REAR WIPER AND WASHER SYSTEM
WW-31
< SERVICE INFORMATION >
C
D
E
F
G
H
I
J
L
MA
B
WW
N
O
P
OK or NG
OK >> Replace BCM. Refer to BCS-18, "Removal and Installation of BCM" .
NG >> Check the wiper switch. Refer to BCS-3, "
System Description" .
Only Rear Wiper Intermittent Does Not OperateINFOID:0000000001704575
1.CHECK COMBINATION SWITCH INPUT SIGNAL
Select "BCM" on CONSULT-III. With "WIPER" data monitor, make sure "RR WIPER INT" turns ON-OFF
according to operation of wiper switch.
OK or NG
OK >> Replace BCM. Refer to BCS-18, "Removal and Installation of BCM" .
NG >> Check the wiper switch. Refer to BCS-3, "
System Description" .
Wiper Does Not Wipe When Rear Washer OperatesINFOID:0000000001704576
1.CHECK COMBINATION SWITCH INPUT SIGNAL
Select "BCM" on CONSULT-III. With "WIPER" data monitor, make sure "RR WASHER SW" turns ON-OFF
according to operation of rear washer switch.
OK or NG
OK >> Replace BCM. Refer to BCS-18, "Removal and Installation of BCM" .
NG >> Check the wiper switch. Refer to BCS-3, "
System Description" .
Removal and InstallationINFOID:0000000001704577
REAR WIPER ARM
Removal
1. Raise wiper arm cover (1), and remove the rear wiper arm nut
(A).
2. Remove the wiper arm.
3. Remove wiper blade.
Installation
1. Operate rear wiper motor one full cycle, then turn "OFF" (Auto Stop). When rear wiper switch is in
ON position: RR WIPER ON ON
When rear wiper switch is in
INT position: RR WIPER INT ON
When rear wiper switch is in
WASHER position: RR WASHER SW ON
LKIA0787E
WW-34
< SERVICE INFORMATION >
REAR WIPER AND WASHER SYSTEM
3. Release retaining clips and remove washer nozzle.
Installation
Installation is in the reverse order of removal.
NOTE:
Inspect rear washer nozzle for proper spray pattern, adjust as necessary. Refer to WW-34, "
Washer Nozzle
Adjustment" .
WASHER FLUID RESERVOIR
Refer to WW-22, "Removal and Installation of Washer Tank" .
WIPER AND WASHER SWITCH
Refer to WW-22, "Removal and Installation of Front Wiper and Washer Switch" .
WASHER MOTOR
Refer to WW-23, "Removal and Installation of Front Washer Motor" .
Washer Nozzle AdjustmentINFOID:0000000001704578
Adjust the washer nozzle to specification using suitable tool as
shown.
LKIA0545E
Adjustable range : ±15° (In any direction)
LKIA0349E
WEL912A
