2010.5 Citroen DS4 fuse

143Fittings
Illuminated glove
box
Its lid has locations for storing a pen, a pair of glasses, tokens, maps, a cup...  To open the glove box, raise the handle. It is lit when the lid is opened. It houses the front passenger airbag deactivation switch A . If the vehicle is fitted with air conditioning, it provides access to the ventilation nozzle B , distributing the same cooled air as the vents in the passenger compar tment.
It gives access to the dashboard fusebox (see "Practical information - § Changing a fuse").
Portable ashtray
 Pull the cover to open the ashtray.  To empty it, remove the ashtray by pulling it upwards.
To avoid any problem of inter ference or risk of over turning, do not place the ashtray near the gear lever.

143Fittings
Illuminated glove
box
Its lid has locations for storing a pen, a pair of glasses, tokens, maps, a cup...  To open the glove box, raise the handle. It is lit when the lid is opened. It houses the front passenger airbag deactivation switch A . If the vehicle is fitted with air conditioning, it provides access to the ventilation nozzle B , distributing the same cooled air as the vents in the passenger compar tment.
It gives access to the dashboard fusebox (see "Practical information - § Changing a fuse").
Portable ashtray
 Pull the cover to open the ashtray.  To empty it, remove the ashtray by pulling it upwards.
To avoid any problem of inter ference or risk of over turning, do not place the ashtray near the gear lever.

No aler t will be given in the following situations: - in the presence of stationary objects (parked vehicles, barriers, street lamps,
road signs...), - with vehicles moving in the opposite direction, - driving on a sinuous road or a sharp corner,
The aler t is given by a warning lamp which comes on in the door mirror on the side in question as soon as a vehicle - car, lorry, cycle - is detected and the following conditions are fulfilled: - all the vehicles must be moving in the same direction, - the speed of your vehicle is between 6 and 75 mph (10 and 140 km/h), - the difference in speed between your vehicle and the other vehicles must be less than 9 mph (15 km/h), - the traffic must be flowing normally, - in the case of an over taking manoeuvre, if this is prolonged and the vehicle being over taken remains in the blind spot, - you are driving on a straight or lightly cur ved road, - your vehicle is not pulling a trailer, a
caravan...
- when over taking (or being over taken by) a very long vehicle (lorry, coach...) which is at the same time detected at the rear in the
blind spot angle and present in the driver's for ward field of vision, - in very heavy traffic: vehicles detected in front and behind are confused with a lorry or a stationary object, - when over taking quickly.

227Checks
Petrol engines
The various caps and covers allow access for checking the levels of the various fluids and for replacing cer tain components.
1. Power steering reser voir. 2. Screenwash and headlamp wash reser voir. 3. Coolant reser voir. 4. Brake fluid reser voir. 5. Battery/Fuses. 6. Fusebox. 7. Air filter. 8. Engine oil dipstick. 9. Engine oil filler cap.

Diesel engines
The various caps and covers allow access for checking the levels of the various fluids, for replacing cer tain components and for priming the fuel system.
1. Power steering reser voir. 2. Screenwash and headlamp wash reser voir. 3. Coolant reser voir. 4. Brake fluid reser voir. 5. Battery/Fuses. 6. Fusebox. 7. Air filter. 8. Engine oil dipstick. 9. Engine oil filler cap. 10. Priming pump * . 11. Bleed screw * .
* According to engine.

257Practical information
Changing a fuse
The extraction tweezer is fitted to a carrier clipped to the dashboard fusebox cover. For access to it:  open the glove box lid,  unclip the carrier on the fusebox cover by pulling on the right
Access to the tools
 remove the tweezer,  open the fusebox cover by pulling at top right,
 fold down completely the fusebox cover.
Changing foglamp bulbs
These bulbs are replaced from outside the rear bumper:  pass your hand under the bumper, turn the bulb holder a quarter turn and remove it, turn the bulb a quar ter turn, pull it out and fit a new bulb.
For reassembly, carry out these operations in reverse order.
Take care not to touch the silencer; there is a risk of burns if changing a bulb within a few minutes of switching off the ignition.

257Practical information
Changing a fuse
The extraction tweezer is fitted to a carrier clipped to the dashboard fusebox cover. For access to it:  open the glove box lid,  unclip the carrier on the fusebox cover by pulling on the right
Access to the tools
 remove the tweezer,  open the fusebox cover by pulling at top right,
 fold down completely the fusebox cover.
Changing foglamp bulbs
These bulbs are replaced from outside the rear bumper:  pass your hand under the bumper, turn the bulb holder a quarter turn and remove it, turn the bulb a quar ter turn, pull it out and fit a new bulb.
For reassembly, carry out these operations in reverse order.
Take care not to touch the silencer; there is a risk of burns if changing a bulb within a few minutes of switching off the ignition.

Installing electrical accessories
Your vehicle’s electrical system is designed to operate with standard or optional equipment. Before installing other electrical equipment or accessories on your vehicle, contact a CITROËN dealer or a qualified workshop.
CITROËN will not accept responsibility for the cost incurred in repairing your vehicle or for rectifying malfunctions resulting from the installation of accessories not supplied and not
recommended by CITROËN and not installed in accordance with its instructions, in par ticular when the combined consumption of all of the additional equipment connected exceeds 10 milliamperes.
Before changing a fuse:  the cause of the failure must be identified and rectified,  all electrical consumers must be switched off,  the vehicle must be immobilised with the ignition off,  identify the failed fuse using the tables and layout drawings in the following pages.
Changing a fuse
GoodFailed
The replacement of a fuse not shown in the tables below may cause a serious malfunction of your vehicle. Contact
a CITROËN dealer or a qualified workshop.
Tweezer To replace a fuse, you must:  use the special tweezer to extract the fuse from its housing and check the condition of its filament
 always replace the failed fuse with a fuse of the same rating (same colour); using a different rating could cause faults(risk of fire). If the fuse fails again soon after replacement, have the vehicle’s electrical system checked by
a CITROËN dealer or a qualified workshop.