TECHNICAL SPECIFICATIONS
253
FLUIDS AND LUBRICANTS
RECOMMENDED PRODUCTS AND THEIR SPECIFICATIONS
Should non-genuine products be used, lubricants with minimum ACEA A3 properties for petrol engines and ACEA B4 for Diesel engines are tolerated; in this
event top engine performance is not guaranteed.
Using low-quality products, not compliant with ACEA A3 and ACEA B4 properties and specifications could cause engine damages not covered by warranty.
For very cold temperatures, consult Alfa Romeo Authorised Services for the proper Seleniaproduct to use.
SELENIA 20K for
ALFA ROMEO
SELENIA RACING
SELENIA WRAs per Service
Schedule
As per Service
Schedule
As per Service
Schedule Use Fluid and lubricant specifications Genuine fluids Change
for correct car operation and lubricants intervals
Lubricants for
petrol engines
1.8 T. SPARK
Lubricants for
petrol engines
2.0 JTS - 3.2
V6
Lubricants for
Multijet engines
Synthetic-based oils, grade SAE 10W-40
FIAT 9.55535-G2qualification
Synthetic-based oil, grade SAE 10W-60
FIAT 9.55535-H3qualification
Synthetic-based oil, grade SAE 5W-40
FIAT 9.55535-N2qualification.
PROVISIONS FOR THE PROCESSING OF A VEHICLE
AT THE END OF ITS LIFE-CYCLE
For years now Alfa Romeo has been developing its global commitment towards the safeguarding and protection of the Environment through
the continuous improvement of its production processes and the making of increasingly more “eco friendly” products. With a view to guaran-
teeing the best possible service to clients in full observance of environmental standards and in response to the obligations imposed by Euro-
pean Directive 2000/53/EC on end-of-life vehicles, Alfa Romeo offers its clients the possibility to hand in their vehicle* at the end of its life
span without additional costs.
The European Directive, in fact, provides for the take-back of the vehicle without the last holder or owner of the same incurring expenses due
to the fact that the market value of the vehicle is zero or negative. In particular, in almost all of the countries of the
European Union, up until 1st January 2007, take-back of the vehicle free of charge only applies to vehicles registered from 1 July 2002 on,
while, from 2007 on, take-back will be carried out free of charge, independently of the year of registration, provided that the vehicle still con-
tains all its essential component parts (especially engine and body) and is free from additional waste materials.
Our contracted network of authorised treatment facilities has been carefully selected in order to provide a quality service to our customers by
de-polluting and recycling “End of Life Vehicles” to approved environmental standards. To find out the location of your nearest authorised
treatment facility, offering free of charge take-back, simply contact one of our dealers or refer to the Alfa Romeo web site or call the toll free
number 00800 2532 0000.
*
Passenger transportation vehicles to seat a max. of nine persons, having a total admissible weight of 3.5 t
COLD TYRE INFLATION PRESSURES
ENGINE OIL REPLACEMENT
Oil sump and filter (1.8 T. SPARK - 2.0 JTS) ........................ litres 4.4
Oil sump and filter (3.2
V6) .............................................. litres 5.9
Oil sump and filter (JTD
16V) ............................................. litres 4.5
Do not discard used oil in the environment.
REFUELLING
Fuel tank capacity............................................................ litres 63
Reserve .......................................................................... litres 7
Only refuel petrol engines with unleaded petrol with octane rating (RON)
not less than 95.
Only refuel diesel engines with diesel fuel for motor vehicles (Specifica-
tion EN590).
CUSTOMER SERVICESTECHNICAL SERVICES - SERVICE ENGINEERING
Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia)
Fiat Group Automobiles S.p.A.
Print No. 60431933 - 1
stEdition - 05/2008All rights reserved. Reproduction, even in part is prohibited without written permission
from Fiat Group Automobiles S.p.A.
SERVICE
Tyres
195/60 R15bar
205/60 R15bar
205/55 R16bar
205/55 ZR16bar
215/45 R17bar
225/45 ZR17bar
225/40 ZR18bar
Compact spare wheel (*)125/80 R15barreduced load
front rear
2.2 2.2
2.3 2.3
2.3 2.3
2.3 2.3
2.4 2.3
2.5 2.4
2.5 2.4
4.2full load
front rear
2.5 2.5
2.6 2.6
2.6 2.6
2.6 2.6
2.7 2.6
2.8 2.7
2.8 2.7
4.2
With the tyre hot the inflating pressure should be +0.3 bar compared with the specified rating
With winter tyres the inflation pressure should be +0.2 bar compared with the specified rating
(*) The compact spare wheel cannot be used on 3.2
V6version
