2008 JEEP WRANGLER UNLIMITED Owners Manual

18. Grasp the swing gate bar and position it into the
swing gate brackets.
19. Apply downward pressure on the top corner of the
rear soft top bow (3–bow), then complete attaching the
sail panel retainers into the body side channel.20. Open the doors and insert the roof retainers into the
channels above the door, starting at the front and work-
ing rearward.
21. Close the header latches and return the sun visors to
their secured position.

3

2. Unclip and move the sun visors to the side.
3. Release the header latches from the loops on the
windshield frame.4. Slide the plastic sleeve forward.

3

To Close
1. Remove straps from side bows.
2. Unclip and move sun visors to the side.
3. Grasp the front header and pull to the front of the
vehicle.
4. Hook header latches to the loops on the windshield
frame, close latches, and return sun visor’s to their
original position.
5. Slide plastic sleeve rearward over Sunrider link.
6. Tuck drip rail retainers into door frame slots.SUNRIDER (FOUR-DOOR MODELS) — IF
EQUIPPED
NOTE:If you are going to be driving faster than 40 mph
(64 km/h) with the Sunrider feature open, it is recom-
mended that you remove the rear window of the vehicle.
To Open
1. Above the front of the rear door, place finger up into
the cutout in the plastic retainer and pull down, rolling
both the front and rear retainers out of the door frame.
Repeat this on the other side.
NOTE: All plastic retainers must be removed from the
door rail prior to the operation of the Sunrider.
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

3

4. Grasp the front side bow behind the header, and lift
the top.5. Fold back the front section of the top, and gently rest
the header on top of the rear portion of the deck.

3