2010.5 Peugeot 206 P Dag display
[x] Cancel search: displayPage 114 of 119
10
108
GENERAL FUNCTIONS
On/off
W i t h t h e i g n i t i o n k e y i n
the accessories position
or with the ignition on,
press button A to switch
t h e a u d i o e q u i p m e n t o n
or off.
Anti-theft system
T h e a u d i o e q u i p m e n t i s c o d e d i n s u c h
a way that it can only operate in your
v e h i c l e . I t w o u l d n o t w o r k i f fi t t e d i n a n -
other vehicle.
The anti-theft system is automatic
and requires no action on your part.
Press button C to increase the audio
e q u i p m e n t v o l u m e o r b u t t o n B to de-
crease it.
A continuous press of buttons B and C
adjusts the volume gradually.
AUDIO SETTINGS
Press button G several
times in succession to
access the bass (BASS) ,
treble (TREB) , loudness
(LOUD) , fader (FAD) ,
balance (BAL) and auto-
matic volume correction
settings.
E x i t f r o m a u d i o m o d e
is automatic after a few
seconds without any action or by press-
ing button G f o l l o w i n g c o n fi g u r a t i o n o f
the automatic volume correction. Adjusting the bass
When "BASS" is dis-
played, press button H
or I to change the setting.
- "BASS -9" for a mini-
mum bass setting,
- "BASS 0" for a stan-
dard setting,
- "BASS +9" f o r a m a x i m u m b a s s
setting.
Adjusting the treble
When "TREB" is displayed, press but-
ton H or I to change the setting.
- "TREB -9" for a minimum treble
setting,
- "TREB 0" for a standard setting,
- "TREB +9" f o r a m a x i m u m t r e b l e
setting.
Adjusting the loudness (LOUD)
This function automatically emphasises
bass and treble tones.
Press button H or I to switch the func-
tion on or off.
Note: bass, treble and loudness set-
t i n g s a r e s p e c i fi c t o e a c h s o u r c e . T h e y
can be set differently for the radio
o r C D .
The audio equipment can operate for
30 minutes without the ignition being
switched on.
Page 115 of 119
10
109
Adjusting the front/rear sound
distribution (Fader)
When "FAD" is displayed, press
button H or I .
Button H increases the volume in the
front.
Button I increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press
button H or I .
Button H increases the volume on the
right.
Button I increases the volume on the
left.
Automatic volume correction
This function automatically adjusts the
volume in relation to the speed of the
vehicle.
Press button H or I to switch the func-
tion on or off. RADIO
Notes on radio reception
Your car radio will be subject to phe-
nomena which do not affect domestic
radio sets. Both AM and FM reception is
subject to various forms of interference.
T h i s i s n o r e fl e c t i o n o n t h e q u a l i t y o f t h e
a u d i o e q u i p m e n t , b u t i s d u e t o t h e n a -
ture of the signals and the way in which
they are transmitted.
On AM, interference may be noticed
when passing under high voltage power
lines or bridges, or in tunnels.
On FM, interference may be the result
of increasing distance from the trans-
m i t t e r , d e fl e c t i o n o f t h e s i g n a l s b y o b -
stacles (mountains, hills, buildings,
etc.), or of being in an area which is not
covered by a transmitter. Selecting radio mode
Press button O .
Selecting a waveband Press button O b r i e fl y
to select the FM1, FM2,
FMast and AM wave-
bands.
Page 116 of 119
10
109
Adjusting the front/rear sound
distribution (Fader)
When "FAD" is displayed, press
button H or I .
Button H increases the volume in the
front.
Button I increases the volume in the
rear.
Adjusting the right/left sound
distribution (Balance)
When "BAL" is displayed, press
button H or I .
Button H increases the volume on the
right.
Button I increases the volume on the
left.
Automatic volume correction
This function automatically adjusts the
volume in relation to the speed of the
vehicle.
Press button H or I to switch the func-
tion on or off. RADIO
Notes on radio reception
Your car radio will be subject to phe-
nomena which do not affect domestic
radio sets. Both AM and FM reception is
subject to various forms of interference.
T h i s i s n o r e fl e c t i o n o n t h e q u a l i t y o f t h e
a u d i o e q u i p m e n t , b u t i s d u e t o t h e n a -
ture of the signals and the way in which
they are transmitted.
On AM, interference may be noticed
when passing under high voltage power
lines or bridges, or in tunnels.
On FM, interference may be the result
of increasing distance from the trans-
m i t t e r , d e fl e c t i o n o f t h e s i g n a l s b y o b -
stacles (mountains, hills, buildings,
etc.), or of being in an area which is not
covered by a transmitter. Selecting radio mode
Press button O .
Selecting a waveband Press button O b r i e fl y
to select the FM1, FM2,
FMast and AM wave-
bands.
Page 118 of 119
10
111
RDS *
Using the RDS on FM
The RDS (Radio Data System) allows
you to continue listening to the same
s t a t i o n , w h a t e v e r f r e q u e n c y i t i s u s i n g
in the region you are travelling through. Press the "RDS" button
b r i e fl y t o s w i t c h t h e f u n c -
tion on or off.
The multifunction screen will indicate:
- "RDS" if the function is selected,
- "(RDS)" if the function is selected
but not available.
RDS station following
The display indicates the name of the sta-
tion selected. When the RDS is selected,
the radio searches continuously for the
transmitter which is broadcasting the se-
lected station with the best reception.
T r a f fi c i n f o r m a t i o n p r o g r a m m e ( T A ) Regional following mode (REG)
W h e n t h e y a r e p a r t o f a n e t w o r k , c e r -
tain stations broadcast regional pro-
grammes in the various areas they
serve. The regional following mode
allows you to continue listening to the
same programme.
To do this, press the
"RDS" button for
more than two seconds to switch the
function on or off.
A n y t r a f fi c i n f o r m a t i o n a n n o u n c e m e n t
will be given priority, whatever source
y o u a r e l i s t e n i n g t o ( r a d i o , C D ) .
If you wish to interrupt a message,
press the
"TA" button; this switches the
function off.
N o t e : t h e v o l u m e o f t h e t r a f fi c i n f o r -
mation is independent of the volume
of normal radio listening. You can
adjust it using the volume button.
The setting will be stored and will be
used for subsequent messages.
Search by type of programme (PTY)
This allows you to listen to stations broad-
c a s t i n g a s p e c i fi c t y p e o f p r o g r a m m e
( N e w s , C u l t u r e , S p o r t , R o c k . . . ) . When FM is selected,
press the "TA" button for
more than two seconds
to switch the function on
or off. To search for a
PTY programme:
- select the PTY function,
- press button J or L b r i e fl y t o s c r o l l
down the list of the different types of
programme offered,
- when the programme of your choice is displayed, press button J or L for
more than two seconds to carry out
an automatic search (following an
automatic search, the PTY function
is switched off).
In PTY mode, the types of programme
can be stored. To do this, press the pre-
selection buttons "1" to "6" for more
than two seconds. Press the corre-
s p o n d i n g b u t t o n b r i e fl y t o r e c a l l t h e t y p e
of programme stored.
EON system
This system connects stations which are
p a r t o f t h e s a m e n e t w o r k . I t p e r m i t s t h e
broadcasting of TA t r a f fi c i n f o r m a t i o n o r
of a PTY programme broadcast by a sta-
t i o n w h i c h i s p a r t o f t h e s a m e n e t w o r k a s
the station to which you are listening.
This service is available when you have
selected the TA t r a f fi c i n f o r m a t i o n p r o -
gramme or the PTY search by type of
programme.
Press the
"TA" button
to switch the function on
or off.
The multifunction screen will indicate:
- "TA" if the function is selected,
- "(TA)" if the function is selected but
not available.
* According to destination country.