2008 Lancia Musa dashboard

191
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
1.3 Multijet 70HP
188A9000
Diesel
4 in line
4
69.6 x 82
1248
18±0.4
51
70
4000
180
18,3
1750
–
Diesel fuel for
motor vehicles
(Specification
EN590)
1.3 Multijet 90HP
199A3000
Diesel
4 in line
4
69.6 x 82
1248
17,6±0.4
66
90
4000
200
20
1750
–
Diesel fuel for
motor vehicles
(Specification
EN590)
ENGINE
INTRODUCTION
Engine code
Cycle
Number and layout of cylinders
Number of valves per cylinder
Piston bore and stroke mm
Total displacement cm3
Compression ratio
Maximum power (EEC) kW
HP
corresponding ratio: rpm
Maximum torque (EEC) Nm
kgm
corresponding ratio: rpm
Spark plugs
Fuel
(▲)Engine provided for some versions/markets only
1.48V(▲)
350A1000
Otto
4 in line
2
72 x 84
1368
11±0.2
57
77
6000
115
11,7
3000
NGK ZKR7A-10
Unleaded petrol
95 RON
(Specification
EN228)1.9 Multijet
188B2000
Diesel
4 in line
2
82 x 90.4
1910
18±1
74
100
4000
260
26.4
2000
–
Diesel fuel for
motor vehicles
(EN590 specifica-
tions) 1.4
16V
843A1000
Otto
4 in line
4
72 x 84
1368
11±0.2
70
95
5800
128
13
4500
NGK ZKR7A-10
Unleaded petrol
95 RON
(Specification
EN228)
187-205 MUSA 3ed GB 12-11-2007 11:40 Pagina 191

192
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
Modifications or repairs to the fuel feed system that are not carried out properly or do not take the system’s
technical specifications into account can cause malfunctions leading to the risk of fire.
(▲) Engine provided for some versions/markets only
FUEL FEED/IGNITION
Fuel feed/ignition
1.48V(▲)-1.416V
Multipoint phased sequential electronic injection,
integrated with ignition,
returnless system1.3 Multijet - 1.9 Multijet
Electronically controlled Multijet “Common Rail”
direct injection, with turbo
and intercooler
TRANSMISSION
Gearbox
Clutch
Drive1.4
16V
Five or six forward gears plus reverse
with synchronisers for forward gears
Self-adjusting external hydraulic control
with pedal without loadless stroke
Fr
ont
1.48V(▲)-1.3 Multijet - 1.9 Multijet
Five forward gears plus reverse
with synchronisers for forward gears
Self-adjusting external hydraulic control
with pedal without loadless stroke
Fr
ont
187-205 MUSA 3ed GB 12-11-2007 11:40 Pagina 192

193
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
BRAKES
Service brakes:– front
– rear
Parking brake
IMPORTANT Water, ice and salt sprinkled on roads can deposit on the brake discs and reduce the braking efficiency when braking for
the first time.1.4
8V(▲)-1.416V- 1.3 Multijet 70HP
Self-ventilating discs (257 mm x 22mm)
Drum (203 mm)
Controlled by hand lever, acting
on rear brakes
SUSPENSIONS
Front
Rear1.4
8V(▲)-1.416V- 1.3 Multijet - 1.9 Multijet
Mc Pherson independent wheels
Semi-independent wheels connected by crank axle
STEERING
Type
Minimum steering
cycle m
(
▲) Engine provided for some versions/markets only1.4
8V(▲)-1.416V- 1.3 Multijet - 1.9 Multijet
Rack and pinion with electric power steering
10.0
1.3 Multijet 90HP - 1.9 Multijet
Self-ventilating discs (284 mm x 22mm)
Drum (228 mm)
Controlled by hand lever, acting on
rear brakes
187-205 MUSA 3ed GB 12-11-2007 11:40 Pagina 193

194
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
WHEELS
RIMS AND TYRES fig. 5
Pressed steel or alloy rims. Tubeless
radial carcass tyres. All approved
tyres are listed in the Log Book.
IMPORTANT In the event of discrep-
ancies between the information pro-
vided on this “Owner handbook” and
the “Log book”, consider the specifi-
cations shown in the log book only.
Respect the prescribed size to ensure
safety of the car in movement. Fit
tyres of the same make and type on
all wheels.
IMPORTANT Do not use inner tubes
with Tubeless tyres.READING TYRE MARKINGS
Example: 185/65 R 14 86 T
185= Nominal width (S, distance in
mm between sidewalls).
65= Height/width ratio (H/S) in
percentage.
R= Radial tyre.
14= Rim diameter in inches (Ø).
86Load rate (capacity).
T= Maximum speed rating.
fig. 5L0D0229m
SMALL SPARE WHEEL
Pressed steel rim Tubeless tyre.
WHEEL GEOMETRY
Toe-in measured between rims: 0 ±1
mm.
The values refer to the car in running
order.
187-205 MUSA 3ed GB 12-11-2007 11:40 Pagina 194

195
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
Load rating (capacity)
60 = 250 kg 84 = 500 kg
61 = 257 kg 85 = 515 kg
62 = 265 kg 86 = 530 kg
63 = 272 kg 87 = 545 kg
64 = 280 kg 88 = 560 kg
65 = 290 kg 89 = 580 kg
66 = 300 kg 90 = 600 kg
67 = 307 kg 91 = 615 kg
68 = 315 kg 92 = 630 kg
69 = 325 kg 93 = 650 kg
70 = 335 kg 94 = 670 kg
71 = 345 kg 95 = 690 kg
72 = 355 kg 96 = 710 kg
73 = 365 kg 97 = 730 kg
74 = 375 kg 98 = 750 kg
75 = 387 kg 99 = 775 kg
76 = 400 kg 100 = 800 kg
77 = 412 kg 101 = 825 kg
78 = 425 kg 102 = 850 kg
79 = 437 kg 103 = 875 kg
80 = 450 kg 104 = 900 kg
81 = 462 kg 105 = 925 kg
82 = 475 kg 106 = 950 kg
83 = 487 kgMaximum speed rating
Q = up to 160 km/h.
R = up to 170 km/h.
S = up to 180 km/h.
T = up to 190 km/h.
U = up to 200 km/h.
H = up to 210 km/h.
V = up to 240 km/h.
W = up to 270 km/h.
Y = up to 300 km/h.READING RIM MARKINGS
Example:6 J x 14 ET 40
6= rim width in inches (1).
J= rim drop centre outline (side
projection where the tyre bead
rests) (2).
14= rim nominal diameter in
inches (corresponds to diame-
ter of the tyre to be mounted)
(3 = Ø).
ET= shape and number of the
“humps” (circumference relief,
holding into its seat the bead
of the Tubeless tyre on the
rim).
40= wheel camber angle (distance
between the disc/rim support-
ing plane and the wheel rim
centre line).
187-205 MUSA 3ed GB 12-11-2007 11:40 Pagina 195

196
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
185/65 R14 86T
195/60 R15 88T
205/50 R16 87V (**)
195/60 R15 88T
205/50 R16 87V (**)185/65 R14 86Q (M+S)
195/60 R15 88Q (M+S)
–
195/60 R15 88Q (M+S)
–4Bx14” (***) 135/80 B14 84M (***)
1.3 Multijet
90 HP
e 1.9 Multijet
4Bx15” 125/80 R15 95M (***)
4Bx15” 125/80 R15 95M
RIMS AND TYRES
(*) Alloy rim on request
(**) Not snow chains
(***) IMPORTANT The 14” small wheel can only be used on 1.4 petrol and 1.3 Multijet 70CV cars with chassis number over
1012200.
VERSIONS RIMS TYRES SMALL SPARE WHEELSupplied Winter type Rim Tyre
alternatively1.4 petrol
and 1.3 Multijet
70 HP
6 Jx14” ET 40
6 Jx15” ET 40 (*)
6 1/2 Jx16” ET 40 (alloy)
6Jx15” ET 40 (*)
6 1/2 Jx16” ET 40 (alloy)
187-205 MUSA 3ed GB 12-11-2007 11:40 Pagina 196

135/80 B14 84M 2.8SMALL SPARE WHEEL
125/80 R15 95M 4.2
197
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
TYRES SUPPLIED
Tyre size Medium load Full load
Front Rear Front Rear
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.
COLD TYRE INFLATION PRESSURES (bar)
185/65 R14 86T 2.2 2.1 2.3 2.3
195/60 R15 88T 2.2 2.1 2.3 2.3
205/50 R16 87V 2.2 2.1 2.3 2.3
187-205 MUSA 3ed GB 12-11-2007 11:40 Pagina 197

198
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
DIMENSIONS
Dimensions are expressed in mm and
refer to the vehicle fitted with stan-
dard tyres.
The height refers to the vehicle un-
laden.
Boot volume
Unladen boot volume
(V.D.A. standards) ............ 390 dm
3
A B C D E F (*) G I
4035 848 2508 679 1660 1444 1698 1431
(*) Track measurements may vary according to rim size.
L0D0451m
187-205 MUSA 3ed GB 12-11-2007 11:40 Pagina 198