Installation for mobile telephone with voice command system
32Installation for mobile telephone with voice command systemIntroductionThis system allows to connect your mobile phone and to use
its hands-free mode.The hands-free device means that the telephone can be used inside the
vehicle; the driver will not have to remove their hands from the steering wheel
nor will be distracted from traffic.
Data are transmitted between your mobile telephone and the hands-free
system using Bluetooth wireless technology.
Note
•
The voice command system is only available in the following languages:
Spanish, German, English, French, Italian and Czech. Other languages (such
as Dutch or Portuguese) will have Spanish as the default language for voice
instructions, and the vehicle must be taken to an Authorised Service Centre
for the change to be made.
•
There are certain versions of mobile telephone software that contain
errors. These errors may gi ve rise to faulty operation of the vehicle hands-free
system. In this case, consult the Authorised Service Centre for your mobile
telephone.
Basic functionsThe voice command system can be activated with the “press
to talk” button, located on the multi-function control.Talk button
The voice command system can be activated with the “press to talk”
button, located on the multi-function control.
If one of these buttons is pressed while using the speech control system, the
function is cancelled.
After pushing the “press to talk” button, ⇒fig. 10 wait some seconds for
the sound signal after which the vocal commands may be used. These
commands may be used to manage the functions of the hands-free telephone
system as well as the phone book.
Fig. 10 Talk button on the
multi-function control
AC
AC
Car stereo_EN.book Seite 32 Dienstag, 18. März 2008 4:15 16
