2008 Peugeot 407 C Dag display
[x] Cancel search: displayPage 30 of 211
1
31
TRIP COMPUTER
or
TRIP (Route): access
to the trip computer dis-
plays.
Zero reset
When the required route is displayed,
press the control for more than
two seconds. - the route
"1" tab with:
Page 31 of 211
1
32
Press the "MENU" button to gain access
to the general menu.
Select the "Trip computer" or "Vehicle
diagnostics" application using the navi-
g a t o r , t h e n c o n fi r m o r p r e s s t h e "MODE"
button until you reach the trip computer
s c r e e n , t h e n c o n fi r m u s i n g "OK" .
The "Trip computer" or "Vehicle diag-
nostics" menu offers various options:
- Warnings log,
- Status of the functions,
- Inputting of the distance to be trav- elled.
Warnings log
This summarises the active warning
messages, displaying them on the
multifunction display in succession.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Distance remaining
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled value.
Display on the instrument panel screen
All of the various items of trip computer
information also appear on the instrument
panel screen at the same time.
Distance remaining to be travelled (km or miles)
Average speed (km/h or mph)
Average consumption (l/100 or km/l or mpg)
Distance travelled (km or miles)
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
This is the distance remaining to the
destination, either calculated at any
time by the navigation if guidance is
activated or entered by the user, minus
the distance covered since the distance
was entered.
If digits are missing, dashes are dis-
played in their place.
This is the average fuel consumption
since the computer was last set to
zero.
This indicates the distance travelled
since the computer was last set to
zero.
"TRIP" (Route) menu
Page 32 of 211
2
33
COLOUR SCREEN C
This displays the following information,
via the WIP Sound audio system control
pad:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k
of ice),
- t h e a c c e s s e s c h e c k ,
- the warning messages,
- the audio functions,
- the trip computer information,
- t h e p e r s o n a l i s a t i o n a n d c o n fi g u r a t i o n displays,
- the air conditioning parameters,
- t h e f r o n t a n d r e a r p a r k i n g a s s i s t a n c e display,
- t h e h a n d s - f r e e k i t d i s p l a y s . Management of the displays
General menu
Press the
"MENU" button to gain access
to the general menu and select one of
the following functions:
- "Audio functions",
- "Trip computer",
- " P e r s o n a l i s a t i o n - C o n fi g u r a t i o n " ,
- "Air conditioning",
- " T e l e p h o n e " . " P e r s o n a l i s a t i o n - C o n fi g u r a t i o n "
menu
This provides access to successive
c o n fi r m a t i o n w i n d o w s .
D e fi n i n g t h e v e h i c l e p a r a m e t e r s
This enables you to activate or deactivate
certain driving and comfort elements:
- "Automatic switching on of the
lights",
- "Follow-me-home lighting" and "Duration",
- "Remote control action",
- " P e r m a n e n t l o c k i n g o f t h e b o o t " ,
- " D i r e c t i o n a l h e a d l a m p s " .
The
"AUDIO" , "TRIP" , "CLIM" and
"TEL" buttons on the RD4 audio equip-
ment control pad permit displaying in
t h e m a i n w i n d o w .
Example: "TRIP"
Example: "Audio functions"
Example: "Automatic switching on of
the lights"
Page 33 of 211
2
34
S e l e c t i o n o f t h e l a n g u a g e
German, Spanish, French, English,
I t a l i a n , D u t c h , T u r k i s h , P o r t u g u e s e
a n d B r a z i l i a n P o r t u g u e s e .
C o n fi g u r a t i o n o f t h e d i s p l a y
- " S e t t i n g t h e b r i g h t n e s s - v i d e o " .
- " S e t t i n g t h e d a t e a n d t i m e " .
- " S e l e c t i o n o f t h e u n i t s " .
- " S e l e c t i o n o f t h e c o l o u r s " . Changing the date and time
From the
general menu , select the
" P e r s o n a l i s a t i o n - C o n f i g u r a t i o n "
i c o n u s i n g t h e n a v i g a t o r , t h e n c o n fi r m .
From the list displayed, select
" C o n fi g u r a t i o n o f t h e d i s p l a y " , then
c o n fi r m .
From the list displayed, select "Setting
the date and time" , t h e n c o n fi r m . Set the parameters one by one:
- the zone selected is displayed on
the screen,
- use the navigator to move from one zone to another,
- y o u r n e w p a r a m e t e r s a r e c o n fi r m e d one by one, by pressing the navigator
button,
- all of the changes are saved, if you c l i c k o n "OK" on the screen, or
cancelled, if you press the "ESC"
b u t t o n o n t h e c o n t r o l p a d .
F o r s a f e t y r e a s o n s , c o n fi g u r a -
tion of the multifunction dis-
plays by the driver must be
c a r r i e d o u t w h i l e s t a t i o n a r y .
Page 34 of 211
2
35
16/9 COLOUR SCREEN DT
This displays the following information,
via the WIP Com audio and telematics
system control panel:
- the time,
- the date,
- the outside temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k
of ice),
- the status of the accesses,
- the warning messages or vehicle function status messages, displayed
temporarily,
- the audio functions,
- the telematic systems display ( t e l e p h o n e , s e r v i c e s , . . . ) ,
- the trip computer information,
- t h e p e r s o n a l i s a t i o n a n d c o n fi g u r a t i o n displays,
- the air conditioning parameters,
- t h e f r o n t a n d r e a r p a r k i n g a s s i s t a n c e display,
- the satellite navigation system i n f o r m a t i o n . General menu
Press the
"MENU" button to access
the general menu and select one of
the following functions:
- "Navigation - guidance",
- "Map",
- " T r a f fi c i n f o r m a t i o n " ,
- "Audio functions",
- "Telematics",
- " C o n fi g u r a t i o n " ,
- "Video",
- "Vehicle diagnostics",
- " A i r c o n d i t i o n i n g " . " C o n fi g u r a t i o n " m e n u
This provides access to the following
functions:
- " D i s p l a y c o n fi g u r a t i o n " ,
- "Sound",
- "Select language",
- " D e fi n e t h e v e h i c l e p a r a m e t e r s " .
Page 35 of 211
2
36
D i s p l a y c o n fi g u r a t i o n
- "Choose colour",
- "Adjust brightness",
- "Adjust date and time",
- " S e l e c t u n i t s " . "Video" menu
D e fi n e t h e v e h i c l e p a r a m e t e r s
This enables you to activate or deactivate
certain driving and comfort functions:
- "Automatic switching on of the
headlamps",
- "Follow-me-home lighting" and "Duration",
- "Remote control action",
- "Directional headlamps",
- " P e r m a n e n t l o c k i n g o f t h e b o o t " .
Example: "Automatic switching on of
the headlamps"
You can connect video equipment (cam-
c o r d e r , d i g i t a l c a m e r a , D V D p l a y e r , . . . )
t o t h e t h r e e v i d e o s o c k e t s , l o c a t e d i n t h e
g l o v e b o x .
V i d e o s c a n o n l y b e d i s p l a y e d w h e n
stationary.
Select the "Video" menu from the
general menu :
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
c o n t r a s t a n d t h e c o l o u r s .
Pressing the "DARK" button disconnects
t h e d i s p l a y f r o m t h e v i d e o .
Successive presses on the "SOURCE"
button permit the selection of an audio
s o u r c e o t h e r t h a n t h a t o f t h e v i d e o .
F o r s a f e t y r e a s o n s , c o n fi g u r a t i o n
of the multifunction displays by
t h e d r i v e r m u s t t a k e p l a c e w h e n
s t a t i o n a r y .
Page 36 of 211
2
36
D i s p l a y c o n fi g u r a t i o n
- "Choose colour",
- "Adjust brightness",
- "Adjust date and time",
- " S e l e c t u n i t s " . "Video" menu
D e fi n e t h e v e h i c l e p a r a m e t e r s
This enables you to activate or deactivate
certain driving and comfort functions:
- "Automatic switching on of the
headlamps",
- "Follow-me-home lighting" and "Duration",
- "Remote control action",
- "Directional headlamps",
- " P e r m a n e n t l o c k i n g o f t h e b o o t " .
Example: "Automatic switching on of
the headlamps"
You can connect video equipment (cam-
c o r d e r , d i g i t a l c a m e r a , D V D p l a y e r , . . . )
t o t h e t h r e e v i d e o s o c k e t s , l o c a t e d i n t h e
g l o v e b o x .
V i d e o s c a n o n l y b e d i s p l a y e d w h e n
stationary.
Select the "Video" menu from the
general menu :
- "Activate video mode" to activate/ deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the
c o n t r a s t a n d t h e c o l o u r s .
Pressing the "DARK" button disconnects
t h e d i s p l a y f r o m t h e v i d e o .
Successive presses on the "SOURCE"
button permit the selection of an audio
s o u r c e o t h e r t h a n t h a t o f t h e v i d e o .
F o r s a f e t y r e a s o n s , c o n fi g u r a t i o n
of the multifunction displays by
t h e d r i v e r m u s t t a k e p l a c e w h e n
s t a t i o n a r y .
Page 43 of 211
3
44
PROGRAMMABLE HEATING Programming remote control
T h e h e a t i n g s y s t e m p r o g r a m m i n g
remote control consists of the following
b u t t o n s a n d d i s p l a y s :
1. S c r o l l i n g f u n c t i o n s m e n u b u t t o n s .
2. Function indicator lights: clock,
t e m p e r a t u r e , o p e r a t i n g t i m e , p r o -
g r a m m e d t i m e , h e a t e r o p e r a t i o n ,
h e a t i n g m a n a g e m e n t s y m b o l s .
3. D i g i t a l d i s p l a y s : t i m e , t e m p e r a t u r e ,
d u r a t i o n o f o p e r a t i o n , p r o g r a m m e d
t i m e o r l e v e l o f h e a t i n g .
4. O f f b u t t o n .
5. O n b u t t o n .
Displaying the functions
If a malfunction of the programma-
ble heating system occurs, contact
a PEUGEOT dealer.
T h e p r o g r a m m a b l e h e a t i n g o p e r a t e s
i n d e p e n d e n t l y o f t h e e n g i n e .
W h e n t h e e n g i n e i s o f f , i t p r e - h e a t s
t h e c o o l a n t c i r c u i t i n o r d e r t o b e n e fi t
f r o m a n o p t i m u m e n g i n e o p e r a t i n g
t e m p e r a t u r e f r o m t h e t i m e t h e e n g i n e
i s s w i t c h e d o n .
T h e p r o g r a m m a b l e h e a t i n g s y s t e m i s
switched on using the long range remote
c o n t r o l . A c t i v a t i o n c a n b e i m m e d i a t e o r
d e f e r r e d b y m e a n s o f a p r o g r a m m i n g
f u n c t i o n .
screen
Press the buttons
1 in succession to
d i s p l a y t h e f u n c t i o n s .
T h e fi r s t p r e s s o f t h e l e f t - h a n d o r r i g h t -
h a n d b u t t o n d i s p l a y s t h e t i m e .
N e x t , t h e l e f t - h a n d b u t t o n p e r m i t s
a c c e s s t o t h e p r o g r a m m i n g t i m e t h e n
t o t h e l e v e l o f h e a t i n g ( C 1 t o C 5 ) .
T h e r i g h t - h a n d b u t t o n p e r m i t s a c c e s s
t o t h e p a s s e n g e r c o m p a r t m e n t t e m p e -
r a t u r e t h e n t o t h e d u r a t i o n o f o p e r a t i o n
of the heater if it is to be switched on
i m m e d i a t e l y .
T h e p a s s e n g e r c o m p a r t m e n t
t e m p e r a t u r e i n f o r m a t i o n i s o n l y
available when the engine is
o f f .