting or defrosting),
- the windscreen, the side windows and the footwells,
- the footwells,
- the central vents, the side vents and the footwells,
- the central and side vents. Air recirculation prevents exterior odours
and smoke from entering the passenger
compartment.
Choose this position for rapid cooling of
the passenger compartment.

 As soon as possible, press this button
again to permit the intake of exterior
air and prevent condensation.