2009 RENAULT TWINGO Electrical Equipment - Radio R2-08 Workshop Manual

86A-65V1 MR-413-X44-86A150$130.mif
RADIO
Fault finding – Conformity check86A
R2-08
Vdiag No.: 64
FUNCTION: MULTIMEDIA
SUB-FUNCTION: USER SELECTION (continued)
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool.
The values shown in this conformity check are given as a guide.
Application condition: engine off, ignition on.
FunctionParameter or status
checked or actionDisplay and notes Fault finding
RadioAC013CD ejectionThis command is used for
testing CD ejection from
the CD player.In the event of an inconsistency,
contact the Techline.

86A-66V1 MR-413-X44-86A150$140.mif
86A
R2-08
Vdiag No.: 64
Tool status Diagnostic tool title
ET001Presence of another device
ET002Mode button
ET003Right directional button
ET004Left directional button
ET009CD eject button
ET010Radio preset button 1
ET011Radio preset button 2
ET012Radio preset button 3
ET013Radio preset button 4
ET014Radio preset button 5
ET015Radio preset button 6
ET034Rewind button
ET035Fast forward button
ET036Wheel press on/off
ET039TEL button
ET040SET button
ET043Wheel left turn
ET044Wheel right turn
ET057Activation signal
ET058Central wheel left turn
ET059Central wheel right turn
ET060Centre wheel press
ET062Text info button
ET063MEM button
ET064RADIO/CD button
ET065Activation request
RADIO
Fault finding – Status summary table

86A-67V1 MR-413-X44-86A150$150.mif
86A
R2-08
Vdiag No.: 64
Tool Parameter Diagnostic tool title
PR007FM1 radio field intensity
RADIO
Fault finding – Parameter summary table

86A-68
AFTER REPAIRRepeat the conformity check from the start.
V1 MR-413-X44-86A150$160.mif
86A
R2-08
Vdiag No.: 64
PR007FM1 RADIO FIELD INTENSITY
NOTESThe values shown in this conformity check are given as a guide.
Test conditions: Engine off, ignition on and radio on.
Perform the conformity check outside, in an area with good radio reception and
without obstacles.
Conformity check:
Monitor the PR007 value of the diagnostic tool data display.
Display of frequency received for the radio station currently set.
Radio field intensity parameterRadio reception level
(data display)
Outdoor testUnit: dBµV
Data interpretation:
Radio reception value Status
X > 18 dBµVCorrect radio reception
14 dBµV < X < 18 dBµVCorrect sound quality
RDS decoding (for example: display
of station names) correct
Automatic synchronisation / Presence
in the radio list
not satisfactory
10 dBµV < X < 14 dBµVCorrect sound quality
RDS decoding (for example: display
of station names) not satisfactory
Automatic synchronisation / Presence
in the radio list
not satisfactory
X > 10 dBµVRadio reception not satisfactory
If the fault is still present, contact the Techline.
R208_V64_PR007
RADIO
Fault finding – Interpretation of parameters

86A-69V1 MR-413-X44-86A150$170.mif
86A
R2-08
Vdiag No.: 64
Tool
commandDiagnostic tool title Description
RZ003:Fault memoryThis command is used for clearing the stored
faults from the computer.
AC004:Test right front speaker line
These commands are used to carry out
a listening test for each speaker.
NOTE:
These commands are not usable if the
anti- theft code is not entered. AC005:Front left-hand speaker lines test
AC006:Rear right-hand speaker lines test
AC007:Test left rear speaker line
AC010:Microphone testThis command is for testing microphone
operation.
NOTE:
Command AC010 is inactive if the auxiliary
source is selected.
Start by setting the radio to CD or radio
mode and run command AC010.
This command is not usable if the anti-theft
code is not entered.
AC013:CD ejectionThis command is used for testing CD ejection
from the CD player.
Set the radio to CD mode and run command
AC013.
SC002:Computer configuration See Configuration and Programming.
RADIO
Fault finding – Command summary table

86A-70V1 MR-413-X44-86A150$180.mif
86A
R2-08
Vdiag No.: 64
NOTESOnly refer to the customer complaints after performing a complete check using
the diagnostic tool.
NO DIALOGUE WITH THE COMPUTER ALP1
THE RADIO BEEPS EVERY 2 SECONDS ALP2
THE RADIO DOES NOT OPERATE WHEN THE ON BUTTON IS PRESSED ALP3
RADIO IS SWITCHED ON, BUT THE DISPLAY DOES NOT WORK ALP4
THE RADIO CONTROL SATELLITE DOES NOT OPERATE OR OPERATES POORLY ALP5
RADIO RECEPTION FAULT ALP6
THE VOLUME DOES NOT INCREASE WITH THE VEHICLE SPEED. ALP7
BACKLIGHTING DOES NOT CHANGE WHEN THE VEHICLE LIGHTS ARE
SWITCHED ONALP8
THE RADIO DOES NOT PLAY THE CD IN ORDER OR SKIPS SONGS ALP9
SOUND FAULT FOR A SPEAKER OR TWEETER (REGARDLESS OF SOURCE) ALP10
THE RADIO AND/OR THE DISPLAY REMAINS LIT FOR 1 MINUTE AFTER LOCKING THE
VEHICLE (ON NEW TWINGO ONLY)ALP11
THE CD DOES NOT EJECT ALP12
A RADIO BUTTON(S) NO LONGER OPERATES OR FUNCTIONS POORLY ALP 13
POOR SOUND (REGARDLESS OF THE SOURCE) ALP14
TELEPHONE COMMUNICATION IS POOR ALP15
VOICE RECOGNITION DOES NOT WORK OR DOES NOT WORK PROPERLY ALP16
PROBLEM PAIRING MY TELEPHONE TO THE RADIO ALP17
FAULT WHEN USING THE MOBILE CONNECTIVITY TERMINAL ALP18
RADIO
Fault finding – Customer complaints

86A-71
AFTER REPAIRWhen communication is established, deal with any faults indicated.
V1 MR-413-X44-86A150$190.mif
86A
R02-08
Vdiag No.: 64
ALP 1 No dialogue with the computer
NOTESTry to establish dialogue with a computer on another vehicle to check that the
diagnostic tool is not faulty. If the diagnostic tool is not causing the fault and dialogue
cannot be established with any other computer on the same vehicle, it may be that
a faulty computer is disrupting the fault finding line.
Use a process of successive disconnections to locate this computer.
Check the battery voltage, component code 107, and perform the necessary operations
to obtain the correct voltage (12 V < X < 15 V).
Ensure that the communication conditions are met: + After ignition feed activated
and radio On/Off button pressed.
Use the Wiring Diagrams Technical Note for Clio III or New Twingo.
For a vehicle equipped with a Navigation computer, use component 1714, Multimedia
connection unit, for fault finding on the Multimedia interface unit.
Otherwise use component 653, display computer.
Is the multimedia interface unit recognised
during the multiplex network test?The multimedia interface unit activates other
multimedia system computers.
Consult ALP 1 for the multimedia interface unit
(see 86D, Multimedia interface unit, Fault
finding chart).
Reconfigure the multimedia interface unit
(see 86D, Multimedia interface unit,
Configurations and Programming).
NO
YES
A
R208_V64_ALP1
RADIO
Fault finding – Fault Finding Chart

86A-72
AFTER REPAIRWhen communication is established, deal with any faults indicated.
V1 MR-413-X44-86A150$190.mif
RADIO
Fault finding – Fault Finding Chart86A
R01-08
Vdiag No.: 64
ALP 1
CONTINUED 1
Is a navigation computer present?
Is the navigation computer recognised during
the multiplex network test?
A
NOB
YES
NOB
YES
C