2009 TOYOTA SEQUOIA Owners Manual

353
3-4. Using the hand
s-free phone system (for cellular phone)
3
Interior features
Speed dialing
Press .
Press the preset button in which the desired phone number is
registered.
Press .
When receiving a phone call■ Answering the phone
Press .
■ Refusing the call
Press .
Transferring a call
A call can be transferred between the cellular phone and system
while dialing, receiving a call, or conversing a call. Use one of the fol-
lowing methods: a. Operate the cellular phone.
Refer to the manual that comes with the cellular phone for the oper-
ation of the phone.
b. Press *1.
c. Press or and say “Call Transfer”
*2.
*1: This operation can be performed only when transferring a call from the cellular phone to the system during a call.
*2: While the vehicle is in motion , a call cannot be transferred from
the system to the cellular phone.

354 3-4. Using the hands-free phone system (for cellular phone)
Using a call history memory
Follow the procedure below to use a phone number stored in call his-
tory memory:
Press or and say “Redial” (when using a phone
number stored in the outgoing history memory) or “Callback”
(when using a phone number stored in the incoming history
memory).
Select the phone number by eit her of the following methods:
a. Say “Previous” or “Go back” until the desired phone num- ber is displayed.
b. Select the desired phone number by using .
The following operations can be performed: Dialing: Press or select “Dial” by using a voice command or
.
Storing the phone number in the phone book: Select “Store” by
using a voice command or .
Deleting: Select “Delete” by using a voice command or .

355
3-4. Using the hand
s-free phone system (for cellular phone)
3
Interior features
■A shortcut to Redial is available
Press the twice.
■ Muting your voice
Your voice can be muted so that the other party cannot hear your voice dur-
ing a call.
To set or cancel: Press or and say “Mute”.
■ Call history
Up to 5 phone numbers can be stored in each of the outgoing and incoming
history memories.
■ When talking on the phone
●Do not talk simultaneously with the other party.
● Keep the volume of the received voice down. Otherwise, voice echo will
increase.

356
3-4. Using the hands-free phone system (for cellular phone)
Setting a cellular phone
Registering a cellular phoneSelect “Pair phone” by using a voice command or , and do
the procedure for registering a cellular phone. ( P. 345)
Registering a cellular phone in the hands-free phone system allows
the system to function. The followin g function can be used for regis-
tered cellular phones:
■ Functions and operation procedures
To enter a menu for each function, follow the steps below by using
voice commands or :
●Registering a cellular phone
1. “Setup”  2. “Phone setup”  3. “Pair phone”
● Selecting a cellular phone to be used
1. “Setup”  2. “Phone setup”  3. “Select phone”
● Changing a registered name
1. “Setup”  2. “Phone setup”  3. “Change name”
● Listing the registered cellular phones
1. “Setup”  2. “Phone setup”  3. “List phones”
● Changing the passkey
1. “Setup”  2. “Phone setup”  3. “Set passkey”
● Deleting a cellular phone
1. “Setup”  2. “Phone setup”  3. “Delete”

357
3-4. Using the hand
s-free phone system (for cellular phone)
3
Interior features
Selecting a cellular phone to be used
Select “Select phone” by using a voice command or .
Pattern A Select a cellular phone to be used by either of the following
methods, and select “Confirm” by using a voice command or
:
a. Press or and say the desired phone name.
b. Press or and say “List phones”. While the name of the desired cellular phone is being read aloud,
press or .
Pattern B Select a cellular phone to be used by using .
Changing a registered name
Select “Change name” by using a voice command or .
Select a name of cellular phone to be changed by either of the
following methods:
a. Press or and say the desired phone name, and select “Confirm” by using a voice command or
.

358 3-4. Using the hands-free phone system (for cellular phone)
b. Press or and say “List phones”. While the
desired phone name is being read aloud, press or
.
c. Select the desired phone name by using .
Press or or select “(RECORD NAME)” by using , and say a new name.
Select “Confirm” by using a voice command or .
Listing the registered cellular phones
Select “List phones” by using a voice command or and the
system begins reading aloud the list of the registered cellular phones.
When listing is complete, the system returns to “Phone setup”.
Pressing or while a name of cellular phone is being read
selects the cellular phone, and the following functions will be avail-
able:
• Selecting a cellular phone: “Select phone”
• Changing a registered name: “Change name”
• Deleting a cellular phone: “Delete”

359
3-4. Using the hand
s-free phone system (for cellular phone)
3
Interior features
Changing the passkey
Select “Set passkey” by using a voice command or .
Pattern A
Press or , say a four to eight-digit number, and
select “Confirm” by using a voice command or .
Pattern B
Select a four to eight-digit number by using .
The number should be input one digit at a time.
When the entire number to be registered as a passkey has
been input, press once again.
Deleting a cellular phone
Select “Delete” by using a voice command or .
Pattern A Select a cellular phone to be deleted by either of the following
methods and select “Confirm” by using a voice command or
:
a. Press or and say the name of the desired cel- lular phone.

360 3-4. Using the hands-free phone system (for cellular phone)
b. Press or and say “List phones”. While the
name of the desired cellular phone is being read aloud,
press or .
Pattern B
Select a cellular phone to be deleted by using .
■The number of cellular phon es that can be registered
Up to 6 cellular phones can be registered in the system.