2008 Lancia Musa tailgate

14
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
IMPORTANT The remote control fre-
quency may be disturbed by radio
transmissions outside the car (e.g. cel-
lular phones, radio amateurs, etc.). If
this is the case, the remote control
may operate incorrectly.
Door and tailgate locking
Short pressure on button Á: remote
lock of doors, tailgate and fuel flap,
switching off of the internal ceiling
lights and single flashing of direction
indicators. Door and tailgate lock release
Short pressure on button Ë: lock re-
lease of doors, tailgate and fuel flap,
timed switching on of the internal
ceiling lights and double flashing of
direction indicators.
Door locks are automatically released
in case of intervention of the inertial
fuel cut-off switch.
Use the “Setup Menu” of the multi-
functional reconfigurable display (see
the dedicated paragraph in section
“Dashboard and Controls”) to set the
system in such a way that only the
door on the driver’s side is released
when pressing button Ë. To refit metal insert A, proceed as
follows:
❒Press button Band hold it pressed.
❒move the metal insert A.
❒Release button Band turn the
metal insert Auntil hearing the
click that indicates correct locking.
The button
Ëactivates the release de-
vice for doors, tailgate and fuel flap
(where provided).
The button
Áactivates the release de-
vice for doors, tailgate and fuel flap
(where provided).
The button Ractivates opening of
the tailgate.
Press button B-fig. 11 only
after moving the key away
from your body, especially your
eyes, and from objects which could
get damaged (e.g. your clothes). Do
not leave the key unattended, be-
cause someone, a child especially,
may accidentally press the button
while handling the key.
WARNING
fig. 13L0D0378m
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 14

15
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Deterrence led indications
When locking the doors, the deter-
rence LED A-fig. 14on the button
switches on for about 3 seconds.
Then, it starts flashing (deterrence
function). If one or more than one
door or the tailgate does not close cor-
rectly when locking it, the LED and
direction indicators start flashing
quickly.
IMPORTANT The remote control fre-
quency may be disturbed by radio
transmissions outside the car (e.g. cel-
lular phones, radio amateurs, etc.). If
this is the case, the remote control
may operate incorrectly.Door locking from the inside
Keep the doors locked and press the
buttonA-fig. 14positioned at the
centre of the dashboard to either lock
or release the doors.
IMPORTANT If one door is not cor-
rectly locked, or a system fault occurs,
doors cannot be locked from the in-
side.
After eliminating the cause of the
problem, the device resumes regular
operation.Remote tailgate opening fig. 15
Press the button R, and hold it
pressed, to release (open) the tailgate
remotely. Tailgate opening is indicated
by double flashing of the direction in-
dicators; tailgate closing by single
flashing.
IMPORTANT The remote control fre-
quency may be disturbed by radio
transmissions outside the car (e.g. cel-
lular phones, radio amateurs, etc.). If
this is the case, the remote control
may operate incorrectly.
fig. 14L0D0417mfig. 15L0D0378m
If the button for locking
doors from the inside is ac-
cidentally pressed, only the
doors opened for getting out
of the car are released; the tailgate
remains locked. For system reset
press the lock/release buttons again.
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 15

18
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Type of key
Spare
mechanical
key
Main keywith remote control
Direction indicators flashing
(only when key
has remote control)
Deterrence led
Pressing button Ëactivates opening of the fuel flap.
The main functions that can be activated with the keys (with or without remote control) are the following:
Door locking
from the outside
Turn the key
clockwise
(driver’s side)
Turn the key
clockwise
(driver’s side)
Short pressing of
buttonÁ
blinks once
Steady for
approximately 3 seconds
and then
deterrent blinkingUnlocking the
tailgate
Prolonged button pressing
(for over 2 seconds) R
blinks twice
Deterrence led Door lock release
Turn the key
anticlockwise
(driver’s side)
Turn the key
anticlockwise
(driver’s side)
Short pressing
of button Ë
blinks twice
Switching off
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 18

30
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Release of doors and tailgate (Key)
This function enables the release of
the front and rear doors, the release
of the driver's door only or the release
of all the doors including the tailgate.
To set the function, proceed as fol-
lows:
– press the MODEbutton for a short
time, the display shows “Open doors”,
“Op. drv.door” and “Open all”.
– press +or–to select; the selected
item will flash.
– Press MODEfor a short time to re-
turn to the menu screen or press the
button for a longer time to return to
the standard screen without confirm-
ing the selection. – briefly press button MODE: the
month starts flashing on the display;
– press button +or–to set the month;
– briefly press button MODE: the day
starts flashing on the display;
– press button +or–to set the day.
NOTE The setting increases or de-
creases by one unit each time button
+or–is pressed. Hold the button
pressed to start automatic quick in-
crease/decrease of the setting. Com-
plete the setting by briefly pressing
the button when the required setting
is approached.
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go back
to the standard screen without storing
the settings. 12h/24h clock mode
(Clock mode)
This function enables setting the
screen to either 12 or 24 hour mode.
Proceed as follows:
– briefly press button MODE: 12h or
24h starts flashing on the display (de-
pending on the previously set para-
meter);
– press button +or–for selecting the
desired value;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go back
to the standard screen without storing
the settings.
Setting the date (Set Date)
This function enables updating the
date (year - month - day).
To update the date proceed as follows:
– briefly press button MODE: the
year starts flashing on the display;
– briefly press button +or–to set the
year;
007-037 MUSA 3ed GB 12-11-2007 11:33 Pagina 30

42
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Rest position on driver’s side
It is the same procedure as above.
However, the headrest must be re-
moved from the seat on the driver’s
side (see paragraph “Headrest” in this
section).
IMPORTANT Refer to section “Boot
Enlargement” for information on the
operations to be carried out with seats
for enlarging the tailgate. Rest position on passenger’s side
fig. 47
To place the seat in the rest position
keep the rear door open and:
❒bring the passenger’s seat to the
“table” position (see paragraph
“Positioning the seat to be used as
a table” in this section);
❒move the rear seat forwards until
the end of its stroke fig. 48;
❒move the passenger’s seat in table
configuration backwards until the
end of its stroke;
❒remove the rear window shelf (see
paragraph “Removing the rear
window shelf” in this section);
❒tilt the backrest of the rear seat to
the desired position. Adjustment of central box from
luggage compartment
Pull the rope F-fig. 46and at the
same time push the upper part of the
backrest forwards until the stop clip
is released. Move the backrest until it
is positioned horizontally and release
the rope F. To bring the backrest back
to vertical position, repeat the opera-
tion in reverse sequence until the stop
clip is secured.
fig. 46L0D0255mfig. 47L0D0242mfig. 48L0D0243m
038-094 MUSA 3ed GB 12-11-2007 11:35 Pagina 42

80
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
TAILGATE CLOSING
Lower the tailgate by using handle
A-fig. 108as shown in the figure,
then press the tailgate until a lock
click is heard.
IMPORTANT If the “Key” option is
enabled, before closing the tailgate
ensure that you have the ignition key
with you, as the tailgate will be auto-
matically locked.BOOT
The tailgate can only be unlocked
from outside the car by using the elec-
tric opening handle A-fig. 106.
The tailgate can be opened at any
time if car doors are unlocked.
From the set-up menu of the display
located on the instrument panel (see
“Reconfigurable multifunctional dis-
play” in this section) it is possible to
enable the “Key” option in this way,
the boot is not unlocked together with
the doors; press button
Rof the re-
mote control to open.
Tailgate opening is indicated by dou-
ble flashing of direction indicators.
fig. 106L0D0390m
fig. 107L0D0378m
fig. 108L0D0391m
Do not fit additional objects
onto the rear window shelf
or tailgate (speakers, spoil-
ers, etc.) except when con-
templated by the manufacturer to
ensure the correct operation of the
side gas shock absorbers of the tail-
gate itself.
038-094 MUSA 3ed GB 12-11-2007 11:35 Pagina 80

128
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
LOW ENGINE OIL
PRESSURE (red)
EXHAUSTED OIL (red)
(Multijet versions with DPF)
Low engine oil pressure
When the ignition key is moved to
MAR, the warning light turns on and
should go out as soon as the engine is
started.
The display will show the dedicated
message.
v
Exhausted oil
The warning light turns on and
flashes along with the message on the
display when the system detects that
the engine oil is exhausted.
After the first indication, at each en-
gine start-up, the warning light
vcontinues to flash for about 60 sec-
onds and then every 2 hours until the
oil is changed.
If the warning light vturns on when the car is
travelling (on certain versions to-
gether with the message on the dis-
play) stop the engine immediately
and contact Lancia Dealership.
WARNING
If the warning light vflashes, promptly contact
Lancia Dealership in order to have
the oil changed and the warning
light on the instrument panel
turned off.
WARNING
“DUALDRIVE”
ELECTRIC POWER
STEERING FAILURE
(red)
When the ignition key is moved to
MAR, the warning light turns on and
should go off after a few seconds.
If the warning light stays on, the elec-
tric steering system provides no assis-
tance and the effort on the steering
wheel is increased, although steering
is still possible. In this case, go to a
Lancia Dealership.
The display will show the dedicated
message.
g
INCOMPLETE DOOR
LOCKING (red)
On certain versions the
warning light turns on when
one or more doors or the tailgate are
not properly closed.
The display will show the dedicated
message.
A buzzer is triggered when doors/tail-
gate are open and the car is moving.
´
SEAT BELTS NOT
FASTENED (red)
(where provided)
The warning light on the dis-
play lights up when the car is moving
and the driver’s seat belt is not cor-
rectly fastened. The warning light
flashes, and a buzzer is triggered, if
the driver’s seat belt is not correctly
fastened. The buzzer of the S.B.R.
(Seat Belt Reminder) system can be
disabled by the Lancia Dealership
only. The system can be enabled from
the “setup” menu.
<
125-134 MUSA 3ed GB 12-11-2007 11:38 Pagina 128

153
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
IN AN
EMERGENCY
FRONT FOG LIGHTS
(where provided) fig. 25
To replace a fog light bulb, contact a
Lancia Dealership.
fig. 25L0D0406m
REAR LIGHT CLUSTERS
The rear headlights use LED lighting
technology for the sidelights and
brake lights. In the event of malfunc-
tioning, contact a Lancia Dealership.
To change the bulb in the direction in-
dicators, proceed as follows:
❒open the tailgate;
❒turn the fastening device Ain an
anticlockwise direction (for the
left-hand door) or in a clockwise
direction (for the right-hand door)
and remove the covering door;
❒disconnect the electric connector
C;
❒unscrew the two fastening nuts B;
❒to remove the headlight, pull it up
perpendicularly using the handle
on the body of the headlight itself;
❒press down the bulb holder lock-
ing tabs and extract it from its
seat;
❒remove the bulb by pushing it
slightly and turning it in an anti-
clockwise direction;
❒reinstall the bulb holder ensuring
that the two locking tabs are effec-
tively engaged; fit the light unit in
its housing and hook up the elec-
trical connector C; tighten the two
fastening nuts B; refit the coveringdoor taking care to insert the tabs
in their seat and turning the fas-
tening device Ain an anticlockwise
direction (for the left-hand door) or
in a clockwise direction (for the
right-hand door) in order to engage
it.
fig. 26L0D0187m
fig. 27L0D0188m
135-164 MUSA 3ed GB 12-11-2007 11:39 Pagina 153