2009 MERCEDES-BENZ CL COUPE lock

X
To save the setting: pressW.
X To exit the menu: slideXVY. Interactive content
DVDs can contain interactive content (e.g. a
video game). In a video game, you may be able
to influence events by selecting and trigger-
ing actions. The type and number of actions
depend on the DVD.
X To select an action: slideZVÆ orXVY .
X To trigger an action: pressW. TV*
General notes
The TV tuner is designed to receive analogue
terrestrial TV channels (all standards) and
digital TV channels conforming to the DVB-T
standard 8
.
Automatic picture shutoff If the vehicle is travelling faster than approx-
imately 6 km/h, the picture and teletext in TV
mode on the driver's side automatically
switch off. The following message appears in
the display:
In order not to distract
the driver, the picture is faded out
while the vehicle is in motion . As
soon as the vehicle speed drops below about
3 km/h, the picture switches back on again.
Switching off the picture and sound The constantly changing reception conditions
while the vehicle is in motion can interrupt the
signal. If the reception is too poor, COMAND
may switch off the sound and freeze or hide
the picture. In this case, you will see the
respective symbol in the display. TV menu overview
The following menus are available:
R TV Q Station, Save station, Channel
input, Brightness, Contrast, Colour, Auto,
16:9 optimised, 4:3, Widescreen, Channel
fix, TV standard, Audio 1, Audio 2
R Memory QAutostore, Channel preset list
R Info QInformation on current programme
(digital stations only)
R Teletext QSwitch on teletext
R Sound QTrebles, basses, balance/fader,
surround sound* Switching to TV mode
X Select VideoQTV. Hiding or showing the control menu
X To show: slideZVÆ.
X To hide: slideZVÆ.
or
X Wait for approximately eight seconds. Control menu displayed
:
Selected TV channel
; Current programme (digital TV receiver
only)
= Next station
? Current programme on the next TV chan-
nel in the list (digital TV receiver only)
8 DVB-T may not be available in some countries, or may not be available in all areas. TV*
89COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7
2009-02-27T14:54:17+01:00 - Seite 89 Z
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:15:02; WK

A
To show the menu system
B Current programme on the previous TV
channel in the list (digital TV receiver only)
C Previous TV channel in the list Hiding/showing the menu system
X To show: pressW.
X To hide: pressWwhen the main area is
selected. Menu system displayed
:
Main area
; Sound settings
= To switch on teletext
? Information on the current programme
(only for digital TV channels)
A Channel preset list
B TV options Selecting TV channels
Selecting channels from the control
menu X
If the menu system is hidden (Y page 90),
slide XVY or turn cVd.
The navigation menu appears and
COMAND skips to the previous or
next channel in the channel list.
You can also select the station using the
9 or: button on the multi-function
steering wheel. X
To make a selection from the list of all
channels: press and hold the 9
or : button.
X To make a selection from the list of
stored channels: briefly press the 9
or : button.
Selecting channels via the channel pre-
sets X
Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Presets.
The channel preset list appears. The #dot
in front of a preset position indicates that
the currently selected channel is stored
there.
X Select the channel preset and briefly press
W.
Selecting channels from the channel
list As soon as the vehicle or COMAND is in oper-
ation, the background reception function of
the TV tuner lists the channels that can cur-
rently be received in the channel list.
The channel list contains the following infor-
mation, if it is transmitted and reception is
adequate:
R
the names of the channels that can be
received
R the names of the current programmes (dig-
ital channels only)
R time information for the current pro-
grammes (digital channels only)
R preview of the following programmes (dig-
ital channels only)
i The background reception function
requires a certain amount of time to update
this information. COMAND can only display
the information if the TV channels are 90
TV*COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7 2009-02-27T14:54:17+01:00 - Seite 90
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:15:02; WK

transmitting it and if the reception condi-
tions are adequate.
X Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Channel list.
The station list appears.
It is sorted alphabetically and contains:
R analogue TV channels (all standards)
R digital TV channels (DVB-T standard)
R digital radio stations (DVB-T standard)
The #dot in front of a list entry indicates
the currently selected channel. A number
in front of the list entry indicates the preset
position in the channel preset memory.
Selecting channels by entering the
channel and programme number i
Several programmes can be transmitted
on one channel with digital TV. You can
therefore enter a channel and the desired
programme on this channel. Only one pro-
gramme can be sent on a channel with ana-
logue TV. The programme entry function
therefore has no effect.
X Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Channel entry.
X Select a number to enter the channel or
programme.
X To select a higher or lower number: slide
ZV Æor turn cVd.
X To select the next number: slideXVY.
X To confirm the entry: pressW.
i The TV tuner always sets the channel and
the programme that you have entered.
Therefore, you can also set channels and programmes that cannot currently be
received. Storing TV channels
There are twenty preset positions.
Storing channels manually Calling up the preset memory display and
selecting a preset
X
Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Save channel.
or
X Select Presets.
Both of these will bring up a selection list.
The #dot in front of a preset position
indicates that the currently selected chan-
nel is stored there.
X To select a preset position: slideZVÆor
turn cVd.
Storing the channel to the selected preset
position
X If you have called up the channel preset
display via the Save channel menu item,
press Wbriefly.
or
X If you have called up the channel preset
display via the Presetsmenu item, press
and hold Wuntil a tone sounds.
The channel is stored.
Storing using Autostore This function automatically stores channels
which can be received in order of their recep-
tion quality. Any channels stored manually in
the preset memory will be lost.
X
Select VideoQTV.
X Display the menu system if necessary
(Y page 90). TV*
91COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7 2009-02-27T14:54:17+01:00 - Seite 91 Z
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:15:02; WK

X
Select Presets QAutostore .
or
X Select TVQ Save channel QAutos‐
tore.
COMAND searches for channels. The avail-
able channels are automatically stored in
the preset positions. Information about the current pro-
gramme
i This function is only available on digital TV
channels.
X Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select Info.
If the service is provided by the current TV
channel, you will see a field containing
information about the programme.
i It may take a few seconds for the infor-
mation to appear.
X To scroll the display: slideZVÆ or turn
cVd . Displaying the current programme or
programme preview
i This function is only available on digital TV
channels.
X Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Channel list.
The channel list appears. It shows the cur-
rent programme on the digital TV channels
which have adequate reception. The #dot
in front of a list entry indicates the currently
selected channel. :
TV channel
; To display the programme preview
= Current programme
? Graphic display of the elapsed pro-
gramme time
X To display the programme preview:
select Display programme preview.
The channel list indicates the next pro-
gramme on the channels in the list. :
TV channel
; To display the current programme
= Next programme
? Start and end times of the programme
X To display the current programme:
select Display current programme .
X To close the display: slideXVY. Picture settings
Brightness, contrast or colour X
Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Brightness orContrast or
Colour . 92
TV*COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7 2009-02-27T14:54:17+01:00 - Seite 92
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:15:03; WK

X
To change the setting: slideZVÆ or turn
cVd until the desired setting is reached.
X To save the setting: pressW.
Changing the picture format X
Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TV.
The TV menu appears. The #dot in front
of the Auto,16:9 optimised ,4:3 or
Widescreen menu item indicates the for-
mat currently set.
If you have switched Autooff, you can only
switch between the 16:9 and 4:3 formats.
X To change the format: slideZVÆ or turn
cVd until the desired format is selected.
X To save the format: pressW. Basic TV settings
Fixing the frequency The TV tuner may automatically switch to an
alternative channel with the same pro-
gramme content but better reception,
depending on reception quality. You can use
Channel fix to prevent this channel switch-
ing. This is useful, for example, when there is
a noticeable time offset between the frequen-
cies or if there is interference on a frequency.
X Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ Channel fix .
You have switched the function on or off. A
tick appears next to Channel fixwhen
the function is switched on. You will also
see the FIXdisplay in the main area.
X To exit the menu: slideXVY. Setting the reception region The correct reception region setting ensures
that analogue TV channels can be received
with the usual quality and functionality.
COMAND is set to the correct reception
region at the factory. If you are driving your
vehicle in a different country or region, you
should set COMAND accordingly. A
Mercedes-Benz Service Centre can help you
to select the correct reception region if nec-
essary.
X
Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X Select TVQ TV standard.
The reception region list appears. The #
dot in front of a list entry indicates the cur-
rently selected country.
X To select the reception region: slide
ZVÆ or turn cVduntil the desired region
is selected.
X To save the selection: pressW.
A message appears to inform you that if the
wrong country is set, correct reception will
not be possible.
X Select YesorNo.
If you select Yes, COMAND will switch to
the country setting you have selected.
If you select No, the country list will appear
again. Teletext
Switching teletext on or off i
Teletext can only be received if there is no
interference in the picture reception. The
teletext function receives all teletext
pages, with the exception of subpages, for
the channel currently set and saves them
in the system memory. When you set a dif-
ferent channel, the memory is cleared and
refilled. TV*
93COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7 2009-02-27T14:54:17+01:00 - Seite 93 Z
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:15:03; WK

X
Select VideoQTV.
X Display the menu system if necessary
(Y page 90).
X To switch on: selectTeletext.
X To switch off: press the%back button.
Selecting a teletext page X
To enter a page number directly: select
a number button.
X To select a higher or lower number: slide
ZVÆ or turn cVd.
Dynamic teletext page A dynamic teletext page consists of several
subpages. The display automatically changes
to the next page after a certain time. MUSIC REGISTER*
i This function is available if COMAND is
equipped with an integrated hard disk.
You can store music files in MP3 or WMA for-
mat in the MUSIC REGISTER. The memory has
a capacity of approximately 7 GB.
! Retain the original music files in a secure
location. An error in COMAND might result
in the loss of the music files stored in the
MUSIC REGISTER. Mercedes-Benz is not
liable for any loss of data. Menu overview
MUSIC REGISTER Search Media Sound
Normal track
sequence
Search functions Media selection via
media list Treble
Random media Bass
Random track list Balance/fader
Copying music files
Surround sound*
Deleting all music
files
Memory space info
Displaying title infor-
mation
TA (traffic announce-
ment)94
MUSIC REGISTER*COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7 2009-02-27T14:54:17+01:00 - Seite 94
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:15:03; WK

Switching to the MUSIC REGISTER
From another main mode X
Select Audio.
The system changes to the last active audio
mode.
X Select Audioagain.
The Audio menu appears.
X Select MUSIC REGISTER.
i IfMusic Register was the last mode,
you only need to select Audio.
From audio mode X
Select Audio.
The Audio menu appears.
X Select MUSIC REGISTER.
MUSIC REGISTER is loaded. The MUSIC
REGISTER display appears.
There are no music files:
You see a message to this effect.
X You first need to copy music files to the
MUSIC REGISTER (Y page 95).
There are music files:
You hear the first track in the first folder, or
playback begins at the last point listened to. Example display: MUSIC REGISTER
:
Type of data medium: MUSIC REGISTER
; Track number
= Track name
? Track time
A Visual time and track display B
Current playback settings (no symbol for
"Normal track sequence")
C Sound settings
D Media selection
E Current folder
F Search functions
G Data carrier position in the media list
H To call up the MUSIC REGISTER menu Copying music data to the MUSIC
REGISTER
You can copy music files from discs in the
DVD changer* or the single DVD drive, or
from the memory card, as long as they are in
MP3 and/or WMA format.
i While copying, several functions will not
be available. If this is ever the case, you will
see a message to this effect.
Selecting a data carrier X
Select MUSIC REGISTERQCopy music
files.
The media list appears. A data carrier from
which files can be copied is selected auto-
matically. :
Data carrier selected
X To select a data carrier: slideZVÆ or turn
cVd and confirm with W.
The data carrier is loaded. MUSIC REGISTER*
95COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7 2009-02-27T14:54:17+01:00 - Seite 95 Z
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:15:03; WK

Selecting music files
X
Select All music files.
This function copies all music files on the
selected data carrier. The symbol in front
of All music files is filled in.
X Select Next.
The copying menu appears.
Starting the copying process :
To copy from a memory card
; To copy to the MUSIC REGISTER
= Memory requirement; see "Calling up
memory space info" (Y page 96)
? To start the copying process
A Name of the data carrier from which data
is being copied and storage location
B To cancel copying of music files
C Data carrier position in the media list
X Select Start.
Copying begins. The progress bar indicates
the status of the copying procedure.
X To exit without copying music files:
select Back.
X To select the destination folder: scroll up
or down and select the respective folder.
Once copying is complete, you hear the
first track on the album copied. The MUSIC
REGISTER display appears. Now you can
copy more music files to the MUSIC REG-
ISTER.
! Under no circumstances should you
remove the memory card while you are copying data from it. This will generate
unusable data in the MUSIC REGISTER.
:
Progress bar
i It may take some time for the music to be
copied, depending on the amount of data.
The time required may vary depending on
the data source. If there is not enough
memory space, you will see a message to
this effect.
X To cancel copying: selectCancel.
Music files up until the point of cancellation
are stored in the MUSIC REGISTER. Deleting all music files
This function deletes all music files from the
MUSIC REGISTER.
! The deletion procedure may take several
minutes. In order to prevent malfunctions,
do not use COMAND during this time.
X Select MUSIC REGISTERQDelete all
music files.
A prompt appears, asking whether the
entry should be deleted. Calling up memory space info
X Select MUSIC REGISTERQMemory info.
You see a window with details about:
R storage capacity
R available memory 96
MUSIC REGISTER*COMAND
* optional
216_AKB; 2; 3, en-GB
bjanott,
Version: 2.11.7.7 2009-02-27T14:54:17+01:00 - Seite 96
Dateiname: 6515230602_buchblock.pdf; erzeugt am 04. Mar 2009 11:15:04; WK