Downloaded from www.Manualslib.com manuals search engine Restraints Control Module (RCM)
Removal & Installation
1. Turn the ignition off.
2. Disconnect the negative battery cable.
WARNING!
Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or
component service. Failure to do so may result in accidental airbag development, serious or fatal injury (See
Airbag System Disarming Procedure in Section 14 Restraints).
3. Remove the center console (See Center Console Removal & Installation in Section 15 Body & Accessories).
4. Disconnect the Restraints Control Module (RCM)electrical connector (1).
5. Remove the RCM retaining bolts (2). (Tighten: RCM retaining bolts to 7-9 N·m)
6. Remove the RCM from the vehicle.
7. Installation is in the reverse order of the removal.
ON-VEHICLE SERVICE
LTSM140006
14
14–49Chery Automobile Co., Ltd.
