Page 33 of 234
Locks, doors, windows33
Additional switches are located in the front
passenger’s door and the rear doors.
The rear windows do not open fully.Safety function
3
If the window glass encounters resistance
above the middle of the window during
automatic closing, it will stop immediately
and will be opened again.
In the event of difficulty due to frost or the
like, press the releva nt window switch
several times until the window is closed.
Child safety system for rear windows
Press z switch in driver’s door to lock rear
window operation.
With the lock on, rear passenger windows
can only be operated via the switches in
the driver’s door.
Page 34 of 234

Locks, doors, windows34
Sun visors
Use the sun visor to protect from glare by
pulling it up, down or swivelling it to the
side.
Sun visors have vanity mirrors and a ticket
holder 3 on the rear.
When the vanity mirror covers are opened,
the sun visor lamp 3 will illuminate.
Slide/tilt sun roof 3
Operated via switch in roof lining when the
ignition switch is in positions ACC or ON.
With key in LOCK position in the ignition
switch or removed, the slide/tilt sun roof
can be adjusted for up to 10 minutes or
until a door is opened.
For incremental operation, briefly press the
button. For automatic opening or closing,
press and hold the switch. To open
Press switch rearwards; it will open
automatically unless th
e switch is pressed
again in another dire ction, or released.
To close
Press and hold switch forwards. Release
switch when sun roof reaches desired
position.
To tilt
Press and hold switch upwards. Release
switch when sun roof reaches desired
position.
To return sun roof to its original position,
press and hold switch downwards. Release
switch when sun roof reaches desired
position.
Page 35 of 234
Locks, doors, windows 35
Note
zIf the top of the sun roof is wet, tilt it to
allow water to run off before opening the
sun roof.
z When carrying a roof load, check the
clearance of the sun roof, to avoid
damage.
9 Warning
Care must be taken when operating the
sun roof. Do not place any objects or
body parts in the sun roof opening.
Keep sun roof clear of debris. Do not
place heavy objects on or around
sun roof.
When leaving the vehicle unattended,
ensure the sun roof is fully closed.
Page 36 of 234

Seats, interior36
Seats, interior
Front seats
Adjust seat longitudinally
To adjust, pull the handle on the front seat,
slide the seat and release the handle. Adjusting front seat backrests
To adjust, lift the release lever, move seat
backrest to suit seatin
g position and lock in
position when the lever is released.
Do not lean on the seat backrest whilst
adjusting it.
Front seats .......................................... 36
Rear seats............................................ 41
Seat belts............................................. 42
Child restraint systems
3................... 47
Airbag systems ................................... 52
Storage ................................................ 59
Drink holders ....................................... 67
Ashtrays 3........................................... 67
Warning triangle ¨ 3 ,
First aid kit +3................................ 68
Power outlets ...................................... 68
Assist grips .......................................... 69
9 Warning
Never adjust seats wh ilst driving as they
could move uncontrollably.
Page 37 of 234
Seats, interior37
Adjusting the lumbar support 3
To adjust, turn the handwheel whilst
relieving the load on the backrest.
Adjust lumbar support to suit personal
requirements. Adjusting seat height
3
To adjust, operate lever on side of seat.
Lever pumping action Electrically adju
stable front seat 3
upward: raises seat
downward: lowers seat
9 Warning
Care must be taken when operating
electrically adjustable seats. There is a
risk of injury, partic ularly for children and
a danger that articles could become
trapped.
Keep a close watch on the seats when
adjusting them.
Vehicle passengers must be informed
accordingly.
Page 38 of 234

Seats, interior38
AdjustmentThe seat position can be adjusted by
means of switches on the outboard side of
the seat.
Adjusting the longitudinal position:
Move front switch forwards/backwards.
Height adjustment:
To adjust height of front part of seat
cushion, push front part of switch up/down.
To adjust height of rear part of seat
cushion, push rear part of switch up/down.
To adjust height of entire seat cushion,
push both front and re ar parts of switch
up/down. Seat backrest adjustment:
Move upper part of rear switch forwards/
backwards.
Operate switch until desired seat position is
reached. Seat position - see next column.
After adjusting the seat, adjust height of
seat belt - see page 47.
The seat backrest must not be tilted back
too far (recommended maximum tilting
angle approx. 25°).Seat position
Adjust driver’s seat such that, with the
driver sitting upright,
the steering wheel is
held in the area of its upper spokes with the
driver’s arms slightly bent.
Slide front passenger’s seat as far back as
it will go.
The seat backrests must not be tilted back
too far (recommended maximum tilting
angle approx. 25°).
9 Warning
Disregard can lead to injuries which could
be fatal. Vehicle passengers must be
informed accordingly.
Page 39 of 234

Seats, interior39
Head restraints
To adjust head restraint height, press
release button, adjust height to suit then
release the button.
Pull head restraint up to raise. Push head
restraint down while pressing the release
button to lower the head restraint. Activ
e head restraints 3In the event of a re
ar-end impact, the
active head restraints automatically tilt
forwards. The head is more effectively
supported by the head restraint and the
danger of hyperextension in the area of the
cervical vertebra is reduced.
Do not attach objects or components that
are not approved for your vehicle to the
head restraints. These affect the protective
effect of the head re straints and can be
propelled through the vehicle in an
uncontrolled manner if the driver brakes
hard or an accident occurs.
Head restraint position
For maximum protection, the middle of the
head restraint should be at eye level. If this
is not possible for extremely tall persons,
set to highest position, and set to lowest
position for extremely small persons.
9 Warning
Disregard can lead to injuries which could
be fatal. Vehicle passengers must be
informed accordingly before moving
away.
Page 40 of 234
Seats, interior40
Removing the head restraintsInsert a suitable tool into the small hole in
the side of the guide sleeve without the
release button and depress the lock. Press
the release button on the other guide
sleeve and pull up the head restraint.
Stow head restraints securely in luggage
compartment.
Front seat armrest 3
The armrest can be slid forwards. Pull up
and hold upper lever and slide the armrest
forwards.
To return armrest to its rearmost position,
slide it back until it latches into position.
Console box in front armrest - see page 65. Folding down the passenger’s seat
3
Push front passenger’s seat head restraint
all the way down - see page 39.
Slide front passenger’s seat as far back as
it will go.
Fold seat forwards by lifting backrest
release lever and folding backrest down
onto seat cushion.