●●●●●●●●●
●●
●●●●
●●●●
●●
●
●●●
●
●
●
●●●●●●●●●
●●●●●●●●●
●●●
●●●●●●●●●
●●●●●●●●●
CAR MAINTENANCE
218
20 40 60 80 100 120 140 160 180Thousands of km
Check and if necessary top up the Selespeed automatic transmission oil level
(2.0 JTS versions)
Sight check for conditions of timing gear drive toothed belt (3.2 V6 and JTD versions)
Check emissions/smoke at the exhaust (JTD versions)
Check operation of engine control system (through diagnosis socket)
Check mechanical transmission oil level
Change counter-rotating shaft drive belt
Change timing gear drive belt (1.8 T.SPARK and 2.0 JTS versions) (*)
Change timing gear drive belt (3.2 V6 and JTD versions) (*)
Change accessory poly-V drive belt
Change spark plugs (petrol versions)
Change engine oil and oil filter (petrol versions) (or every 24 months)
Change engine oil and oil filter (diesel with DPF versions)(**)
(or every 24 months)
Change engine oil and oil filter (diesel without DPF versions)(**)
(or every 24 months)
Change brake fluid (or every 24 months)
Change fuel filter (JTD versions)
Change pollen filter (or every year)
(*) Regardless of the km covered, the timing belt shall be replaced every 4 years for particularly demanding use (cold climates, driving in the city, idling for a long time) or in any case every 5 years.
(**) Engine oil and oil filter shall actually be changed according to the conditions of use of the car and it is indicated by the relevant warning light or message (where provided) on the instrument panel
(see “Warning lights and messages” paragraph).
If the car is used mainly on urban routes or if the yearly kilometres travelled are less than 10,000 km, the engine oil and filter must be changed every 12 months.
TECHNICAL SPECIFICATIONS
254
Brake fluid
Protective agent for radiators
Windscreen and rear window
washer fluid Lubricants and greases for
transmissions Use
Fluid and lubricant specifications
for correct car operation
Synthetic-based oil, grade SAE 75W-85
that passes API GL-4 PLUS, FIAT 9.55550
Lubricant for automatic transmissions that passes
“ATF DEXRON II D LEV” specification
Specific fluid for gear selector electrohydraulic actuators
Molibdenum disulphide, lithium soap based grease.
Synthetic fluid, F.M.V.S.S. n. 116, DOT 4, ISO 4925, SAE J-1704
Protective with antifreeze action, red colour based on inhibited monoethylen
glycol and organic formula, that passes CUNA NC 956-16,
ASTM D 3306 specifications
Mixture of alcohol and surfactants CUNA NC 956-11Genuine fluids
and lubricants
TUTELA
CAR TECHNYX
TUTELA GI/A
TUTELA CAR CS SPEED
TUTELA STAR 500
TUTELA TOP 4
for Alfa Romeo
PARAFLU
UP
TUTELA
PROFESSIONAL SC 35Applications
Mechanical gearbox and
differential
Hydraulic power steering
Selespeed
electrohydraulic actuator
CV joints
on wheel side
Brake and clutch
hydraulic controls
Cooling circuits.
Proportion:
50% down to –35° C.
Not to be mixed with
products having different
formulas.
To be used diluted or
undiluted
