2009 Peugeot 206 P Dag ECO mode

FAMILIARISATION
I require ...
Manual air conditioning

Air distribution Air fl ow
Air recirculation/
Intake of exterior air
Temperature Manual A/C

HOT


COLD


DEMISTING
DE-ICING


Automatic air conditioning : favour use of the fully automatic mode by pressing the "AUTO" button.

Recommended interior settings
VENTILATION

23
MONOCHROME DISPLAY A Adjusting the parameters
Press and hold button 1 for two seconds
to access the settings; the data fl ashes,
indicating it is ready to be modifi ed.
Then, each press of button 1 scrolls
through the various data in the follow-
ing order:
- language of information displayed,
- hours (12 then 24 hour mode),
- minutes,
- year,
- month,
- day,
- unit of temperature (degrees Cel- sius or Fahrenheit).
Pressing button 2 allows modifi cation
of the data selected. Press and hold for
rapid advance (return to start after the
last possible value).
After 7 seconds with no action, the main
display returns; the modifi ed data are
now recorded.

Note: Pressing button 2 briefl y displays
the outside temperature for a few seconds.
When the outside temperature is be-
tween -3° and 3°C, the outside tempera-
ture display on the screen takes priority
over the clock display.
This displays the following information:
- the time,
- the date,
- the outside temperature * (this fl ashes
when it is between -3 and 3°C),
- the audio system displays,
- a door check (e.g.: ''left front door open''),
- warning messages (e.g. ''remote control battery fl at'') or information
messages (e.g. ''economy mode
active''), displayed temporarily.
* With automatic air conditioning only.

24
MONOCHROME DISPLAY B
This enables the following information
to be displayed:
- the time,
- the date,
- the outside temperature * (this fl ash-es when it is between -3 and 3 °C),
- the status of the doors. The display shows you, by means of a graphic,
whether a door is open,
- the warning messages (e.g. ''battery charge fault'') or information mes-
sages (e.g. "fuel level low''), dis-
played temporarily, can be cleared
by pressing button 1 or 2 ,
- the trip computer. Setting the parameters
Press button
1 for two seconds to ac-
cess the settings. The information fl ashes
to show it is ready to be modifi ed.
Then, individual presses on button 1
allow you to scroll through the various
data in the following sequence:
- language in which the information is displayed,
- unit of distance (kms or miles),
- unit of temperature (degrees Cel- sius or Fahrenheit),
- time format (12 then 24 hour mode),
- hour,
- minutes,
- year,
- month,
- day.
Pressing button 2 allows you to change
the information selected. Maintain the
pressure for rapid scrolling.
After 7 seconds without operation, the
screen returns to the normal display
and the modifi ed data is recorded.
* With automatic air conditioning only.

28
MANUAL AIR CONDITIONING
The air conditioning system can only operate when the engine is running.
1. Temperature adjustment

 Turn the dial from blue (cold) to red
(hot) to adjust the temperature to
suit your requirements.
2. Air fl ow adjustment 3. Air distribution adjustment 4. Air intake/Air recirculation
Windscreen and side windows.
Windscreen, side windows and
footwells.
Footwells.
These settings are recommended for
cold climates. Central and side vents.
This setting is recommended for hot
climates.

 Move the manual control to
the left to return to the "Ex-
terior air intake" position.
The intake of exterior air prevents the
formation of condensation on the wind-
screen and side windows.
The recirculation of interior air prevents
exterior odours and smoke from enter-
ing the passenger compartment.
Used simultaneously with the air condi-
tioning, the air recirculation improves its
performance.
Used in a damp climate, the air recircu-
lation may cause condensation to form
on the windows.
Return to exterior air intake mode as
soon as possible to avoid deterioration
of the air quality and prevent condensa-
tion.
 Move the manual control to
the right to the "Interior air
recirculation" position.

 Turn the dial from position 1
to position 4 to obtain an
air fl ow suffi cient to ensure
your comfort.

 If you place the air fl ow control in po-
sition OFF (deactivation of the sys-
tem), the temperature is no longer
maintained at a comfortable level.
However, a slight fl ow of air, due to
the movement of the vehicle, can
still be felt.

30
AUTOMATIC AIR CONDITIONING
1. Automatic comfort programme
Automatic operation
2. Temperature adjustment
The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit.
3. Automatic visibility programme
The automatic comfort programme may
not be suffi cient to quickly demist or de-
ice the windscreen and side windows
(humidity, several passengers, ice...).
This system is designed to operate
effectively in all seasons, with the
windows closed.
When the engine is cold, to prevent
too great a distribution of cold air, the
air fl ow will only reach its optimum level
gradually.
In cold weather, it favours the distribu-
tion of warm air to the windscreen, the
side windows and the footwells only.
The air conditioning can only operate with the engine ru
nning.

 Press the "AUTO" button.
The "AUTO" symbol is dis-
played.
 Press the arrows 1 (up and
down) to change this value.
A setting around 21 enables
you to obtain an optimum level
of comfort. Depending on your require-
ments, a setting between 18 and 24 is
usual.
On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfort value, there is no need
to alter the value displayed in order to
obtain the required level of comfort. The
system eliminates the temperature dif-
ference automatically and as quickly as
possible.

 In this case, select the auto-
matic visibility programme.
The system automatically con-
trols the air conditioning, the
air fl ow and the air intake and provides
optimum distribution of the ventilation to
the windscreen and side windows.

 To exit this programme, press the

"AUTO" button again.
We recommend that you use this
mode: it provides optimised automatic
control of all of the functions, passenger
compartment temperature, air fl ow, air
distribution and air recirculation, in
accordance with the comfort value that
you have selected.

!
!
31
Resuming manual control
Depending on your requirements, you
can make a different selection from that
offered by the system by changing a
setting. The other functions will still be
controlled automatically.

 Press the "AUTO" button to return
to fully automatic operation.
4. Air conditioning On/Off
5. Air distribution adjustment 6. Air fl ow adjustment
7. Air intake/Air recirculation
Deactivation of the system
Avoid prolonged operation in inte-
rior air recirculation mode (risk of
condensation and of deterioration
of the air quality).
Avoid driving for too long with the
air conditioning deactivated.

 Press this button to switch
the air conditioning off.
The "ECO" symbol is dis-
played.
Switching the system off may result in
discomfort (humidity, condensation).

 Press the button again to return to
automatic operation of the air con-
ditioning. The symbol " A/C " is dis-
played.

 Press this button several
times in succession to direct
the air fl ow in turn towards:
- the windscreen and side windows (demisting or de-icing),
- the windscreen, the side windows and the footwells,
- the footwells,
- the central vents, the side vents and the footwells,
- the central and side vents.
 Press the "-" but-
ton to reduce the air
fl ow.

 Press the "+" button
to increase the air
fl ow.

 Press this button to recircu-
late the interior air. The air
recirculation symbol is dis-
played.
Air recirculation prevents exterior odours
and smoke from entering the passenger
compartment.
Favour this position for rapid cooling of
the passenger compartment.

 As soon as possible, press this but-
ton again to permit the intake of ex-
terior air and prevent condensation.
 Press the "OFF" button.
This action deactivates all of the func-
tions of the air conditioning system.
The temperature is no longer main-
tained at a comfortable level. However,
a slight fl ow of air, due to the movement
of the vehicle, can still be felt.

 Press the "OFF" , "AUTO" or "visi-
bility" button again to reactivate the
system with the values which were
set before it was deactivated.

i
4343
WINDOW MECHANISMS
System which opens or closes a window
manually or automatically. Electric windows

 Press or pull the switch. The window
stops as soon as the switch is re-
leased.
One-touch electric windows
There are two methods of operation:
- manual mode

 Press or pull the switch gently.
The window stops as soon as the
switch is released.
- automatic mode

 Press or pull the switch fully. The
window opens or closes complete-
ly when the switch is released.

 Pressing the switch again stops
the movement of the window.
REAR QUARTER WINDOWS
On the 3-door versions, system for ven-
tilation of the rear seats limiting the par-
tial opening of the window.
Opening

 Tilt the lever outwards.

 Push the window to open it.
Closing

 Pull the lever to close the window.

 Tilt the lever fully inwards to secure
the window in the closed position.

1. Driver's electric window switch.

2. Passenger's electric window
switch.
The electric window switches re-
main operational for approximately
45 seconds after the ignition is
switched off or until a front door is
opened.

i
51
Automatic windscreen wipers
In the AUTO position, the windscreen
wipers operate automatically and adapt
their speed to the intensity of the
rainfall .
Operating check

Activation
Activation of the function is accompa-
nied by a message on the multi-function
display.

In the event of malfunction , the driver
is informed by an audible signal.
In the AUTO position, the windscreen
wiper will operate in intermittent mode.
Contact a PEUGEOT dealer to have the
system checked.
Do not cover the rain sensor located on
the windscreen behind the interior mirror.
When using an automatic car wash,
switch off the ignition or check that the
wiper stalk is not in the AUTO position.
In winter, it is advisable to wait for the
windscreen to completely clear of ice
before operating the automatic wipe.

Windscreen wash
Pull the wiper stalk towards you. The
windscreen wash, then the windscreen
wipers, operate for a specifi ed time. Rear screen wiper
Turn ring
A to the fi rst notch for intermit-
tent wiping.

If the ignition is switched off, it is
necessary to reactivate the control
each time . To do this, move the stalk
to any position, then move it back to the
required position.
Automatic rear screen wiper
When the windscreen wipers control is
activated and you engage reverse gear,
the rear screen wiper operates intermit-
tently.
Rear screen wash
Turn ring A past the fi rst notch; the
screen wash then the wiper operate for
a fi xed period. If you use a bicycle carrier, con-
sult a PEUGEOT dealer to have
this function deactivated or install
a specifi c bicycle carrier approved
by PEUGEOT.
COURTESY LIGHTS
System for selecting and controlling the
various passenger compartment lights.
Front courtesy light (button A)
- when the vehicle is unlocked,
- when a door is opened,
- when the ignition is switched off.
It switches off when the vehicle is
locked.
It fl ashes while driving if a door is not
closed correctly.
Permanently off.
Permanently on, when the key
is in the accessories position or
with the ignition on.
In this position, the courtesy
light comes on for approximately
30 seconds: