2008 MERCEDES-BENZ C-Class light

50 Audio
Satellite radio*
Storing via Autostore
i The function automatically assigns receiv-
able channels to the presets. The channels
which were stored in the channel memory man-
ually will be overwritten in this process.
Press n if the display/selection win-
dow is active.
Select “Autostore”.
or
Select “Presets” K “Autostore” from
the SatRadio submenu.
COMAND searches for receivable
channels. A corresponding message is
displayed. The available channels are
automatically stored under the presets.
Cancelling storage procedure
Select “Cancel”.Selecting a channel from the memory
list
To call up the channel list:
In the submenu rotate ymz or slide
omp until “Presets” is highlighted.
The presets list appears.
To select a channel: Rotate ymz or
slide qmr.
To tune to the selected channel:
Press n.
or
Press a number key, e.g. 4, on the
control unit.
Displaying information
In the submenu rotate ymz or slide
omp until “Info” is highlighted.
Press n.
Information about the current program
appears.1Category
2Channel
3Artist
4Song title
You will see (if available)
the full name
additional information
Switching back to the SatRadio main dis-
play:
Slide omp.

54 Audio
CD audio/DVD audio and MP3
i Discs with copy protection do not comply
with the CD audio standard and in some cases
cannot be played by COMAND.
When playing copied discs, problems may occur
with the playback.
A wide variety of discs, disc writing software and
writers are available. Due to this variety we can-
not guarantee that the system will be able to play
discs that you have written/copied yourself.
There may be playback problems with user-
burned CDs with a storage capacity of more than
700 MB. These CDs do not meet current valid
standards.
i When playing a DVD audio, it may be the
case with numerous albums that the last track
does not contain any music and COMAND
switches to the next track. This is due to the pro-
duction method and does not imply a fault with
the unit.
! Do not attach stickers or labels of any kind
to discs. They may come loose and damage
COMAND.
COMAND has been designed for discs meeting
the requirements of standard EN 60908. There-
fore, only discs with a maximum thickness of
1.3 mm can be used.
If a thicker disc is inserted, e.g. one which stores data on both sides, (DVD on one side, audio data
on the other side), this cannot be ejected and
COMAND will be damaged.
Do not use 8 cm diameter discs, not even with an
adapter. Only use round, 12 cm diameter discs.
i COMAND can play audio CDs with the high-
resolution surround format.
Only touch the discs at the edges.
Handle discs with care in order to pre-
vent malfunctions during playback.
Avoid scratching, leaving fingerprints
and dust on the discs.
Clean the discs occasionally with a
commercially available cleaning cloth.
Always wipe in a straight line from the
inside outwards, never in a circular mo-
tion.
The discs must only be labelled using
pens specially designed for this pur-
pose.
After use, put the discs back into the
box.
Protect the discs from heat and direct
sunlight.
i If the CD/DVD is printed on one side, this
side must face upwards when loaded. If neither
side is printed, the side to be played must face
downwards.
The system may not be able to play copy-protect-
ed CDs/DVDs.
Notes on CD/DVD discs
Notes on the care of
CD/DVD discs
Loading CDs and DVDs
G Warning
Only insert a CD or DVD when the vehicle is
stationary. There is a risk of accident by be-
ing distracted from road and traffic condi-
tions if you load a CD/DVD while the vehicle
is in motion.
Bear in mind that at a speed of just 30 mph
(appr. 50 km/h), your vehicle is covering a
distance of 44 feet (appr. 14 m) every
second.

55 Audio
CD audio/DVD audio and MP3
Loading the DVD changer
The DVD changer is a magazine with six
built-in compartments.
1Disc slot
2Load/Eject button (all magazine com-
partments)
Loading an individual magazine com-
partment
Press the Load button2.
A menu indicates which magazine com-
partments are currently loaded. The
highlighted or currently playing com-
partment is indicated by a red number.
Magazine menu
To select magazine compartment:
Rotate ymz or slide omp.
To start loading: Press n.
The DVD changer will switch to the se-
lected magazine compartment. The
message “Please Wait...” will be dis-
played.
The message “Please Insert Disc ”
will be displayed.
i Only insert a CD after COMAND has prompt-
ed you to do so with this message. Only insert
one CD per magazine compartment.
Insert a disc into the slot1 with the
printed side upwards.
The DVD changer pulls in the disc and
places it in the selected magazine com-
partment. The message “Loading Disc
” will be displayed.
i The loading process may take a while, de-
pending on the type of disc. If you do not insert a
disc, the display will switch back to the Magazine
menu after approximately 20 seconds.
The DVD changer plays the disc if
it has been inserted correctly
it is a permissible disc.

57 Audio
CD audio/DVD audio and MP3
COMAND supports type I and II 16 bit full-
size PCMCIA memory cards.
i COMAND supports commercially available
PCMCIA cards or PCMCIA card adapters with
storage media that may not be designed for the
temperatures which occur in the vehicle. You
should therefore remove the PCMCIA card from
the vehicle when not in use since extreme tem-
peratures could damage these devices.
1Slot for PCMCIA memory card
Push the PCMCIA memory card into
the slot 1.
The end with the contacts must be
pointing towards the slot.COMAND loads the memory card and
displays the message “Reading memo-
ry card”.
If no MP3 tracks can be found, a mes-
sage will be displayed.
Ejecting from the DVD changer
i If you eject a disc while another is being
played, the DVD changer interrupts playback.
Playback will continue once the disc has been
ejected completely.
Ejecting one disc
Press the Eject button2.
The Magazine menu appears. The mag-
azine compartment with the current
disc is highlighted.1Magazine compartment occupied,
ejecting possible
2Disc type
3Disc name (only if stored on disc)
4Current disc
To select occupied magazine com-
partment: Rotate ymz or slide omp.
Press n.
The message “Ejecting Disc ” will be
displayed. The following message will
then be displayed.
Loading PCMCIA memory card
Ejecting CDs and DVDs
G Warning
Only eject a disc when the vehicle is station-
ary. You may otherwise be distracted from
the traffic conditions and could cause an ac-
cident.

62 Audio
CD audio/DVD audio and MP3
In CD audio, DVD audio and
MP3 mode
To activate playback pause:
Briefly press I.
X appears at the top left of the status
bar.
To resume playback: Briefly press I
again.
X disappears.
In DVD audio mode only
To activate playback pause:
Switch to DVD audio mode.
Select g.
The g display changes to T.
To resume playback:
Switch to DVD audio mode.
Select T.
The T display changes to g.
In CD audio, DVD audio and MP3
mode: Select “Changer”.
or
In CD audio and DVD audio mode
only: Press n if the display/selection
window is highlighted.
The media list appears. The
dotR indicates the medium currently
playing.
Media list
The media list shows you the storage me-
dia currently available:
In the DVD changer (magazine com-
partments 1 to 6)
The following storage media can be
read:
J CD audio, L MP3-CD, K DVD
audio and I DVD video
i If a storage medium is not readable, an entry
appears next to the magazine compartment or a
message is displayed when the memory card is
selected.
PCMCIA memory card M at position 7
Music Register N at position 8
To select storage medium: Rotate
ymz or slide qmr.
Press n.
i If you select a video DVD I, then this
switches the unit to video mode (

page 77).
Pause functionSelecting CD/DVD/MP3 media

63 Audio
CD audio/DVD audio and MP3
i For many operating functions you can also
use the buttons on the multifunction steering
wheel, e.g. the (, &, $ or % but-
tons, for selecting a track or a menu or scrolling
through lists (

page 23).
Selection via track skip
To skip forwards or backwards to a
track: Rotate ymz.
or
Press G or H.
i ‘Forward track skip’ skips to the next track.
‘Backward track skip’ skips to the beginning of
the current track, if the track has been playing
for more than 8 seconds. If the track has been
playing for less than 8 seconds, it will skip to the
beginning of the previous track.
If the playback option “Random Tracks” is
switched on, the track sequence is random.
Selecting via track list
In CD audio/DVD audio mode: Select
“Track” or “Track List”.
or
In MP3 mode: Press n if the display/
selection window is highlighted.The track list appears. The dotRindi-
cates the current track.
To select a track: Rotate ymz or slide
qmr.
Press n.
i In MP3 mode the list displays all tracks in al-
phabetical order.
Display/selection window is high-
lighted: Slide and hold omp until the
desired point is reached.
or
Press and hold G or H on the
control unit until the desired point is
reached.
i The function is only available in MP3 mode.
Switch to MP3 mode (
page 60).
Select “Folder”.
or
Press n if the display/selection win-
dow is highlighted.
The folder list appears.
1Back folder symbol
2Current track
3Track symbol
4Current folder name
Selecting tracks
Fast forward/reverse
Selecting folders

68 Audio
Music Register
i CD information, including album, title, artist
name and track name is obtained from the
Gracenote
® Media Database (
page 64).
In the “Disc” submenu select “REC”.
The Record menu appears on the sub-
menu.
Selecting tracks to be recorded
Rotate ymz or slide omp until
“Tracks” is highlighted.
Press n.
Select tracks to be recorded by switch-
ing the check mark next to each track
entry on or off.
1Record all tracks (default)
2Option for selecting individual tracks
3Confirm selection
i If you do not select individual tracks before
recording, all tracks on the CD will be recorded.
Selecting a destination folder
Rotate ymz or slide omp until
“Folder” is highlighted.
Press n.
1Create new folder (default)
2Existing folders
3Currently active folder
To select folder: Rotate ymz or slide
qmr.
Press n.
i If you do not select a destination folder be-
fore recording, a new folder will be created.
Recording music files

69 Audio
Music Register
Start the reording
Rotate ymz or slide omp until “Start”
is highlighted.
Press n.
In the display information about
source, destination and progress of the
recording is shown.
i The Disc menu re-appears automatically af-
ter a sucessful recording.
To stop the recording: Rotate ymz or
slide omp until “Cancel” is highlighted.
Press n.
The Disc menu re-appears.This function can be used to delete all the
music files in the Music Register.
Select “Music Register” K “Delete All
Music Files”.
A prompt appears. “No” is highlighted.
Do not delete: Press n.
The Music Register menu appears.
To delete: Select “Yes”.
A corresponding message appears.
Select “Music Register” K “Memory In-
fo”.
A window appears containing informa-
tion on:
Memory capacity
Available memory
Occupied memory
Content (folders, tracks)You can view the content of the Music Reg-
ister, change folder/track names and de-
lete individual folders/tracks.
Select “Folder” in the submenu.
1Back folder symbol
2Music file symbol
3Current folder
or
Press n if the display/selection win-
dow is highlighted.
A similar list appears that also shows
the content of the music register.
Deleting all music files
Requesting memory space informa-
tion
Folder functions