2009 CHERY TIGGO belt

Downloaded from www.Manualslib.com manuals search engine SEAT BELT SYSTEM
GENERAL INFORMATION14-51
Description 14-51
Operation 14-51
Specifications 14-51
Special Tools 14-51
ON-VEHICLE SERVICE14-52
Front Seat Belt and Pre-Tensioner 14-52
Removal & Installation 14-52 Seat Belt Slider Track
14-53
Removal & Installation 14-53
Rear Seat Belt and Pre-Tensioner 14-54
Removal & Installation 14-54
14–50Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine GENERAL INFORMATION
Description
The left and right seat belt buckles are bolted to the base frame of the seat. The seat belt buckles are a typical
buckle design with a release button on the top to free the seat belt.
Operation
The primary passenger restraints are the seat belts. Seat belts are referred to as an active restraint because the
vehicle occupants are required to physically fasten and properly adjust these restraints in order to benefit from them.
The passive restraints are referred to as a supplemental restraint system because they were designed and are
intended to enhance the protection for the occupants of the vehicle only when used in conjunction with the seat belts.
Specifications
Torque Specifications
DESCRIPTIONTORQUE (N·m)
Adjustable Shoulder Belt Anchor Bolts 50
Front Seat Belt Buckle Retaining Bolt 50
Front Seat Belt Pre-Tensioner Lower Retaining Bolt 50
Front Seat Belt Upper Turning Loop Retaining Bolt 50
Rear Seat Belt Pre-Tensioner Upper Retaining Bolt 50
Rear Seat Belt Pre-Tensioner Lower Retaining Bolt 50
Special Tools
Digital Multimeter
Fluke 15B & 17B
14
14–51Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine ON-VEHICLE SERVICE
Front Seat Belt and Pre-Tensioner
Removal & Installation
1. Turn the ignition off.
2. Disconnect the negative battery cable.
3. Remove the seat belt upper mounting bolt (1).
4. Remove the seat belt lower mounting bolt (1).
5. Remove the B-pillar lower trim panel.
LTSM150077
LTSM150076
14–52Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine 6. Remove the front seat belt pre-tensioner retainingbolt (1) and screw (2).
(Tighten: Front seat belt retaining bolt to 50 N·m)
7. Remove the front seat belt and pre-tensioner.
8. Installation is in the reverse order of removal.
Seat Belt Slider Track
Removal & Installation
1. Turn the ignition off.
2. Remove the seat belt upper mounting bolt (1).
3. Remove the B-pillar upper trim panel.
ON-VEHICLE SERVICE
LTSM140003
LTSM150077
14
14–53Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine 4. Remove the two bolts (1) and then remove theseat belt slider track.
(Tighten: Adjustable shoulder belt anchor bolts to
50 N·m)
5. Installation is in the reverse order of the removal.
Rear Seat Belt and Pre-Tensioner
Removal & Installation
1. Turn the ignition off.
2. Remove the rear seat belt mounting bolts (1). (Tighten: Rear seat belt mounting bolts to 50 N·m)
3. Remove the C-pillar (See C-pillar Trim Panel Remove & Installation in Section 15 Body & Acces-
sories).
ON-VEHICLE SERVICE
BESM140006
LTSM140005
14–54Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine BODY INTERIOR TRIM
A-Pillar Trim Panel
Removal & Installation
1. Grasp the trim panel and gently pull it away torelease the retaining clips.
2. Using a trim stick, remove the A-pillar trim panel.
3. Installation is in the reverse order of removal.
Installation Notes:
• The A-pillar trim panel retaining clips should be installed to allow the trim panel to fit tightly between the head-
liner and the weatherstrip.
B-Pillar Lower Trim Panel
Removal & Installation
1. Remove the front seat belt lower mounting bolt (1).
2. Using a trim stick, remove the lower trim panel from the B-pillar.
3. Installation is in the reverse order of removal.
BESM150123
LTSM150076
15
15–11Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine B-Pillar Upper Trim Panel
Removal & Installation
1. Remove the front seat belt upper mounting bolt (1).
2. Using a trim stick, remove the B-pillar upper trim panel.
3. Installation is in the reverse order of removal.
C-Pillar Lower Trim Panel
Removal & Installation
1. Remove the rear seat belt mounting bolt (2).
2. Remove the mounting screws (1) under the panel.
3. Remove the storage box.
4. Disconnect the power outlet electrical connector.
5. Using a trim stick, remove the lower trim panel.
6. Installation is in the reverse order of removal.
BODY INTERIOR TRIM
LTSM150077
LTSM150078
15–12Chery Automobile Co., Ltd.

Downloaded from www.Manualslib.com manuals search engine C-Pillar Upper Trim Panel
Removal & Installation
1. Remove the C-Pillar lower trim panel (See C-Pillar Lower Trim Panel Removal & Installation in Section 15 Body& Accessories).
2. Remove the rear seat belt mounting bolts (1).
3. Using a trim stick, remove the C-Pillar upper trim panel.
4. Installation is in the reverse order of removal.
Assist Handle
Removal & Installation
1. Remove the assist handle mounting screws trim cover from the assist handles.
2. Remove the mounting screws (1). (Tighten: Assist handle screws to 2 N·m)
3. Remove the assist handle.
4. Installation is in the reverse order of removal.
BODY INTERIOR TRIM
LTSM140005
LTSM150079
15
15–13Chery Automobile Co., Ltd.