2009 MERCEDES-BENZ E-CLASS COUPE key

Memory functions*
Storing settings
Using the memory button you can store up to
three different settings, e. g. for three differ-
ent people.
The following settings are stored as asingle
memory preset:
R position of the seat, backrest and head
restraint
R driver's side :steering whee lposition
R driver's side :position of the exterior mir-
rors on the driver's and front-passenger
sides G
Risk of injury
The memory function can still be use dwhen
the key has been removed .For this reason,
children should never be left unsupervised in
the vehicle. Otherwise, they coul dbecome
trappe dwhen moving the seat or the steering
wheel. G
Risk of accident
Only use the memory function on the driver's
side when the vehicl eisstationary. Other-
wise, you coul dbedistracted from the traffic
conditions by the steering whee land seat
moving of their own accord, and as aresult
caus eana ccident. X
Adjust the seat( Ypage6 6).
X On the driver's side ,alsoa djust the steer-
ing whee l(Y page7 1) and the mirrors
(Y page7 3).
X Press memory button Mand press storage
position switch 1,2or 3withi nthree sec-
onds.
The settings are stored in the selected pre-
set position. Atone sound swhen the set-
tings have been completed. Calling up
astored setting
X Press the corresponding storage position
button 1,2or 3.
The seat, steering whee land exterior mirror
are set in the stored position.
i The setting procedure is interrupted as
soon as you release the storage position
switch. Parking position for the exterior mir-
ror on the front-passengers
ide*
To make it easier to park, you can set and
store the front-passenge rside exterior mirror
position in such awaythat you can see the
rear whee lonthat side as soon as you engage
reverse gear.
Setting and storing the parking position Memory functions*
75Controls
*o
ptional
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 75 Z

X
Make sure that the vehicle is stationary and
that the key is in position 2in the ignition
lock.
X Press button 0047for the exterior mirror on
the front-passenger side.
X Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X Use adjustment button 008Ato adjust the
exterior mirror to aposition which allows
you to see the rear wheel and the kerb.
The parking position is stored.
i If you shift the automatic transmission
into another gear, the exterior mirror on the
front-passenger side returns to the driving
position.
i You can also store the parking position
using the memory button M0088:
X With the key in position 2in the igni-
tion lock and with the exterior mirror
on the front-passenger side activated,
use adjustment button 008Ato set the
exterior mirror such that the rear
wheel and kerb are visible.
X Press memory button M0088 and one of
the arrows on adjustment button 008A
within three seconds.
The parking position is stored if the
exterior mirror does not move.
If the mirror moves out of position, repeat
the steps.
Calling up the parking position X
When the key is in position 2in the ignition
lock and the exterior mirror on the front-
passenger side is activated, engage
reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger
side moves back to its original position: R
as soon as you exceed aspeed of
10 km/h
R about ten seconds after you have disen-
gaged reverse gear
R if you press button 0046for the exterior mir-
ror on the driver's side Seat belts
Wearing seat belts
Seat belts are the most effective means of
restraining the movement of vehicle occu-
pants in the event of an accident. This
reduces the risk of vehicle occupants coming
into contact with the vehicle interior. G
Risk of injury
As eat belt which is not worn correctly, or
which has not been engaged in the seat belt
buckle correctly, cannot perform its intended
protective function. Under certain circum-
stances, this could result in severe or even
fatal injuries.
Make sure that all occupants –inparticular,
pregnant women –wear their seat belt cor-
rectly at all times.
R The seat belt must fit snugly on your body
and must not be twisted. Therefore, you
should avoid wearing bulky clothing (e.g. a
winter coat). The shoulder belt section
must be routed across the centre of your
shoulder –onnoaccount across your neck
or under your arm –and pulled tight against
your upper body. The lap belt must always
pass across your lap as low down as possi-
ble, i.e. over your hip joints–n ot across
your abdomen. If necessary, push down the
belt strap slightly and then retighten it in
the roll-up direction.
R Do not route the belt strap across sharp
edges or fragile objects, especially if these
are located on or in your clothing, e.g. spec-
tacles, pens, keys, etc. The seat belt strap
could be damaged and tear in an accident, 76
Seat beltsControls
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 76

and you or other vehicle occupant
scould
be injured.
R Only on eperson shoul duse each seat belt
at any on etime. Children must never travel
sittin gont helap of other occupants. It
would no tbepossible to restrain th echild
in th eeven tofas udden chang eindirec-
tion, braking or an accident. This could
result in severe or even fatal injuries to the
child and other occupants.
R Person sless than 1.50 mtall canno twear
th es eat belt scorrectly. For this reason,
secure person sless than 1.50 mtall in spe-
cially designed ,suitable restraint systems.
R Children less than 1.50 mtall or under
12 years of age canno twear th eseat belts
properly. Therefore, they always shoul dbe
secured in asuitable child restraint system
on asuitable vehicle seat .You can find
mor einformatio nunde r"Children in the
vehicle "inthe"Safety" sectio noftheOwn-
er' sM anual. Follow th emanufacturer's
installatio ninstruction swhen fittin gthe
child restraint system.
R Do no tsecure any object swithaseat belt
if th eseat belt is also bein gused by on eof
th ev ehicle's occupants. G
Ris
kofi njury
The seat belt does no toffer th eintended level
of protection unless th ebackres tisalmost
vertical. Under certain circumstances, this
coul dresult in severe or even fatal injuries.
Before starting ajou rney, mak esure that the
seat is properly adjuste dand that th eback-
res tisa lmostvertical. G
Ris
kofi njury
Ad irtyord amage dseat belt or aseat belt that
has been subjected to aload in an accident
or whic hhas been modified no longer offers
th ei ntended leve lofprotection .Under certain
circumstances, this coul dresult in severe or
even fatal injuries. For this reason
,che ck regularly that th eseat
belt sare no tdamage dordirty.
Always have damage dseat belt sorseat belts
that have been subjected to aload in an acci-
den treplaced at aqualified specialist work-
shop .Consult aqualified specialist workshop
whic hhas th enecessar yspecialist knowledge
and tools to carry out th ework required.
Mercedes-Ben zrecommend sthaty ou use a
Mercedes-Ben zServic eCentre for this pur-
pose.
For safety reasons, Mercedes-Ben zrecom-
mends that you only use seat belt swhichhave
been approved by Mercedes-Ben zfor your
vehicle.
The seat-belt extender for th edriver and front
passenger helps you fasten your seat belt. Example
:Coupé
Seat-belt extender 0046is extended when the
respectiv edoor is closed and th ekeyis
turned to position 1or 2in th eignition lock.
Seat-belt extender 0046is retracte dagain if:
R theb elt tongue is engaged in th eseat belt
buckle.
R theb elt tongue is no tengaged in th eseat
belt buckle within 60 seconds.
R ther espectiv edoor is opened.
R thek eyis turned to position 0in th eignition
lock. Seat belts
77Controls
207_AKB;2;3,en-GB
mkalafa, Version:2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 77 Z

Seat-belt adjustment
The belt adjustment function adjusts the driv-
er's and front-passenger seat belt to the
upper body of the occupants. The belt strap
is tightened slightly when:
R you engage the belt tongue in the buckle
and then turn the key to position 2in the
ignition lock.
R the key is in position 2in the ignition lock
and you then engage the belt tongue in the
buckle once the seat-belt extender has
retracted.
The seat-belt adjustment will apply acertain
tightening force if any slack is detected
between the occupant and the belt sash. The
belt should not be held during the adjust-
ment.Y ou can switch the belt adjustment on
and off in the on-board computer
(Y page 121).
Unfastening the belt X
Press release button 0088and guide belt
tongue 0047back towards seat-belt
extender 0046. Belt warning for driver and front
passenger
The 0082 seat belt warning lamp in the instru-
ment cluster reminds you that all occupants
should fasten their seat belts. It is either lit
continuously or flashes. Additionally, there
may be awarning tone.
The 0082 seat belt warning lamp goes out and
the warning tone ceases as soon as the driver
and front passenger have fastened their seat
belts.
For certain countries only: regardless of
whether the driver or the front passenger
already have their seat belt fastened, the
0082 seat belt warning lamp lights up for six
seconds after the engine has been started. It
then goes out if both the driver and the front
passenger have fastened their seat belt. i
Further information about the 0082seat
belt warning lamp (Y page 236). Rear seat belt status indicator
The rear-compartment seat belt status indi-
cator tells you if the rear passengers have
their seat belts fastened. It indicates the rear
seat on which the belt is fastened.
The rear-compartment seat belt status indi-
cator appears in the multi-function display for
around 30 seconds if
R you set off and have reached aspeed of
approximately 10 km/h.
R the rear passengers fasten or unfasten
their seat belts while the vehicle is in
motion.
R someone gets in or out of the vehicle and
the vehicle drives away again. Example: the passenger in the right rear seat has
their seat belt fastened
You can also cancel the messages immedi-
ately (Y
page 208).
i The status indicator for the rear-compart-
ment seat belts is only available for certain
countries. Seat belts
79Controls
207_AKB; 2; 3, en-GB
mkalafa, Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 79 Z

tries
,ope ratio noft he headlamps varies due
to lega lrequirements and self-impose dobli-
gations. In these countries ,the daytime driv-
ing lights ar eautomaticall yswitched on when
the engine is started.
Th ee xterior lighting (excep tthe side lamp/
parking lamp) switches off automaticall yif
you:
R remove the key fro mthe ignition lock
R open the driver's door when the ignition is
switched off (ke yinposition 0in the igni-
tio nlock)
! Switch off the side lamps and parking
lamp when yo uleave the vehicle. This pre-
vents the battery fro mdischarging.
Informatio nabout drivin gabroad Converting to symmetrica
ldipped beam
when drivin gabroad: switch the headlamps
to symmetrical dipped beam in countries in
which traffi cdrives on the opposite side of the roa
dtot he country where the vehicl eisreg-
istered. This prevents oncoming traffi cfrom
being dazzled.
Have the headlamps converte dataqualified
specialis tworkshop ,e.g.aM ercedes-Benz
Service Centre, as close to the borde raspos-
sibl ebefor ed riving in these countries .Sym-
metrica llight sdon ot illuminate as large an
area of the edge of the carriageway.
Converting to asymmetrica ldipped beam
afte rreturning: have the headlamps conver-
ted back to asymmetrica ldippe dbeamata
qualifie dspecialis tworkshop ,e.g.a
Mercedes-Benz Service Centre, as soon as
possibl eafter crossing the borde rwhen
returning.
Vehicle swithI ntelligent Light System*: if
the headlamps ar econverte dtosymmetrical
dipped beam ,not al llight functions ar eavail-
able ."Mo torway mode" and the "extended
range foglamps "aredeactivated
(Y page 119). Operation
Light switch
004A
006F
Left-hand parking lamp 004B
0070
Right-hand parking lamp 004C
0027
Lights off/daytime driving
lights Operation
004D
0066
Automatic headlamp mode/
daytime driving lights 004E
006C
Sidelam ps,licence plate and
instrument lighting 004F
0064
Dipped-bea mheadlam ps/
main-bea mheadlam ps18 18
Youm usts witch on the dipped-beam headlamps befor eyou can switch on the main-bea mheadlam ps. Lights
81Controls
*optional
207_AKB; 2; 3, en-GB
mkalafa
,V ersion: 2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 81 Z

Operation
0050
0066
Frontfoglamps 19 0051
006A
Rear foglamp Combination switch
0070
0063
Main-beam headlamps 180071
0024
Right-han dturn signal 0072
Headlamp flasher
0073
0026
Left-hand turn signal Dipped-beam headlamps
X
Turn the ignition key to position 2in the
ignition lock or start the engine.
X To switch on: turn the light switch to
0064.
The 0064 indicator lamp in the instrument
cluster lights up.
Daytim edriving lights X
Activat ethe daytime driving lights function
via the on-board computer (Y page 119).
X To switch on: turn the light switch to
0027 or0066.
When the engine is on: depending on the
ambient light conditions, the daytime driv-
ing lights or the dipped-beam headlamps
are switched on.
When the dipped-beam headlamps are
switched on, the 0064indicator lamp in the
instrument cluster lights up.
Automatic headlamp mode G
Risk of accident
If the light switch is set to 0066,the lights will
not come on automatically if it is foggy. This
could endanger you and others .Therefore, turn the light switch to
0064in the dark or in
fog.
The automatic headlamp feature is only an
aid. The driver is responsible for the vehicle's
lighting at all times. G
Risk of accident
When it is dark or foggy, turn the light switch
from 0066 to0064 in good time. Otherwise,
the headlamps could switch off temporarily
and you could cause an accident.
X To switch on: turn the light switch to
0066.
Key in position 1in the ignition lock: the
side lamp is switched on or off automati-
cally depending on the brightness of the
ambient light.
When the engine is running: depending on
the ambient light conditions, the daytime
driving lights 20
or the dipped-beam head-
lamps (in addition to the side lamp) are
switched on or off automatically.
When the dipped-beam headlamps are
switched on, the 0064indicator lamp in the
instrument cluster lights up.
Foglamps (halogen headlamps) G
Risk of accident
If you suspect that driving conditions will be
foggy, turn the light switch to 0064before you
start your journey. Otherwise, your vehicle
may not be visible and you could endanger
yourself and others.
X Turn the key to position 2in the ignition
lock.
X To switch on: turn the light switch to
0064 or006C.Ift he light switch is set to
0066,y ou cannot switch on the foglamp.
19 Only vehicles with halogen headlamps are equipped with fron tfoglamps.
18 You must switch on the dipped-beam headlamps before you can switch on the main-beam headlamps.
20 If you have activated the "Daytime driving lights" function in the on-board computer. 82
LightsControls
207_AKB; 2; 3, en-GB
mkalafa,
Version:2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 82

X
Pull the light switch out to the first detent.
The green 0066indicator lamp in the instru-
ment cluster lights up.
X To switch off: press the light switch in as
far as it will go.
The green 0066indicator lamp in the instru-
ment cluster goes out.
Rear foglamp On vehicles with front foglamps
X
Turn the key to position 2in the ignition
lock.
X To switch on: turn the light switch to
0064 or006C.W hen the light switch is set
to 0066,y ou cannot switch on the rear fog-
lamp.
X Pull the light switch out to the secon dstop.
The yellow 006Aindicator lamp in the
instrument cluster lights up.
X To switch off: press the light switch in as
far as it will go.
The yellow 006Aindicator lamp in the
instrument cluster goes out.
On vehicles without front foglamps
X Turn the key to position 2in the ignition
lock.
X To switch on: turn the light switch to
0064.W hen the light switch is set to
0066,y ou cannot switch on the rear fog-
lamp.
X Pull the light switch out to the stop.
The yellow 006Aindicator lamp in the
instrument cluster lights up.
X To switch off: press the light switch in as
far as it will go.
The yellow 006Aindicator lamp in the
instrument cluster goes out.
Manua lmain-beam headlamps X
Turn the ignition key to position 2in the
ignition lock or start the engine.
X To switch on: turn the light switch to
0064. X
Press the combination switch beyond the
pressure point in the direction of arrow
0070 (Ypage 82).
The 0063 indicator lamp in the instrument
cluster lights up.
X To deactivate: move the combination
switch back to its normal position.
The 0063 indicator lamp in the instrument
cluster goes out.
Adaptive Highbeam Assist* You can use this function to set the head-
lamps to change between dipped-beam and
main-beam automatically. The system recog-
nises vehicles with their lights on, either
approaching from the opposite direction or
travelling in frontofy
our vehicle, and conse-
quently switches the headlamps from main
beam to dipped beam.
The system automatically adapts the dipped-
beam headlamp range depending on the dis-
tancetot he other vehicle. When the system
no longer detect sany other vehicles it acti-
vates the main-beam headlamps again.
The optical sensor for the system is behind
the windscreen in the overhead control panel
area. Lights
83Controls
*optional
207_AKB; 2; 3, en-GB
mkalafa,
Version: 2.11.8.1 2009-07-23T10:23:49+02:00-Seite 83 Z

Exterio
rlighting (Cabriolet)
Notes on th eexterio rlighting For reason
sofsafety, Mercedes-Ben zrecom-
mends that you driv ewith th elight sswitched
on even durin gthe daytime. In som ecoun-
tries, operatio noftheheadlamps varies due
to legal requirements and self-impose dobli-
gations. In these countries, th edaytime driv-
ing light sare automatically switched on when
th ee ngineiss tarted.
The exterio rlighting (excep tthe side lamp/
parking lamp) switches off automatically if
you:
R remove th ekeyfrom th eignition lock
R open th edriver' sdoor when th eignition is
switched off (ke yinposition 0in th eigni-
tio nlock)
! Switch off th eside lamps and parking
lamp when you leave th evehicle .This pre-
vents th ebattery from discharging.
Information abou tdriving abroad Convertin
gtosymmetrica ldipped beam
when driving abroad: switch theheadlamps
to symmetrical dipped beam in countries in whic
htraffic drives on th eopposite side of the
road to th ecountr ywherethe vehicle is reg-
istered .This prevents oncoming traffic from
bein gdazzled.
Hav ethe headlamps converte dataqualified
specialist workshop ,e.g.aM ercedes-Benz
Servic eCentre, as close to th eborder as pos-
sible before driving in these countries. Sym-
metrical light sdonotilluminate as large an
area of th eedge of th ecarriageway.
Convertin gtoasymmetrical dipped beam
after returning: have theheadlamps conver-
te db ack to asymmetrical dipped beam at a
qualifie dspecialist workshop ,e.g.a
Mercedes-Ben zServic eCentre, as soon as
possible after crossing th eborder when
returning.
Vehicles with Intelligent Light System*: if
th eh eadlamps are converte dtosymmetrical
dipped beam, no tall light function sare avail-
able. "Motorway mode "and th e"extended
range foglamps "are deactivated
(Y page 119). Operation
Light switch
004A
006F
Left-han dparking lamp 004B
0070
Right-hand parking lamp Operation
004C
006C
Sidelamps ,licenc eplatea nd
instrumen tlighting 004D
0066
Automatic headlam pmode/
daytime driving lights Lights
87Controls
*optional
207_AKB
;2;3,en-GB
mkalafa, Version:2.11.8.1
2009-07-23T10:23:49+02:00
-Seite 87 Z