2008 GEELY FC gas type

Chair--Rear chair (separating type)
Rear chair (separating type)
Overhaul
Hint:
When assembling, please work by the sequence opposite with
disassembling sequence, but when it has items that need to
pay special attention, it will add special specification.
1. Disassemble rear row chair cushion assembly.
Pull rear row chair cushion assembly upwards, then disas-
semble it.
Note: when disassembling, it is necessary to hold the
bracket at two sides of fixing clasp, then pull it upwards
to prevent it from distorting.
2. Disassemble rear chair head pillow assembly
[68010077]
3. Disassemble rear row chair backrest assembly.
4. Make the backrest face the front, then disassemble
four fixing clamps.
5. Disassemble four bolts and rear chair backrest
assembly.
6. Disassemble rear row chair right backrest assem-
bly [68010079]
Disassemble the bolt and rear row chair right backrest
assembly.
7. Disassemble rear row chair left backrest assembly
[68010078]
Disassemble two bolts and central backrest hinge.
8. Disassemble exterior cover of rear row backrest
(small).
(a) Disassemble fixing clamp, then disassemble rear row chair
gasket cloth.
(b) Disassemble fixing clamp, then disassemble head pillow
bracket.
(c) Disassemble exterior cover of rear row backrest with gasket.
(d) Disassemble the clamp, then disconnect exterior cover of
rear row backrest with gasket.
9. Disassemble exterior cover of rear row backrest (big).
(a) Disassemble central handrail hinge trim cover.
(b) Disassemble the bolt and central handrail.
A:100mm
Fixing
clasp
Fixing
clasp
 352 
(c) Disassemble fixing clamp, then disassemble rear row chair gasket cloth.
(d) Disassemble the clamp, then disassemble head pillow bracket.
(e) Disassemble exterior cover of rear row backrest with gasket.

Chair--Rear chair (separating type)
(f) Disassemble the clamp, then disconnect exterior cover of
rear row backrest with gasket.
10. Disassemble exterior cover of rear row chair
cushion.
Disassemble the clamp, then disconnect exterior cover of cush-
ion with gasket.
11. Assemble exterior cover of rear row chair cushion.
Use new clamp to assemble exterior cover of rear row chair
Locking loop pliers
 353 
cushion in gasket.
Hint:
zDo not damage or dirty exterior cover of cushion.
zWhen assembling clamp, it is necessary to prevent exterior cover of cushion from crinkling.
12. Assemble exterior cover of rear row chair backrest (big).
Hint:
zDo not damage or dirty exterior cover of cushion.
zWhen assembling clamp, it is necessary to prevent exterior cover of cushion from crinkling.
13. Assemble exterior cover of rear row chair backrest (small).
Use new clamp to assemble exterior cover of rear row chair backrest in gasket.
Hint:
zDo not damage or dirty exterior cover of cushion.
zWhen assembling clamp, it is necessary to prevent exterior cover of cushion from crinkling.
14.Assemble rear backrest central hinge assembly.
Use two bolts to assemble central hinge assembly.
Torque: 20 N
⋅ ⋅⋅ ⋅
⋅m
15. Assemble rear chair backrest side hinge assembly.
Use two bolts to assemble two side hinge assemblies.
16. Assemble rear row chair left backrest assembly [68010078]
Use the bolt to assemble left backrest assembly.
Torque: 8.0 N
⋅ ⋅⋅ ⋅
⋅m
17. Assemble rear row chair right backrest assembly [68010079]
Use the bolt to assemble right backrest assembly.
Torque: 8.0 N
⋅ ⋅⋅ ⋅
⋅m
18. Assemble rear row chair backrest assembly.
Use four bolts to assemble backrest assembly.
Torque: 18 N
⋅ ⋅⋅ ⋅
⋅m

Rear chair (fixing type)
Overhaul
Hint: When assembling, please work by the sequence
opposite with disassembling sequence, but when it has
items that need to pay special attention, it will add special
specification.
1. Disassemble rear row chair cushion assembly.
Pull rear row chair cushion assembly upwards, then disas-
semble it.
Note: when disassembling, it is necessary to hold the
bracket at two sides of fixing clasp, then pull it upwards
to prevent it from distorting.
2. Disassemble rear row chair backrest assembly
[68010076]
Disassemble three bolts and rear row chair backrest assembly.
3. Disassemble rear chair head pillow assembly
[68010077]
4. Disassemble exterior cover of rear row chair
backrest.
(a) Disassemble head pillow bracket.
(b) Disassemble the clamp, then disconnect exterior cover of
rear row chair backrest with gasket.
5. Disassemble exterior cover of rear row chair cushion.
Disassemble the clamp, then disconnect exterior cover of cush-
ion with gasket.
6. Assemble exterior cover of rear row chair cushion.
Use new clamp to assemble exterior cover of rear row chair
cushion in gasket.
Hint: Do not damage or dirty exterior cover of cushion.
When assembling clamp, it is necessary to prevent exterior
cover of cushion from crinkling.
7. Assemble exterior cover of rear row chair backrest.
Use new clamp to assemble exterior cover of rear row chair
backrest in gasket.
Hint: Do not damage or dirty exterior cover of cushion.
When assembling clamp, it is necessary to prevent exterior
cover of cushion from crinkling.
8. Assemble rear row chair backrest assembly
[68010076]
Torque: 8.0 N·m
Chair--Rear chair (fixing type)
Locking loop pliers
Locking loop pliers
A:100mm
 354 

Exterior/inner trim board--Front bumper
Change
Hint:
zWhen assembling, please work by the sequence which is opposite with disassembling
sequence; if necessary, it will have assembling instruction.
zPlease refer to subassembly figure of front bumper on page 379.
1. Disassemble radiator cover assembly [68000094]
(a) Disassemble the bolt and radiator cover assembly.
2. Disassemble inner gasket of left front wheel [68000225]
(a) Use disassembling tool for fixing clamp to disassemble two fixing clamps.
(b) Disassemble the screw and a part of inner gasket of left front wheel.
Hint: Disassemble the fixing clamp of screw and inner gasket of left front wheel in the scope of
front bumper which could be disassembled.
3. Disassemble inner gasket of right front wheel [68000228]
4. Disassemble front bumper [68000005]
(a) Disassemble four screws and two fixing clamps.
(b) Disassemble fixing clasp and front bumper.
(c) Equipping with fog light: disassemble two joints of fog light.
(d) Equipping with radar probe head: disassemble two radar probe heads (luxury type).
5. Disassemble reversing radar probe head assembly.
(a) Disassemble two fixing pedestals of radar probe head and two radar probe heads.
6. Disassemble left front fog light assembly [67000098]
(a) Disassemble fixing clasp and left front fog light assembly.
7. Disassemble right front fog light assembly [67000099]
 380