141
Continue to lift up the hood until it is
high enough to support with the prop
rod.
79JM022
If the supporting rod is not
positioned correctly the bon-
net may fall violently.
WARNING
To close the engine hood:
Lift the hood up slightly and remove the
prop rod from the hole. Put the prop
rod back to the holding clip.
Lower the hood close to the bumper,
then let it drop down. Make sure the
hood is securely latched after closing.
For safety reasons the bon-
net must be closed properly
to avoid its opening while the vehi-
cle is travelling. Therefore, always
check it is properly closed and the
catch engaged. Should you notice
that the catch is not perfectly en-
gaged when travelling, stop the vehi-
cle immediately and close the bonnet.
WARNING
129-148 SEDICI LUM FL GB 1E 19-06-2009 13:31 Pagina 141
