2008 MERCEDES-BENZ C-Class light

70 Audio
Music Register
To switch to the next folder up: Se-
lect theQsymbol.
The display changes to the next folder
up.
Changing folder/track name
Select “Folder”.
To select a folder/track: Rotate ymz
or slide qmr.
Select “Options” K “Change”.
Enter a name for the folder/track in the
input line.
To save change: Select B.
Deleting folder/track
Select “Folder”.
To select a folder/track: Rotate ymz
or slide qmr.
Select “Options” K “Delete”.
A prompt appears. “No” is highlighted.
Do not delete: Press n.
To delete: Select “Yes” and press n.
A message appears.The following options are available:
“Normal Track Sequence”
You will hear the tracks in the normal
sequence (e. g. track 1, 2, 3 etc.).
“Random Tracks”
The tracks are played in random order.
“Random Folder”
The tracks of the currently active folder
and any subfolders are heard in ran-
dom order.
To select an option: Switch to Music
Register (

page 67).
Select “Music Register” in the sub-
menu.
The Options list appears. A dotRindi-
cates the activated option.
Select an option.
The option is activated. A correspond-
ing display will appear in the display/
selection window for all options except
“Normal Track Sequence”.
i The option “Normal Track Sequence” is au-
tomatically activated if you change the medium
which is currently being played or if you select
another medium. An activated option remains
active after COMAND is switched on or off.Playback options

75 Video
DVD video

After use, replace the discs into the
sleeve.

Protect the discs from heat and direct
sunlight.
Some DVDs may not comply with the
NTSC or PAL TV playback standards.
Sound, picture and other playback prob-
lems may occur when you play such DVDs.
As standard, COMAND can play video
DVDs which meet the following criteria:

Region code 1 or region code 0 (no re-
gion code)
i With a video DVD having another region
code, a corresponding message will be dis-
played.

PAL or NTSC TV standard
Information on this can usually be found ei-
ther on the DVD itself or on the DVD
sleeve.
i The factory setting for COMAND is region
code 1. An authorized Mercedes-Benz Center
can change this setting. This will enable you to
play video DVDs with other region codes, provid-
ed that they have been made to the PAL or NTSC
TV standard.
It may be the case that some functions or
actions may not be possible at certain
times, or may not be possible in general,
depending on the DVD.
When you activate such functions or ac-
tions, this is indicated by the 7 symbol in
the display.
Proceed as described in the “Loading
CDs and DVDs” section (
page 54).
Proceed as described in the “Ejecting
CDs and DVDs” section (
page 57).
DVD playback conditions
Functional restrictions
Loading DVDs
Ejecting DVDs

82 Video
DVD video
i The functions are not available for all DVDs.
The number of subtitles or camera angles is de-
termined by the DVD content. The settings may
also be possible in the DVD menu (
page 80).
In DVD video mode, if necessary dis-
play the menu system (
page 77).
Select “DVD-Video” K “DVD Func-
tions”.
Select “Subtitles” or “Camera Angle”.
In both cases, a selection menu will ap-
pear. The dotRin front of an entry in-
dicates the current setting.
To change setting: Rotate ymz or
slide qmr until the desired setting is
reached.
To save setting: Press n.
To exit menu without changes: Slide
omp.DVDs may have interactive content (e. g. a
video game).
In a video game, for example, you can con-
trol the play by selecting or triggering ac-
tions. The type and number of actions is
dependent on the DVD.
To select an action: Slide qmr or
omp.
To trigger an action: Press n.
A menu appears, the first entry
“Select” is highlighted.
Press n.
or
In DVD video mode, if necessary dis-
play the control menu (
page 77).
Select “Menu” K“DVD-Video” K “DVD
Functions”.
Select a directional arrow to select or
trigger an action.The way you can control the actions de-
pends on the DVD.
Subtitles and camera angleInteractive content

93 Telephone
COMAND phone book
The COMAND phone book is an extract of
entries from the COMAND address book.
All the COMAND address book entries hav-
ing at least one phone number can be
found in the COMAND phone book.
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $, %,
#,
s
or t buttons, for selecting a track or a
menu, scrolling through lists or initiating or end-
ing a call (
page 23).
Open the phone main menu
(
page 92).
Select “Name”.
The COMAND phone book is displayed.
COMAND phone book with search speller
1Address book entry
2Calls up options
3Search speller
4Closes phone book
5m symbol for voice tag
Address book entries may have the symbol
5. An additional voice tag is saved with
these entries.
If an address book entry has the symbol
+ then this has more than one phone
number. You can select these subentries
(
page 93).
To close phone book: In the search
speller select the symbol “Back”.
or
Press í.
Selecting via list
Rotate ymz or slide qmr until the de-
sired entry is highlighted.
Selecting subentries
Select an address book entry with the
symbol + from the list and press n.
The symbol + changes into / and
the subentries appear.
1Expanded phone book entry
2Phone book entry with subentries
Rotate ymz or slide qmr until the de-
sired subentry is highlighted.
COMAND phone book
Opening COMAND phone book
Selecting an entry

94 Telephone
COMAND phone book
Displaying details on an entry
COMAND can also fully display an abbrevi-
ated entry.
Select entry.
Select “Options” K “Details”.
The details screen appears.
To close details screen: Slide omp
repeatedly until the entry is highlighted
again.
Select entry (page 93).
Press n.
or
Press thew button on the COMAND
control unit.
If the entry contains subentries, a list
appears.
Select the desired subentry.
Press n again.
or
Press thew button on the
COMAND control unit.
i When a new entry is added through the
COMAND phone book, it is saved to the address
book.
Select “Options” K “New Entry” in the
COMAND phone book.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
Select “Save”.
The input menu with the data fields ap-
pears.
1Cursor
2Data field
3Predictive speller
4Selected phone category
Switching data field
Slide mq until the predictive speller is
not highlighted.
Then slide qmr to select desired field
and press n.
or
Select [ or ] in the speller.
The input menu indicates the selected
data field.
Initiating call to an entry
Creating a new entry

95 Telephone
COMAND phone book
Entering data into a field
Select all the characters one after the
other in the predictive speller 3.
i The predictive speller provides the charac-
ters corresponding to the selected data field.
To switch predictive speller to up-
per or lower case characters: Select
( or &.
To switch predictive speller charac-
ter set: Select #.
Every time this is selected it switches
the character set.
To change the predictive speller lan-
guage: Select !.
Rotate ymz or slide qmr until the re-
quired language is highlighted and
press n.
To move the cursor in the data field:
Select Y or Z.
Deleting an entry
To delete an individual character:
Select õ and briefly press n.
or
Press the î button next to the
COMAND controller.The character to the left of the cursor is
deleted.
To delete an entire entry: Select
õ and press and hold n until the
entire entry has been deleted.
or
Press and hold î until the entire en-
try has been deleted.
Cancelling an entry
Select A.
If one of the data fields contains data,
you will be prompted to confirm wheth-
er you wish to save the entry.
Select “Yes” or “No”.
The entry will be saved or discarded
on the basis of the selection.
Saving entry
Select B
A corresponding message is displayed.The deletion rules vary according to the en-
try selected:

Phone book entry selected:
The entry is deleted in the COMAND
phone book and the address book if the
address book entry only contains
phone numbers.

Entire address book entry selected:
The entry is deleted in the COMAND
phone book and additionally also in the
address book if the address book entry
only contains phone numbers.

Subentry of an address book entry se-
lected:
The subentry is deleted in the
COMAND phone book and in the ad-
dress book.
To delete: Select entry (page 104).
Select “Options” K “Delete”.
You will be prompted to confirm that
you really want to delete the entry.
Select “Yes” or “No”.
“Yes” option: The entry is deleted ac-
cording to the above rules.
Deleting entry

97 Telephone
Call lists
COMAND displays the calls received (in-
cluding missed calls) or made during
phone mode in their own lists.
i The particular menu item can only be select-
ed if calls have already been received or made
from COMAND.
The display of missed calls in the COMAND dis-
play is not possible with all mobile phones.
i The instrument cluster control system
displays a list of the last dialed calls.
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $, %,
#,
s
or t buttons, for selecting a track or a
menu, scrolling through lists or initiating or end-
ing a call (
page 23).
Calling up the list
In the phone main menu select “Call
Lists”.
Select “Calls Received” or “Calls Di-
aled”.
The appropriate list appears.
or
In the phone main menu
press
w.A list of the last dialed calls appears.
List of incoming calls
1List of calls received
2Date/time of the highlighted entry
3List entry options menu
i If there is a symbol in front of the phone
number or the name, then you have missed this
call.
To select a list entry: Rotate ymz or
slide qmr.
i You can call the selected list entry
(
page 102).
To close list: Select “Back”.
Displaying details on a list entry
COMAND can also fully display an abbrevi-
ated list entry.
Select the list entry.
Select “Options” K “Details”.
The details screen appears.
Back to the list: Slide omp repeatedly
until the list is highlighted.
Call lists

98 Telephone
Call lists
Saving unsaved list entry
Unsaved list entries are displayed by
means of the phone numbers.
Saved list entries are displayed as the
name. They are either saved in the address
book or in the COMAND phone book.
Saving in the address book as a new
entry
Select the list entry.
Select “Options” K“Save”K “New
Entry”.
i “Save” has no function if the selected list
entry has already been saved to the address
book.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
Select “Save”.
An input menu with data fields will ap-
pear. The data field for the phone num-
ber is completed automatically. The
data field for the last name is also com-
pleted if the entry to be saved contains
a name.1Cursor
2Data field
3Speller
4Data field for phone number is com-
pleted automatically
5Phone category
6Number category
To switch data field: Slide qm until
the last name line is highlighted.
Press n.
or
Select [ or ] and press n.
The selected data field is highlighted.
To enter data into a field: Select all
the characters one after the other in
the speller 3.
Number categoryDisplay
(phone and ad-
dress book)
“Not Classified” G
“Home”k
“Work”l
Phone category
“Not Classified”G
“Mobile Phone”O
“Car”n
“Pager”<