2008 RENAULT SCENIC display

MULTIMEDIA
Fault finding - Conformity check
86C
86C - 24V5 MR-372-J84-86C050$520.mif
ITS
Program no.: 0020
Vdiag No.: 04MULTIMEDIA
Fault finding - Conformity check
MAIN SCREEN
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application conditions: Engine stopped, + after ignition feed switched on.
Order FunctionParameter or Status
Check or Action Display and Notes Fault finding
1Night-time
lightingET003:+ 12 V side
lights feedON
OFFIn the event of a fault, consult
the interpretation of status
ET003 + 12 V side lights
feed.
2Vehicle speed PR002:Vehicle speed0 mph
Carry out a road test to
obtain a variation.In the event of a fault, consult
the interpretation of
parameter PR002 Vehicle
speed.
3Reverse gear ET024:Reverse gear
engagedYES
NOIn the event of a fault, consult
the interpretation of status
ET024 Reverse gear
engaged.
4CD multi-
changerPR005:Number of CDs
in the multi-
changer0, 1, 2, 3, 4, 5 or 6None
ITS_V04_CCONFITSJ84ph2V1.0
MR-372-J84-86C050$520.mif

MULTIMEDIA
Fault finding - Conformity check
86C
86C - 25V5 MR-372-J84-86C050$520.mif
ITS
Program no.: 0020
Vdiag No.: 04
Sub-function: DRIVER SELECTION
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application conditions: Engine stopped, + after ignition feed switched on.
Order FunctionParameter or Status
Check or Action Display and Notes Fault finding
1Steering
column switchET006:+ buttonDEPRESSED
RELEASED
In the event of a fault,
consult the interpretation of
statuses ET006 + button,
ET007 - button, ET010 low
button, ET009 high button
and ET034 MODE button. ET007:- buttonDEPRESSED
RELEASED
ET010:Lower buttonDEPRESSED
RELEASED
ET009:Upper buttonDEPRESSED
RELEASED
ET034:MODE buttonDEPRESSED
RELEASED
2Communication
connection
buttonET017:Communication
connection
buttonDEPRESSED
RELEASEDIn the event of a fault, consult
the interpretation of status
ET017 Communication
button.
3Steering
column controlET018:Wheel actionINACTIVE
UPWARDS
DOWNWARDSIn the event of a fault, consult
the interpretation of status
ET018 Wheel activation.
Note:
If you need to work on the telephone, ensure that you have the PIN code.
ITSJ84ph2V1.0

MULTIMEDIA
Fault finding - Conformity check
86C
86C - 26V5 MR-372-J84-86C050$520.mif
ITS
Program no.: 0020
Vdiag No.: 04
Sub-function: SOUND TESTS
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application conditions: Engine stopped, + after ignition feed switched on.
Order FunctionParameter or Status
Check or Action Display and Notes Fault finding
1Speakers test AC004:Speaker testThis command
enables the front left-
hand, front right-
hand, rear left-hand
and rear right-hand
speakers to be
activated
successively.In the event of a fault, apply
the interpretation of
command AC004 Speakers
test.
ITSJ84ph2V1.0

MULTIMEDIA
Fault finding - Conformity check
86C
86C - 27V5 MR-372-J84-86C050$520.mif
ITS
Program no.: 0020
Vdiag No.: 04
Sub-function: TESTS
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application conditions: Engine stopped, + after ignition feed switched on.
Order FunctionParameter or Status
Check or Action Display and Notes Fault finding
1ScreenAC006:Screen test:
colour barsThis command is used
to test the colour
connections between
the navigation
computer and the
display.In the event of a fault, apply
the interpretation of
command AC006 Screen
test: colour bars.
AC007:Screen test:
shades of greyThis command is used
to test the video
connections between
the navigation
computer and the
display.In the event of a fault, apply
the interpretation of
command AC007 Screen
test: gradation of grey.
AC008:Screen test:
white screenThis command is used
to test the screen to
see if a pixel from the
display is out of order.Replace the display if several
pixels are out of order.
2Microphone AC009:Microphone testThis command is for
testing microphone
operation.
Note:
If it is quiet, speak into
the microphone to
check that it is working.In the event of a fault, apply
the interpretation of
command
AC009 Microphone test.
ITSJ84ph2V1.0

MULTIMEDIA
Fault finding - Interpretation of commands
86C
86C - 40V5 MR-372-J84-86C050$832.mif
ITS
Program no.: 0020
Vdiag No.: 04
AC006
SCREEN TEST: COLOUR BARS
NOTESThere must be no present or stored faults.
Use the Wiring Diagrams Technical Note, Scenic II.
Apply this procedure if one or more colour bars is missing on the display when this command is run.
Check the condition and connection of the display connector (component code 1127) and of the navigation
computer 32-track connector (component code 662) (broken, oxidised, bent tabs).
If the connectors are faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the connectors; otherwise, replace the wiring.
Check for + 12 V on connection BCP3 of the component 1127 connector.
Check that the earth on connection 34GU of the component 1127 connector is perfect.
If any connection is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring; otherwise, replace the wiring.
Check the insulation, continuity and the absence of interference resistance on the following connections:
●connection code TB31,
●connection code 34DD,
●connection code 34DC,
●connection code 34DB,
●connection code 34GU,
between components 1127 and 662.
If any connection is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring; otherwise, replace the wiring.
If the checks reveal no faults, but the colours displayed by component 1127 are incorrect, replace
component 1127.
AFTER REPAIRCarry out another fault finding check on the system.
ITSJ84ph2V1.0

MULTIMEDIA
Fault finding - Interpretation of commands
86C
86C - 41V5 MR-372-J84-86C050$832.mif
ITS
Program no.: 0020
Vdiag No.: 04
AC007
SCREEN TEST: GRADATION OF GREY
NOTESThere must be no present or stored faults.
Use the Wiring Diagrams Technical Note, Scenic II.
Apply this procedure if the shade of grey shown on the display when the command is activated is incorrect.
Check the condition and connection of the display connector (component code 1127) and of the navigation
computer 32-track connector (component code 662) (broken, oxidised, bent tabs).
If the connectors are faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the connectors; otherwise, replace the wiring.
Check that the earth on connection 34GU of the component 1127 connector is perfect.
If the connection is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring; otherwise, replace the wiring.
Check that the earth on the MAN connection of component 1127 is perfect.
Check for + 12 V on connection BCP3 of the component 1127 connector.
If any connection is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring; otherwise, replace the wiring.
Check the insulation, continuity and the absence of interference resistance on the following connections:
●connection code TB30,
●connection code 34HA,
●connection code 34GZ,
between components 1127 and 662.
If any connection is faulty and if there is a repair method (see Technical Note 6015A, Repairing electrical wiring,
Wiring: Precautions for repair), repair the wiring; otherwise, replace the wiring.
If the checks reveal no faults, but the gradation of grey displayed by the display is not correct, replace
component 1127.
AFTER REPAIRCarry out another fault finding check on the system.
ITSJ84ph2V1.0

MULTIMEDIA
Fault finding - Customer complaints
86C
86C - 43V5 MR-372-J84-86C050$884.mif
ITS
Program no.: 0020
Vdiag No.: 04MULTIMEDIA
Fault finding - Customer complaints
NOTESOnly refer to these customer complaints after performing a full check with the
diagnostic tool.
NO DIALOGUE WITH THE COMPUTER ALP 1
THE SCREEN STAYS BLACKALP 2
NO VOICE MESSAGESALP 3
NO TRAFFIC INFORMATION MESSAGES APPEAR ON THE SCREEN ALP 4
POOR SATELLITE RECEPTIONALP 5
THE RADIO DOES NOT SWITCH ON AUTOMATICALLY OR GOES OFF AFTER
20 MINUTESALP 6
NO TIME DISPLAY OR TIME DISPLAY INCORRECT ALP 7
THE VOLUME DOES NOT CHANGE WITH A CHANGE IN VEHICLE SPEED ALP 8
POOR RADIO RECEPTIONALP 9
THE CD CHANGER DOES NOT WORK ALP 10
IMPOSSIBLE TO ALTER GPS GUIDANCE WHEN DRIVING ALP 11
ITSJ84ph2V1.0
MR-372-J84-86C050$884.mif

MULTIMEDIA
Fault finding - Customer complaints
86C
86C - 44V5 MR-372-J84-86C050$884.mif
ITS
Program no.: 0020
Vdiag No.: 04
NOTESOnly refer to these customer complaints after performing a full check with the
diagnostic tool.
AFTER UPDATING THE NAVIGATION DVD, THE SYSTEM NO LONGER WORKS ALP 12
IMPOSSIBLE TO USE TELEPHONE WITH BLUETOOTH ALP 13
NOT POSSIBLE TO MAKE A CALL FROM THE NUMBERS STORED IN THE LIST OF
RECEIVED CALLSALP 14
THE CALL IS NOT TRANSFERRED TO THE NAVIGATION AND COMMUNICATION
SYSTEM IF A NUMBER IS DIALLED ON THE TELEPHONEALP 15
COMMUNICATIONS ARE SUBJECT TO INTERFERENCE IN BLUETOOTH ALP 16
THE PERSON CALLING USING THE COMMUNICATION SYSTEM CANNOT HEAR
ME VERY WELL OR CANNOT HEAR ME AT ALL (WITH BLUETOOTH)ALP 17
VOICE RECOGNITION IS NOT WORKING ALP 18
THE DISPLAY ON THE SCREEN STAYS FROZEN ALP 19
THE SCREEN DISPLAYS CONNECT A DIAGNOSTIC TOOL ALP 20
ITSJ84ph2V1.0