2008 NISSAN TEANA navigation

AV-204
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
CONFIRMATION/ADJUSTMENT MODE
1. Start the diagnosis function and select “Confirmation/Adjustment”. The confirmation/adjustment mode
indicates where each item can be checked or adjusted.
2. Select each switch on the “Confirmation/Adjustment Mode”
screen to display the relevant trouble diagnosis screen. Press
the “BACK” switch to return to the initial Confirmation/Adjust-
ment Mode screen.
When either one of the following
items is detected:
 rear control switch power supply and
ground circuits are malfunctioning.
 AV communication signal between
AV control unit and rear control
switch is malfunctioning.Rear control switch power supply and
ground circuits
With rear control switch
When either one of the following
items is detected:
 malfunction is detected in AV com-
munication circuits between rear
control switch and camera control
unit.
 malfunction is detected in AV com-
munication circuits between camera
control unit and BOSE amp.  AV communication circuits between
rear control switch and camera con-
trol unit
 AV communication circuits between
camera control unit and BOSE amp.
Without rear control switch
When either one of the following
items is detected:
 malfunction is detected in AV com-
munication circuits between multi-
function switch and camera control
unit.
 malfunction is detected in AV com-
munication circuits between camera
control unit and BOSE amp. AV communication circuits between
multifunction switch and camera
control unit
 AV communication circuits between
camera control unit and BOSE amp.
Malfunction is detected in AV commu-
nication circuits between AV control
unit and multifunction switch.AV communication circuits between
AV control unit and multifunction
switch Area with yellow connection lines DescriptionPossible malfunction location / Action
to take
JSNIA1330GB
JSNIA1331GB
JSNIA1332GB
JSNIA0147GB

AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-205
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P Display Diagnosis
The tint of the color bar indication is as per the following list if RGB signal error is detected.
Vehicle Signals
A comparison check can be made of each actual vehicle signal and
the signals recognized by the system.
Sp ea ke r Tes t
JSNIA0688GB
R (red) signal error : Light blue (Cyan) tint
G (green) signal error : Purple (Magenta) tint
B (blue) signal error : Yellow tint
JSNIA0149GB
Diagnosis item Display Vehicle status Remarks
Vehicle speedON Vehicle speed > 0 km/h (0 MPH)
Changes in indication may be delayed by approximately
1.5 seconds. This is normal. OFF Vehicle speed = 0 km/h (0 MPH)
Parking brakeON Parking brake is applied.
OFF Parking brake is released.
LightsON Light switch ON
Block the light beam from the auto light optical sensor.
OFF Light switch OFF
IgnitionON Ignition switch ON
—
OFF Ignition switch in ACC position
ReverseONShift the selector lever to “R” posi-
tion
Changes in indication may be delayed by approximately
1.5 seconds. This is normal.
OFFShift the selector lever other than
“R” position

AV-206
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Select “SPEAKER DIAGNOSIS” to display the Speaker Diagnosis
screen. Press “START and NEXT” to generate a test tone in a
speaker. Press “Start” to generate a test tone in the next speaker.
Press “End” to stop the test tones.
NOTE:
The frequency of test tone emitted from each speaker is as follows.
Climate Control
On-board self-diagnosis is not supported. Only CONSULT-III is supported.
Refer to HAC-156, "
WITHOUT INTELLIGENT AIR CONDITIONER SYSTEM : CONSULT-III Function" for
details.
Camera Cont.
Refer to AV-196, "System Description".
Error History
The self-diagnosis results are judged depending on whether any error occurs from when “Self-diagnosis” is
selected until the self-diagnosis results are displayed.
However, the diagnosis results are judged normal if an error has occurred before the ignition switch is turned
ON and then no error has occurred until the self-diagnosis start. Check the “Error Record” to detect any error
that may have occurred before the self-diagnosis start because of this situation.
The error record displays the time and place of the most recent occurrence of that error. However, take note of
the following points.
 Place of the error occurrence is represented by the position of the current location mark at the time an error
occurred. If current location mark has deviated from the correct position, then the place of the error occur-
rence cannot be located correctly.
 The frequency of occurrence is displayed in a count up manner. The actual count up method differs depend-
ing on the error item.
Count up method A
 The counter resets to 0 if an error occurs when IGN switch is turned ON. The counter increases by 1 if the
condition is normal at a next IGN ON cycle.
 The counter upper limit is 39. Any counts exceeding 39 are ignored.“ The counter can be reset (no error
record display) with the “Delete log” switch or CONSULT-III.
Count up method B
 The counter increases by 1 if an error occurs when IGN switch is ON. The counter will not decrease even if
the condition is normal at the next IGN ON cycle.
 The counter upper limit is 50. Any counts exceeding 50 are ignored. “ The counter can be reset (no error
record display) with the “Delete log” switch or CONSULT-III.Squawker : 3 kHz
Front speaker : 300 Hz
Rear speaker : 1 kHz
JSNIA0150GB
Display type of occur-
rence frequencyError history display item
Count up method A CAN communication line, control unit (CAN), AV communication line, control unit (AV communication)
Count up method B Other than the above

AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-207
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
Error item
Some error items may be displayed simultaneously according to the cause. If some error items are displayed
simultaneously, the detection of the cause can be performed by the combination of display items
JSNIA0151GB
Error item Description Possible malfunction factor/Action to take
CAN COMM CIRCUITCAN communication malfunction is detect-
ed.Perform diagnosis with CONSULT-III, and
then repair the malfunctioning parts accord-
ing to the diagnosis results.
CONTROL UNIT (CAN)CAN initial diagnosis malfunction is detect-
ed.
Replace the AV control unit. CONTROL UNIT (AV)AV communication circuit initial diagnosis
malfunction is detected.
FLASH-ROM Error Of Control Unit
AV control unit malfunction is detected.
CAN Controller Memory Error
Amplifier Temperature Error BOSE amp. malfunction is detected. Replace the BOSE amp.
Front Display Connection ErrorWhen either one of the following items is
detected:
 display unit power supply and ground cir-
cuits are malfunctioning.
 serial communication circuits between
display unit and AV control unit are mal-
functioning.
 serial communication signal between
display unit and AV control unit is mal-
functioning. Display unit power supply and ground
circuits.
 Serial communication circuits between
display unit and AV control unit.
Camera Cont. Unit Connection ErrorA malfunction is detected in camera con-
nection recognition signal circuit.Camera connection recognition signal cir-
cuit.
Center speaker OUT: openSound signal center speaker circuit is
open.Check sound signal center speaker circuit.
Center speaker OUT: shortSound signal center speaker circuit is
shorted between center speaker signal (+)
and center speaker signal (-).Check sound signal center speaker circuit.
Center speaker OUT: short to groundSound signal center speaker circuit to
ground is shorted.Check sound signal center speaker circuit.
Center speaker OUT: short to batterySound signal center speaker circuit to bat-
tery is shorted.Check sound signal center speaker circuit.
FR speaker OUT: openSound signal front speaker RH circuit is
open.Check sound signal front speaker RH cir-
cuit.

AV-208
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
FR speaker OUT: shortSound signal front speaker RH circuit is
shorted between front speaker RH signal
(+) and front speaker RH signal (-).Check sound signal front speaker RH cir-
cuit.
FR speaker OUT: short to groundSound signal front speaker RH circuit to
ground is shorted.Check sound signal front speaker RH cir-
cuit.
FR speaker OUT: short to batterySound signal front speaker RH circuit to
battery is shorted.Check sound signal front speaker RH cir-
cuit.
RR speaker OUT: openSound signal rear speaker RH circuit is
open.Check sound signal rear speaker RH cir-
cuit.
RR speaker OUT: shortSound signal rear speaker RH circuit is
shorted between rear speaker LH signal (+)
and rear speaker LH signal (-).Check sound signal rear speaker RH cir-
cuit.
RR speaker OUT: short to groundSound signal rear speaker RH circuit to
ground is shorted.Check sound signal rear speaker RH cir-
cuit.
RR speaker OUT: short to batterySound signal rear speaker RH circuit to bat-
tery is shorted.Check sound signal rear speaker RH cir-
cuit.
RR Woofer OUT: open Sound signal woofer RH circuit is open. Check sound signal woofer RH circuit.
RR Woofer OUT: shortSound signal woofer RH circuit is shorted
between woofer RH signal (+) and woofer
RH signal (-).Check sound signal woofer RH circuit.
RR Woofer OUT: short to groundSound signal woofer RH circuit to ground is
shorted.Check sound signal woofer RH circuit.
RR Woofer OUT: short to batterySound signal woofer RH circuit to battery is
shorted.Check sound signal woofer RH circuit.
RL Woofer OUT: open Sound signal woofer LH circuit is open. Check sound signal woofer LH circuit.
RL Woofer OUT: shortSound signal woofer LH circuit is shorted
between woofer LH signal (+) and woofer
LH signal (-).Check sound signal woofer LH circuit.
RL Woofer OUT: short to groundSound signal woofer LH circuit to ground is
shorted.Check sound signal woofer LH circuit.
RL Woofer OUT: short to batterySound signal woofer LH circuit to battery is
shorted.Check sound signal woofer LH circuit.
RL speaker OUT: openSound signal rear speaker LH circuit is
open.Check sound signal rear speaker LH circuit.
RL speaker OUT: shortSound signal rear speaker LH circuit is
shorted between rear speaker LH signal (+)
and rear speaker LH signal (-).Check sound signal rear speaker LH circuit.
RL speaker OUT: short to groundSound signal rear speaker LH circuit to
ground is shorted.Check sound signal rear speaker LH circuit.
RL speaker OUT: short to batterySound signal rear speaker LH circuit to bat-
tery is shorted.Check sound signal rear speaker LH circuit.
FL speaker OUT: openSound signal front speaker LH circuit is
open.Check sound signal front speaker LH cir-
cuit.
FL speaker OUT: shortSound signal front speaker LH circuit is
shorted between front speaker LH signal
(+) and front speaker LH signal (-).Check sound signal front speaker LH cir-
cuit.
FL speaker OUT: short to groundSound signal front speaker LH circuit to
ground is shorted.Check sound signal front speaker LH cir-
cuit.
FL speaker OUT: short to batterySound signal front speaker LH circuit to
battery is shorted.Check sound signal front speaker LH cir-
cuit.
FL tweeter OUT: openSound signal front squawker LH circuit is
open.Check sound signal front squawker LH cir-
cuit. Error item Description Possible malfunction factor/Action to take

AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-209
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
FL tweeter OUT: shortSound signal front squawker LH circuit is
shorted between front squawker LH signal
(+) and front squawker LH signal (-).Check sound signal front squawker LH cir-
cuit.
FL tweeter OUT: short to groundSound signal front squawker LH circuit to
ground is shorted.Check sound signal front squawker LH cir-
cuit.
FL tweeter OUT: short to batterySound signal front squawker LH circuit to
battery is shorted.Check sound signal front squawker LH cir-
cuit.
FR tweeter OUT: openSound signal front squawker RH circuit is
open.Check sound signal front squawker RH cir-
cuit.
FR tweeter OUT: shortSound signal front squawker RH circuit is
shorted between front squawker RH signal
(+) and front squawker RH signal (-).Check sound signal front squawker RH cir-
cuit.
FR tweeter OUT: short to groundSound signal front squawker RH circuit to
ground is shorted.Check sound signal front squawker RH cir-
cuit.
FR tweeter OUT: short to batterySound signal front squawker RH circuit to
battery is shorted.Check sound signal front squawker RH cir-
cuit.
AV COMM CIRCUITRear control switch power supply and
ground circuits malfunction are detected.Rear control switch power supply and
ground circuits.
 AV COMM CIRCUIT
 Switches Connection ErrorWhen either one of the following items is
detected:
 multifunction switch power supply and
ground circuits are malfunctioning.
 AV communication circuits between AV
control unit and multifunction switch are
malfunctioning.
 AV communication signal between AV
control unit and multifunction switch is
malfunctioning. Multifunction switch power supply and
ground circuits.
 AV communication circuits between AV
control unit and multifunction switch.
 AV COMM CIRCUIT
 Amplifier Connection ErrorWhen either one of the following items is
detected:
 BOSE amp. power supply and ground
circuits are malfunctioning.
 AV communication signal between AV
control unit and BOSE amp. is malfunc-
tionning.BOSE amp. power supply and ground cir-
cuits.
 AV COMM CIRCUIT
 DVD Deck Connection ErrorWhen either one of the following items is
detected:
 DVD player power supply and ground cir-
cuits are malfunctioning.
 AV communication circuits between
BOSE amp. and DVD player are mal-
functioning.
 AV communication signal between AV
control unit and DVD player is malfunc-
tioning. DVD player power supply and ground cir-
cuits.
 AV communication circuits between
BOSE amp. and DVD player.
 AV COMM CIRCUIT
 DVD Deck Connection Error
 Amplifier Connection ErrorWhen either one of the following items is
detected:
 AV communication circuits between cam-
era control unit and BOSE amp. are mal-
functioning.
 AV communication signal between AV
control unit and BOSE amp. is malfunc-
tioning.AV communication circuits between cam-
era control unit and BOSE amp. Error item Description Possible malfunction factor/Action to take

AV-210
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
Vehicle CAN Diagnosis
 CAN communication status and error counter is displayed.
 The error counter displays "OK" if any malfunction was not
detected in the past and displays "0" if a malfunction is detected. It
increases by 1 if the condition is normal at the next ignition switch
ON cycle. The upper limit of the counter is 39.
 The error counter is erased if reset.
AV COMM Diagnosis
 Displays the communication status between AV control unit (mas-
ter unit) and each unit.
 The error counter displays "OK" if any malfunction was not
detected in the past and displays "0" if a malfunction is detected. It
increases by 1 if the condition is normal at the next ignition switch
ON cycle. The upper limit of the counter is 39.
 If it resets, the error counter is erased.
 AV COMM CIRCUIT
 DVD Deck Connection Error
 Amplifier Connection Error
 Rear view Camera connection ErrorWith rear control switch
When either one of the following items is
detected:
 malfunction is detected in AV communi-
cation circuits between rear control
switch and camera control unit.
 malfunction is detected in AV communi-
cation circuits between camera control
unit and NAVI control unit.  AV communication circuits between mul-
tifunction switch and rear control switch.
 AV communication circuits between rear
control switch and camera control unit.
Without rear control switch
When either one of the following items is
detected:
 malfunction is detected in AV communi-
cation circuits between multifunction
switch and camera control unit.
 malfunction is detected in AV communi-
cation circuits between camera control
unit and NAVI control unit.AV communication circuits between multi-
function switch and camera control unit.
 AV COMM CIRCUIT
 Switches Connection Error
 DVD Deck Connection Error
 Amplifier Connection Error
 Rear view Camera connection ErrorWhen either one of the following items is
detected:
 AV communication circuits between AV
control unit and multifunction switch are
malfunctioning.
 AV communication signal between AV
control unit and multifunction switch is
malfunctioning.AV communication circuits between AV
control unit and multifunction switch. Error item Description Possible malfunction factor/Action to take
Items Display (Current)Malfunction counter
(Past)
Tx (HVAC) OK / UNKWN OK / 0 – 39
Rx (ECM) OK / UNKWN OK / 0 – 39
Rx (Cluster) OK / UNKWN OK / 0 – 39
Rx (BCM) OK / UNKWN OK / 0 – 39
Rx (HVAC) OK / UNKWN OK / 0 – 39
Rx (USM) OK / UNKWN OK / 0 – 39
JSNIA1287GB
ItemsStatus
(Current)Counter
(Past)
C Tx(ITM–SW) OK / UNKWN OK / 0 – 39
C Rx(PrimarySW–ITM) OK / UNKWN OK / 0 – 39
JSNIA1288GB

AV
DIAGNOSIS SYSTEM (AV CONTROL UNIT)
AV-211
< FUNCTION DIAGNOSIS >[BOSE AUDIO WITHOUT NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P Delete Unit Connection Log
Deletes any unit connection records and error records from the AV
control unit memory. (Clear the records of the unit that has been
removed)
CONSULT-III Function (MULTI AV)INFOID:0000000003765658
CONSULT-III FUNCTIONS
CONSULT-III performs the following functions via the communication with the AV control unit.
AV COMMUNICATION
When “AV communication” of “CAN Diag Support Monitor” is selected, the following function will be performed.
SELF-DIAGNOSIS RESULTS
 In CONSULT-III self-diagnosis, self-diagnosis results and error history are displayed collectively.
 The timing is displayed as “0” if any of the error codes [U1000], [U1010], [U1300] and [U1310] is detected.
The counter increases by 1 if the condition is normal at the next ignition switch ON cycle.
Self-diagnosis Results Display Item
C Rx(RrSeatSW–ITM) OK / UNKWN OK / 0 – 39
C Rx(Amp–ITM) OK / UNKWN OK / 0 – 39
C Rx(RearCamera–ITM) OK / UNKWN OK / 0 – 39
C Rx(DVD–ITM) OK / UNKWN OK / 0 – 39
C Rx(AmpAudio–ITM) OK / UNKWN OK / 0 – 39
C Rx(DVDAudio–ITM) OK / UNKWN OK / 0 – 39ItemsStatu s
(Current)Counter
(Past)
JSNIA0154GB
Diagnosis mode Description
Ecu Identification The part number of AV control unit can be checked.
Self Diagnostic ResultPerforms a diagnosis on the AV control unit and a connection diagnosis for the communication
circuit of the Multi AV system, and displays the current and past malfunctions collectively.
Data Monitor The diagnosis of vehicle signal that is input to the AV control unit can be performed.
AV communicationAV&NAVI C/UDisplays the communication status from AV control unit to each unit as well as the error
counter.
AUDIO Displays the AV control unit communication status and the error counter.
Error item Detection logic Possible malfunction factor/Action to take
CAN COMM CIRCUIT [U1000]CAN communication malfunction is detect-
ed.Refer to AV- 2 1 6 , "
DiagnosisProcedure".
CONTROL UNIT (CAN) [U1010]CAN initial diagnosis malfunction is detect-
ed.
Replace the AV control unit.
Refer toAV- 3 7 8 , "
Removal and Installation"
AV- 3 7 8 , "
Removal and Installation". CONTROL UNIT (AV) [U1310]AV communication circuit initial diagnosis
malfunction is detected.
Control Unit FLASH-ROM [U1200]
AV control unit malfunction is detected.
CAN CONT [U1216]