2008 MERCEDES-BENZ C-Class change wheel

25 At a glance
Multifunction steering wheel
Multifunction display menus
MenusFunctions and submenus
Navi (page 26)
Navigation messages
Audio (page 27)
Selecting radio stations

Operating the DVD changer/Music register /Memory card
Tel (page 29)
Accepting a call

Selecting a phone book entry

Calls dialed

26 At a glance
Multifunction steering wheel
The multi-function display shows naviga-
tion instructions in the Navi menu.
Select the Navi menu.
Route guidance inactive
1Direction of travel
2Current road
The road you are currently driving on only
appears if it is in the map software.
Route guidance active
No Maneuver announced

1Distance to destination
2Distance to next maneuver
3Current road
4Symbol for “follow the road's course”
Maneuver announced without change of
lane
1Road into which the maneuver leads
2Distance to maneuver and graphic dis-
tance display
3Symbol for maneuverWhen a maneuver is announced, you will
see the symbol for the maneuver and be-
side it a graphic distance display 2. This
decreases as you approach the announced
maneuver.
Maneuver announced with change of
lane
Lane recommendations are only displayed
if the relevant data is available on the digi-
tal map.
1Road into which the maneuver leads
2Distance to maneuver and graphic dis-
tance display
3Lane recommendation
4Symbol for maneuver
On multiple-lane roads, a lane recommen-
dation 3 may be shown for the next ma-
neuver. There may be additional lanes
during a maneuver.
Navi menu

27 At a glance
Multifunction steering wheel
Navigation status indicators in the
multi-function display
When route guidance is activated, the fol-
lowing messages may appear:

< : you have reached the destination.

“Dest. area reached”: you are ap-
proaching the destination. This mes-
sage appears, for example, with
relatively large special destinations.

“New route”: the system is calculating
a new route, for example because you
have deviated from the previous route.
Route guidance is subsequently re-
sumed.

“Calculating route”: a route is being cal-
culated, after which route guidance will
start.

“Off map”: the vehicle is outside the
range of the digital map. The vehicle is
in an off-map position.

“Off mapped road”: the vehicle is on a
road which is not in the digital map, or
is away from the road, for example in a
car park.

“No route”: no route to the selected
destination could be calculated.
Use the functions in the Audio menu to op-
erate the audio equipment. If no audio
equipment is switched on, the multi-func-
tion display shows the message Audio Off.
To adjust the volume:
press the
æ or ç button.
Selecting a radio station/channel
Switch on COMAND and select “FM/
AM Radio“ (
page 40) or “SatRadio“
(
page 47).
Select the Audio menu.
1Wave band
2Channel name or number
To select the next or previous pre-
set channel: briefly press % or
$.
or
To select the next or previous chan-
nel: press and hold % or $.
i You can only change the wave band and
save new stations/channels using COMAND.
Lane recommen-
dation displayMeaning
Lane without lower
limitUninterrupted lane
Lane with lower limitNew lane during a
maneuver
Line with arrowLane recommend-
ed for the maneu-
ver
Audio menu

28 At a glance
Multifunction steering wheel
Operating the DVD changer/Music reg-
ister/Memory card
Switch on COMAND and select “Disc“,
“Memory card“ (
page 60) or “Music
register“ (
page 67).
Select the “Audio“ menu.
Example: view of the CD player
1Current disc
2Current track
To select the next or previous track:
briefly press % or $.
or
To search for the next or previous
track: press and hold % or $.
i If you are playing a CD or DVD with track in-
formation, the multi-function display shows the
name and number of the track. The track is dis-
played on MP3s.
Operating the DVD video
Switch on COMAND and select DVD
video (
page 77).
Select the Audio menu.
1Current disc
2Current scene
To select the next or previous
scene: briefly press % or $.

35 At a glance
Basic functions of COMAND
i The COMAND components can be found on
(
page 14). Operating examples can be found
on (
page 31).
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. for volume setting the æ, ç
buttons, (
page 23).
Press the rotary/push button x.
or
Press the display cover button
The cover opens up and the
COMAND display folds out. A warning
message appears. COMAND opens the
last active menu.
i When COMAND is switched off, playback of
the current audio or video source is also
switched off.
To switch on/off: Press V.
The sound from the active audio or
video source is switched on or off.
i When the sound is switched off, the symbol
X appears in the status line.
If you change the audio or video source or alter
the volume, the sound is automatically switched
on again.
i Announcements from the navigation system
can still be heard with the sound switched off.
Switching navigation announcements
on/off
Press V during the announcement.
i The navigation announcements are
switched on again after restarting route guid-
ance or after switching COMAND off/on using
x.
To set: Turn the rotary/push button
x.
The volume of the selected audio or
video source changes.
Volume of navigation announcements
You can set the volume for navigation an-
nouncements independently of the volume
for the active audio or video source.
During a navigation announcement:
Turn the rotary/push button x.
Setting volume for phone calls
The volume for hands-free operation can
be set during an active phone call.
Turn the rotary/push button x.
Basic functions of COMAND
Switching COMAND on/off
Mute
Setting the volume

93 Telephone
COMAND phone book
The COMAND phone book is an extract of
entries from the COMAND address book.
All the COMAND address book entries hav-
ing at least one phone number can be
found in the COMAND phone book.
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $, %,
#,
s
or t buttons, for selecting a track or a
menu, scrolling through lists or initiating or end-
ing a call (
page 23).
Open the phone main menu
(
page 92).
Select “Name”.
The COMAND phone book is displayed.
COMAND phone book with search speller
1Address book entry
2Calls up options
3Search speller
4Closes phone book
5m symbol for voice tag
Address book entries may have the symbol
5. An additional voice tag is saved with
these entries.
If an address book entry has the symbol
+ then this has more than one phone
number. You can select these subentries
(
page 93).
To close phone book: In the search
speller select the symbol “Back”.
or
Press í.
Selecting via list
Rotate ymz or slide qmr until the de-
sired entry is highlighted.
Selecting subentries
Select an address book entry with the
symbol + from the list and press n.
The symbol + changes into / and
the subentries appear.
1Expanded phone book entry
2Phone book entry with subentries
Rotate ymz or slide qmr until the de-
sired subentry is highlighted.
COMAND phone book
Opening COMAND phone book
Selecting an entry

184 Voice Control
Navigation
You can use voice control to:

enter a state

enter a province

enter a city

enter a district (center)

enter a street

enter a house number

enter an entire address

enter a zip code

find address

enter a point of interest

select one of your previous destina-
tions

call up route information

store a destination

display the map

enlarge/reduce the size of the map

listen to the destination memory

start and stop route guidance

switch the guidance instructions on
and off
To select the navigation application
press the ! button on the multi-
function steering wheel.
Give the “Navigation” command.
Press the ! button.
Give one of the navigation commands
explained below.
You cannot start the route guidance until
all the necessary address data has been
entered.
“Help navigation”/“Help”
Using the “Help navigation” command, you
can have all the essential commands for
the navigation system read out.
i If voice control fails to recognize your entry,
it is advisable to spell the name of the town and
street. Spell names of towns and streets when
abroad.
The system guides you completely through
the dialog to route guidance. As soon as a
valid address is entered (at least the town),
you can use the “Start route guidance”
command to start the route guidance.
“Enter state”/“Enter province”
You can use the “Enter state”/“Enter pro-
vince” command to change the state or
province setting of the navigation system.
Example of dialog:
sEnter state
tPlease enter the name of the state.
uThe system shows a numbered list
of possible state names on the dis-
play. If there is only one entry on
the list, voice control asks if it is
correct.
tPlease select a line number.
sLine number 1 ...
tLine number 1 accepted.
Operation
Commands
Entering an address

195 Voice Control
Radio and Satellite Radio*
You can use voice control to:

select the waveband

find a station

select a frequency (FM, AM)

select a category (Satellite radio)

listen to the station list

save a voice tag for a station

delete a station list (voice tags only)

delete a station (voice tag only)

select a channel number (Satellite ra-
dio)The names of all received and stored sta-
tions are available for voice recognition. To
improve voice recognition, you can store a
voice tag for a specific speaker.
To select the radio or satellite radio
application: press the ! button on
the multi-function steering wheel.
Say the command “Radio” or “Satellite
Radio”.
Press the ! button.
Say one of the radio or satellite radio
commands explained below.
You can always give the commands for the
radio when you are listening to the radio,
even if a different application is shown on
the display.
“Help Radio”
Using the “Help Radio” command, you can
have all the commands for the radio read
out.
“Help Satellite Radio”
Using the “Help Satellite Radio” command,
you can have all the commands for the sat-
ellite radio read out.
Selecting a waveband
You can set the waveband with the follow-
ing commands:

“FM”

“AM”
“Next station”/“Previous station”
You can start manual tuning and set the
next station using the following com-
mands:

“Next station”

“Previous station”
“Next category”/“Previous category”
You can use the following commands to
change the category on satellite radio:

“Next category”

“Previous category”
Radio and Satellite Radio*
G Warning
Please devote your attention first and fore-
most to the traffic situation you are in.
Before your journey, please familiarize your-
self with the radio functions.
Only use the Voice Control System when
road and traffic conditions permit you to do
so. Otherwise you could be involved in an
accident in which you or others could be in-
jured.
OperationCommands