2008 MERCEDES-BENZ SL ROADSTER keyless

[x] Cancel search: keyless

Page 62 of 317

MERCEDES-BENZ SL ROADSTER 2008  Owners Manual Anti-thef
tsyste ms 59G
Ris
kofa ccident
Make sure tha tyou do not endanger
other roa dusers when applying the
brakes.
R Yo us hould applythe brakes firml yfrom
tim etot imeatah ighv ehicle speedifthe

Page 63 of 317

MERCEDES-BENZ SL ROADSTER 2008  Owners Manual Anti-thef
tsyste ms 60button on the door handle/boo
tlid ca na lso
be used.
Indicato rlamp 1flashes. Th ealarm sys-
tem is primed after approximatel y15sec-
onds.
X To deactivate: unlock the vehicl eu

Page 64 of 317

MERCEDES-BENZ SL ROADSTER 2008  Owners Manual Anti-thef
tsyste ms 61Interio
rmotio nsenso r*
If the interior motio nsensorisp rimed, avis-
ua land audibl ealarm is triggered if move-
ment is detected in the vehicl einterior while
the vehicl eislo

Page 65 of 317

MERCEDES-BENZ SL ROADSTER 2008  Owners Manual Anti-thef
tsyste ms 62
X
Remove the key fro mthe ignition lock.
X Pres sbutton 2.
Indicato rlamp 1flashe sbriefly.
X Lock the vehicl eusing the key .Onvehicles
with KEYLESS GO*, the locking button on

Page 68 of 317

MERCEDES-BENZ SL ROADSTER 2008  Owners Manual Opening and closing
65
approximately six seconds until the battery
chec
klamp flashes twice.
The key now function sasfollows:
X To unlock the driver's door: press the
k buttononce.
X To unlock cen

Page 69 of 317

MERCEDES-BENZ SL ROADSTER 2008  Owners Manual Opening and closing
66
Important notes R
If the KEYLESSGOk ey is removedfrom the
vehicle (e.g. in luggage or an article of
clothing), it will no longer be possible to
lock or start the vehicle.
R If t

Page 70 of 317

MERCEDES-BENZ SL ROADSTER 2008  Owners Manual Opening and closing
67
X
To change the setting: press thek
and j buttons simultaneously for
approximately six seconds until the battery
chec klamp flashes twice.
The KEYLESSGOk ey will now function as

Page 74 of 317

MERCEDES-BENZ SL ROADSTER 2008  Owners Manual Opening and closing
71
unload more easily. For this purpose, you
can also open the boot separator.
Do not forget to close the boot separator
again afterwards. Otherwise, it will not be
possible to clo